Question 1,079 of 1,733
Design of SAP Workloads on AWSmediumMultiple SelectObjective-mapped

Quick Answer

The answer is a Virtual Private Gateway (VGW) and BGP peering between the on-premises router and the AWS router. A VGW is mandatory because it serves as the attachment point for your VPC to the Direct Connect virtual interface, allowing private IP traffic to flow between your on-premises network and the SAP HANA environment in AWS. Without the VGW, the Direct Connect connection cannot terminate inside the VPC, which is critical for the low-latency, private network path that SAP HANA hybrid connectivity demands. On the AWS Certified SAP on AWS Specialty PAS-C01 exam, this concept tests your understanding of how to establish a dedicated, secure link for SAP workloads, often appearing in scenario-based questions where a candidate might mistakenly choose a VPN-only solution or forget the VGW requirement. A common trap is assuming Direct Connect alone provides VPC access, but the VGW is the essential glue. Memory tip: think of the VGW as the "gatekeeper" that lets Direct Connect into your VPC, while BGP is the "handshake" that keeps routes stable.

PAS-C01 Design of SAP Workloads on AWS Practice Question

This PAS-C01 practice question tests your understanding of design of sap workloads on aws. The scenario asks you to isolate a root cause — eliminate options that address a different problem before choosing. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.

Which TWO of the following are required when integrating SAP HANA with AWS Direct Connect for hybrid connectivity?

Question 1mediummulti select
Full question →

Answer choices

Why each option matters

Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.

Correct answer & explanation

A Virtual Private Gateway attached to the VPC.

A Virtual Private Gateway (VGW) is required to attach the VPC to the Direct Connect connection, enabling private IP traffic between on-premises and the VPC. Without a VGW, the Direct Connect virtual interface cannot terminate within the VPC, making hybrid connectivity impossible for SAP HANA workloads that require low-latency, private network paths.

Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.

Answer analysis

Option-by-option breakdown

For each option: why learners choose it and why it is or isn't the right answer here.

  • A Public Virtual Interface to access the VPC.

    Why it's wrong here

    Public VIF is for public endpoints, not VPC.

  • A Virtual Private Gateway attached to the VPC.

    Why this is correct

    VGW is required for Direct Connect private VIF.

    Related concept

    Read the scenario before looking for a memorised answer.

  • A Direct Connect Gateway for the connection.

    Why it's wrong here

    DX Gateway is optional for single VPC.

  • BGP peering between on-premises router and AWS router.

    Why this is correct

    BGP is used to exchange routes.

    Related concept

    Read the scenario before looking for a memorised answer.

  • A VPN tunnel between on-premises and AWS.

    Why it's wrong here

    Direct Connect is a dedicated connection, not VPN.

Common exam traps

Common exam trap: answer the scenario, not the keyword

The trap here is that candidates confuse a Public Virtual Interface with a Private Virtual Interface, assuming any Direct Connect interface can reach the VPC, but only a Private Virtual Interface combined with a VGW provides private VPC access.

Detailed technical explanation

How to think about this question

Under the hood, the VGW acts as the Amazon-side endpoint for BGP sessions over the Private Virtual Interface, exchanging routes via eBGP (typically using ASN 64512 for the VGW). For SAP HANA, consistent latency below 1 ms is critical, and Direct Connect bypasses internet transit, while the VGW ensures traffic stays within AWS’s private network backbone. In a real-world scenario, if the VGW is not attached, the Direct Connect virtual interface will remain in a 'down' state because there is no target for route propagation.

KKey Concepts to Remember

  • Read the scenario before looking for a memorised answer.
  • Find the constraint that changes the correct option.
  • Eliminate answers that are true in general but not in this case.

TExam Day Tips

  • Watch for words such as best, first, most likely and least administrative effort.
  • Review why wrong options are wrong, not only why the correct option is correct.

Key takeaway

Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.

Real-world example

How this comes up in practice

A company's IT admin needs to give a contractor read-only access to production logs without sharing account credentials. Using role-based access control (RBAC) and temporary scoped permissions — not a permanent shared password — is the correct pattern. Questions like this test whether you can apply least-privilege access across cloud identity services.

What to study next

Got this wrong? Here's your next step.

Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.

Related practice questions

Related PAS-C01 practice-question pages

Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.

Practice this exam

Start a free PAS-C01 practice session

Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.

FAQ

Questions learners often ask

What does this PAS-C01 question test?

Design of SAP Workloads on AWS — This question tests Design of SAP Workloads on AWS — Read the scenario before looking for a memorised answer..

What is the correct answer to this question?

The correct answer is: A Virtual Private Gateway attached to the VPC. — A Virtual Private Gateway (VGW) is required to attach the VPC to the Direct Connect connection, enabling private IP traffic between on-premises and the VPC. Without a VGW, the Direct Connect virtual interface cannot terminate within the VPC, making hybrid connectivity impossible for SAP HANA workloads that require low-latency, private network paths.

What should I do if I get this PAS-C01 question wrong?

Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.

What is the key concept behind this question?

Read the scenario before looking for a memorised answer.

About these practice questions

Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →

How Courseiva writes practice questions · Editorial policy

Keep practising

More PAS-C01 practice questions

Last reviewed: Jun 24, 2026

Question Discussion

Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.

Loading comments…

Sign in to join the discussion.

This PAS-C01 practice question is part of Courseiva's free Amazon Web Services certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the PAS-C01 exam.