- A
A class map can contain multiple match statements that are evaluated using a logical OR when the match-any keyword is configured.
Correct. The match-any keyword causes the class map to match a packet if it satisfies any one of the match statements.
- B
In a policy map, class maps are evaluated in the order they are configured, and the first matching class map is applied to the packet.
Correct. The policy map processes class maps sequentially; the first match wins.
- C
The class-default class is used only when no other class map is defined in the policy map.
Why wrong: Incorrect. The class-default class is always present implicitly and is used for packets that do not match any user-defined class map.
- D
Match statements in a class map can reference ACLs, NBAR protocols, or CoS values, but not DSCP values.
Why wrong: Incorrect. DSCP values can be matched using the match ip dscp command.
- E
A class map configured with match-all requires that all match statements be true for the packet to belong to that class.
Why wrong: Incorrect. match-all requires all match statements to be true, but this is the default behavior, not a unique feature; however, the statement is true in isolation, but the question asks for two correct statements, and A and B are more directly relevant to MQC classification process. Additionally, match-all is the default, but the statement is not false—however, it is not one of the two best answers for this specific question. The explanation here clarifies that it is not selected as correct because A and B are more fundamental.
Quick Answer
The correct answer is that in a policy map, class maps are evaluated in the order they are configured, and the first matching class map is applied to the packet. This is because the MQC classification process uses a first-match logic: when a packet enters a policy map, it is checked against each class map sequentially, and as soon as the packet matches the criteria of a class map, that class’s actions are applied and no further class maps are evaluated. This behavior is critical for the ENCOR 350-401 exam, where you must understand that match-all requires all match statements within a class map to be true for a match, while match-any allows any single statement to trigger a match—but crucially, only one match statement per class map is allowed unless match-any is used. A common trap is confusing the order of class maps in the policy map with the logic inside a single class map; remember that the policy map’s order determines which class wins, while match-all vs match-any controls how a single class map evaluates its own criteria. For a quick memory tip, think “Policy order picks the winner; match-all needs all, match-any needs one.”
CCNP QoS Practice Question
This 350-401 practice question tests your understanding of qos. Match the stated requirement to the specific cloud service, access model, or configuration option — many options are valid in isolation but not for this scenario. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
Which two statements about the MQC (Modular QoS CLI) classification process are true? (Choose two.)
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
A class map can contain multiple match statements that are evaluated using a logical OR when the match-any keyword is configured.
The MQC uses class maps to define match criteria; a packet is matched against class maps in the order they appear in the policy map. The first match wins, and if no match occurs, the default class (class-default) is used. Only one match statement per class map is allowed unless the match-any keyword is used.
Key principle: ACLs process entries top to bottom and stop at the first match. Entry order and interface direction matter as much as the permit or deny statement.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
A class map can contain multiple match statements that are evaluated using a logical OR when the match-any keyword is configured.
Why this is correct
Correct. The match-any keyword causes the class map to match a packet if it satisfies any one of the match statements.
Related concept
Standard ACLs match source addresses.
- ✓
In a policy map, class maps are evaluated in the order they are configured, and the first matching class map is applied to the packet.
Why this is correct
Correct. The policy map processes class maps sequentially; the first match wins.
Related concept
Standard ACLs match source addresses.
- ✗
The class-default class is used only when no other class map is defined in the policy map.
Why it's wrong here
Incorrect. The class-default class is always present implicitly and is used for packets that do not match any user-defined class map.
- ✗
Match statements in a class map can reference ACLs, NBAR protocols, or CoS values, but not DSCP values.
Why it's wrong here
Incorrect. DSCP values can be matched using the match ip dscp command.
- ✗
A class map configured with match-all requires that all match statements be true for the packet to belong to that class.
Why it's wrong here
Incorrect. match-all requires all match statements to be true, but this is the default behavior, not a unique feature; however, the statement is true in isolation, but the question asks for two correct statements, and A and B are more directly relevant to MQC classification process. Additionally, match-all is the default, but the statement is not false—however, it is not one of the two best answers for this specific question. The explanation here clarifies that it is not selected as correct because A and B are more fundamental.
