156-215.81.20 Practice Questions

Question 1

An administrator needs to reset Secure Internal Communication (SIC) on a remote Security Gateway that is currently showing a status of 'Communication Error' in SmartConsole. Which TWO actions must be performed to successfully re-establish the SIC relationship? (Choose TWO)

Accepted Answer

Run cpconfig on the Security Gateway, select the option to reset SIC, and provide a new activation key.. Resetting SIC requires coordination between the Security Management Server database object and the remote gateway operating system. The administrator must initiate the reset state on both ends using the cpconfig utility on the gateway and re-defining the matching activation key within SmartConsole.

Answer

Execute the fwm unloadlocal command directly on the Security Gateway CLI before generating new certificates.

Answer

Restart the database daemon on the management server using cpstop and cpstart commands.

Answer

Reboot the Security Gateway immediately after generating the internal Certificate Authority files.

Question 2

What is the primary function of the 'Read-Only All' Permission Profile in Check Point?

Accepted Answer

Provides visibility without modification capability. The 'Read-Only All' profile is a predefined role that grants visibility into the security policy and management configuration without allowing any modifications. This is highly useful for auditors or junior staff who need to analyze current configurations to troubleshoot issues or generate compliance reports without posing a risk to the production security posture through accidental changes.

Answer

Allows modification of logs but not policies

Answer

Allows policy installation but not modification

Answer

Restricts access to only the log viewer

Question 3

What is the primary function of the 'Permissions Profile' in Check Point SmartConsole?

Accepted Answer

To define the scope of actions an administrator can perform.. Permissions Profiles define the set of actions an administrator is allowed to perform, such as reading policy, editing objects, or installing policy. This is the cornerstone of Role-Based Access Control (RBAC), allowing organizations to enforce separation of duties, which is a fundamental requirement for security audits and ensuring that no single individual has excessive control over the entire security environment.

Answer

To define the authentication method for the administrator.

Answer

To define the IP addresses from which an administrator can log in.

Answer

To define the time of day an administrator can access the console.

Question 4

An administrator wants to ensure that all URLs are categorized correctly. Which tool is used to verify the category of a specific URL?

Accepted Answer

Check Point URL Filtering Online Categorization tool. The 'Check Point URL Filtering Online Categorization' tool is a web-based service where administrators can input a URL to see its current classification in the Check Point database. This is a critical step in troubleshooting, as it helps determine if a site is being blocked due to a misclassification or if the policy is working as intended based on the current database definitions.

Answer

SmartConsole Logs and Monitor

Answer

The gateway CLI command 'fw url_check'

Answer

SmartDashboard Policy Editor

Question 5

Which option is recommended to prevent 'VPN tunnel flapping' when a connection is unstable?

Accepted Answer

Configuring appropriate Dead Peer Detection (DPD) settings.. VPN tunnel flapping often occurs when the connection is intermittently lost, causing the gateway to constantly attempt to renegotiate the tunnel. Configuring a proper rekeying interval and, more importantly, setting up reliable Dead Peer Detection (DPD) helps manage state transitions gracefully. By properly tuning these timers, the administrator ensures that the gateway does not tear down and rebuild tunnels unnecessarily, maintaining a more stable connection during minor packet loss events.

Answer

Increasing the IKE Phase 1 lifetime to infinity.

Answer

Disabling IKE Phase 2 rekeying entirely.

Answer

Using only MD5 for IKE phase 2 authentication.

Question 6

Your organization requires that all log files be rotated when they reach a specific size limit to ensure efficient disk usage. Where should an administrator configure the automatic log rotation settings in SmartConsole?

Accepted Answer

Log Server object properties > Log Management. Log rotation settings are managed within the Log Server properties, specifically under the 'Log Management' section. Proper rotation configuration prevents disk partition overflow, which would stop the Logging process entirely. Managing these settings ensures the Security Management Server maintains performance and data integrity while adhering to the retention policies defined by organizational security requirements for historical log archival and system stability.

Answer

Gateway object properties > Logs

Answer

Global Properties > Log and Alert

Answer

SmartView Monitor > General Settings

Question 7

When configuring Check Point internal users for SmartConsole authentication, what is the best practice for password management?

Accepted Answer

Enforce password complexity and aging policies. Security best practices dictate that administrators should use strong, unique credentials and that the system should enforce password complexity and expiration. Managing internal users directly in the database is common for smaller environments, but it requires diligent maintenance of password policies to prevent unauthorized access to the security management server, which is the heart of the network security infrastructure.

Answer

Allow administrators to use shared accounts for common tasks

Answer

Set account lockout to unlimited attempts

Answer

Disable multi-factor authentication to speed up login

Question 8

Which administrative action requires a 'Publish' operation in a Multi-Admin environment?

Accepted Answer

Committing changes from a private session. In a Multi-Admin environment, changes are made in private sessions. The 'Publish' operation pushes these changes to the main database, making them visible and available to other administrators. This workflow prevents conflicts and ensures that policy changes are reviewed and committed in a structured manner, maintaining the integrity of the security configuration across the entire distributed team.

