Drag steps to the numbered slots on the right, or tap a step then tap a slot.
Steps
Order
1Step 1
2Step 2
3Step 3
4Step 4
5Step 5
mediumDrag & DropObjective-mapped
CCNP IP SLA UDP Jitter Practice Question
Drag and drop the steps of configuring an IP SLA UDP jitter operation into the correct order, from first to last.
⚠ Common exam trap
A common trap is to think verification comes first; but you must configure before you can verify.
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
Enter global configuration mode
The correct order for configuring an IP SLA UDP jitter operation is: first enter global configuration mode (A), then define the IP SLA operation with type udp-jitter (B), then specify the destination IP address and UDP port (C), then schedule the operation using a start-time (D), and finally verify the operation with 'show ip sla statistics' (E).
About these practice questions
Courseiva writes every 350-401 question from scratch — 1,175 in total, each with an explanation and a wrong-answer breakdown. None are copied from real exams or dumps. Learn why practice questions differ from exam dumps →
JA
Written by Johnson Ajibi, MSc IT Security
Senior Network & Security Engineer · founder of Courseiva
This 350-401 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 350-401 exam.