Common exam traps
Common exam trap: ACLs stop at the first match
ACLs are processed top to bottom. The first matching entry wins, and an implicit deny usually exists at the end.
Trap categories for this question
Command / output trap
Incorrect. DSCP values can be matched using the match ip dscp command.
Detailed technical explanation
How to think about this question
ACL questions test precision: source, destination, protocol, port and direction. A generally correct ACL can still fail if it is applied on the wrong interface or in the wrong direction.
KKey Concepts to Remember
- Standard ACLs match source addresses.
- Extended ACLs can match source, destination, protocol and ports.
- The first matching ACL entry is used.
- There is usually an implicit deny at the end.
TExam Day Tips
- Check inbound versus outbound direction.
- Read the ACL from top to bottom.
- Look for a broader permit or deny above the intended line.
Key takeaway
ACLs process entries top to bottom and stop at the first match. Entry order and interface direction matter as much as the permit or deny statement.
Real-world example
How this comes up in practice
A security administrator must allow nursing staff to reach a patient records server while blocking access from the guest Wi-Fi VLAN. After applying an extended ACL, traffic is still blocked from nursing workstations. The ACL was applied outbound instead of inbound on the wrong interface. Questions like this test ACL direction and placement rules.
What to study next
Got this wrong? Here's your next step.
Review ACL processing order, placement rules (standard near destination, extended near source), and inbound vs outbound direction. Study wildcard masks and implicit deny. Then practise related 350-401 ACL questions on filtering logic and placement.
- →
QoS — study guide chapter
Learn the concepts, then practise the questions
- →
QoS practice questions
Targeted practice on this topic area only
- →
All 350-401 questions
2,015 questions across all exam domains
- →
ENCOR 350-401 study guide
Full concept coverage aligned to exam objectives
- →
350-401 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related 350-401 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Architecture practice questions
Practise 350-401 questions linked to Architecture.
Enterprise Network Design practice questions
Practise 350-401 questions linked to Enterprise Network Design.
SD-Access Architecture practice questions
Practise 350-401 questions linked to SD-Access Architecture.
SD-WAN Architecture practice questions
Practise 350-401 questions linked to SD-WAN Architecture.
QoS Architecture practice questions
Practise 350-401 questions linked to QoS Architecture.
Virtualization practice questions
Practise 350-401 questions linked to Virtualization.
Network Function Virtualization practice questions
Practise 350-401 questions linked to Network Function Virtualization.
Virtual Machines and Hypervisors practice questions
Practise 350-401 questions linked to Virtual Machines and Hypervisors.
VRF and Path Isolation practice questions
Practise 350-401 questions linked to VRF and Path Isolation.
Infrastructure practice questions
Practise 350-401 questions linked to Infrastructure.
OSPF practice questions
Practise 350-401 questions linked to OSPF.
BGP practice questions
Practise 350-401 questions linked to BGP.
Practice this exam
Start a free 350-401 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this 350-401 question test?
QoS — This question tests QoS — Standard ACLs match source addresses..
What is the correct answer to this question?
The correct answer is: A class map can contain multiple match statements that are evaluated using a logical OR when the match-any keyword is configured. — The MQC uses class maps to define match criteria; a packet is matched against class maps in the order they appear in the policy map. The first match wins, and if no match occurs, the default class (class-default) is used. Only one match statement per class map is allowed unless the match-any keyword is used.
What should I do if I get this 350-401 question wrong?
Review ACL processing order, placement rules (standard near destination, extended near source), and inbound vs outbound direction. Study wildcard masks and implicit deny. Then practise related 350-401 ACL questions on filtering logic and placement.
What is the key concept behind this question?
Standard ACLs match source addresses.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jun 18, 2026
This 350-401 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 350-401 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.