Answer

Creating a new object in a private session

Answer

Saving the local SmartConsole cache

Answer

Running a 'cpstop' on the server

Question 9

What is the primary function of the 'SmartEvent' blade in the context of logging?

Accepted Answer

To correlate logs and identify security events.. SmartEvent is a powerful correlation engine that transforms raw logs into meaningful security events. It is essential for identifying patterns that span across multiple logs. By categorizing and prioritizing these events, it allows security teams to manage thousands of logs effectively, transforming data overflow into manageable security insights that drive faster decision-making and incident response.

Answer

To store raw logs for long-term audit.

Answer

To manage the deployment of security patches.

Answer

To monitor network bandwidth usage.

Question 10

Refer to the exhibit. An administrator is troubleshooting an issue where 'bob' is unable to access resources. Based on the CLI output, what is the most likely cause for the connectivity failure?

Accepted Answer

The security policy is blocking the traffic.. The CLI output confirms that 'bob' is actively mapped to IP 10.0.0.5 via AD Query with a timeout remaining. Since the identity mapping is confirmed, the issue is not with the Identity Awareness blade itself but rather with the security policy rules. The gateway correctly identifies the user, so the administrator should focus on firewall policy rule matching and the specific network permissions defined for bob's group.

Answer

The AD Query source is failing to communicate.

Answer

The user session has timed out.

Answer

The Identity Awareness blade is disabled.

Question 11

An administrator wants to audit all changes made to the security policy by other administrators. Which tool should they use?

Accepted Answer

The Audit Log in SmartConsole. The Audit Log within SmartConsole is the primary tool for tracking all administrative activity, including who made a change, when it was made, and what the change involved. This is essential for compliance, troubleshooting, and forensics, allowing administrators to maintain a clear history of modifications and ensuring that any unauthorized or accidental changes can be quickly identified and reversed.

Answer

SmartView Monitor

Answer

SmartEvent

Answer

The 'fw log' CLI command

Question 12

Refer to the exhibit. An administrator is configuring RADIUS authentication for Identity Awareness. What is the cause of this error log?

Accepted Answer

The RADIUS server and gateway have mismatched encryption keys.. The 'shared secret mismatch' error explicitly indicates that the RADIUS client (the Security Gateway) and the RADIUS server are using different keys to encrypt their communications. This is a common configuration error in AAA setups. Both the gateway and the server must have an identical, correctly typed shared secret string, or the authentication handshake will be rejected by the server for security reasons.

Answer

The RADIUS server is down.

Answer

The firewall policy is blocking RADIUS traffic.

Answer

The user password is incorrect.

Question 13

What is the primary function of the 'Application Wiki' (AppWiki) in Check Point?

Accepted Answer

It provides a database of application signatures and behavioral patterns.. AppWiki is the centralized, comprehensive database of application signatures used by the gateway to identify traffic. It contains detailed information about thousands of web applications, their protocols, and behavior. By leveraging this database, the gateway can accurately differentiate between legitimate business traffic and unauthorized or risky applications, enabling administrators to write effective, granular rules that control access based on application identity rather than mere IP addresses or ports.

Answer

It stores user identity information.

Answer

It provides a list of all IP addresses associated with web applications.

Answer

It manages the SSL inspection certificates for the gateway.

Question 14

When would an administrator use a 'Custom Application' instead of a standard application in the Application Control blade?

Accepted Answer

When the application is not present in the Check Point database.. Custom Applications are used when the gateway cannot identify a proprietary, internal, or very niche web application using the standard signature database. By defining a custom application based on URL patterns, domains, or specific header content, administrators can extend the reach of the Application Control blade to include internal corporate apps that are not covered by Check Point's public database.

Answer

When the application is blocked by the URL Filtering blade.

Answer

When the application requires HTTPS Inspection.

Answer

When the administrator wants to bypass the security policy.

Question 15

An administrator needs to ensure that traffic from the internal network (10.10.10.0/24) accessing the Internet is translated to the gateway's external interface IP. Which NAT configuration method is required to achieve this while ensuring that the internal IP addresses are never exposed to the Internet?

Accepted Answer

Hide NAT using the gateway's external interface IP.. Hide NAT, also known as Port Address Translation (PAT), is the optimal method for mapping multiple internal source IP addresses to a single public IP address. By utilizing the gateway's external interface, the administrator effectively masks internal addressing. This is critical for security posture, as it limits reconnaissance opportunities and conserves scarce public IPv4 address space while enabling necessary outbound connectivity for private internal hosts.

Answer

Static NAT mapping for each internal host.

Answer

Dynamic NAT without hide enabled.

Answer

Disable NAT and use proxy ARP on the gateway.

Check Point Certified Security Administrator 156-215.81.20 practice test

Three ways to study

Study 156-215.81.20 by domain

Study 156-215.81.20 by topic

User and Access Management practice questions

Application Control and URL Filtering practice questions

Security Policy and NAT practice questions

Monitoring and Logging practice questions

Identity Awareness practice questions

SIC and SmartConsole Management practice questions

VPN Basics practice questions

156-215.81.20 fundamentals practice questions

156-215.81.20 scenario practice questions

156-215.81.20 troubleshooting practice questions

Check Point Certified Security Administrator practice questions