Question 1,170 of 1,733
MigrationeasyMultiple ChoiceObjective-mapped

Quick Answer

The answer is 2 subnets. This is correct because the command output explicitly lists two subnets, one in us-east-1a and one in us-east-1b, which directly satisfies the requirement for deploying an SAP system across two Availability Zones for high availability. On the AWS Certified SAP on AWS Specialty PAS-C01 exam, this question tests your ability to read command output and apply it to the subnet count needed for an SAP HA deployment, where each Availability Zone typically requires its own subnet for the application and database layers. A common trap is overcomplicating the answer by assuming you need four subnets for separate tiers, but the question specifically asks how many subnets are available from the output, not how many are theoretically required. Remember the memory tip: for SAP HA across two AZs, count the subnets in the output, not the layers.

PAS-C01 Migration Practice Question

This PAS-C01 practice question tests your understanding of migration. Examine the command output carefully: the correct answer depends on what the output actually shows, not on general recall alone. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.

Network Topology
$ aws ec2 describe-subnetsfilters "Name=tag:Namequery 'Subnets[*].{ID:SubnetIdRefer to the exhibit.```"ID": "subnet-aaa111","AZ": "us-east-1a","CIDR": "10.0.1.0/24"},"ID": "subnet-bbb222","AZ": "us-east-1b","CIDR": "10.0.2.0/24"

An SAP administrator wants to deploy a SAP system across two Availability Zones for high availability. The administrator runs the command shown in the exhibit. How many subnets are available for the deployment?

Question 1easymultiple choice
Review the full subnetting walkthrough →
Network Topology
$ aws ec2 describe-subnetsfilters "Name=tag:Namequery 'Subnets[*].{ID:SubnetIdRefer to the exhibit.```"ID": "subnet-aaa111","AZ": "us-east-1a","CIDR": "10.0.1.0/24"},"ID": "subnet-bbb222","AZ": "us-east-1b","CIDR": "10.0.2.0/24"

Answer choices

Why each option matters

Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.

Correct answer & explanation

2

Option B is correct because the output shows two subnets, one in us-east-1a and one in us-east-1b. Option A is wrong because there are two subnets. Option C is wrong because there are not four. Option D is wrong because there are exactly two.

Key principle: Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.

Answer analysis

Option-by-option breakdown

For each option: why learners choose it and why it is or isn't the right answer here.

  • 4

    Why it's wrong here

    Only two subnets.

  • 2

    Why this is correct

    Two subnets are listed.

    Related concept

    CIDR notation defines the prefix length.

  • 3

    Why it's wrong here

    Only two subnets.

  • 1

    Why it's wrong here

    There are two subnets.

Common exam traps

Common exam trap: usable hosts are not the same as total addresses

Subnetting questions often tempt you into counting all addresses. In normal IPv4 subnets, the network and broadcast addresses are not usable host addresses.

Detailed technical explanation

How to think about this question

Subnetting questions test whether you can identify the network, broadcast address, usable range, mask and correct subnet. Slow down enough to calculate the block size correctly.

KKey Concepts to Remember

  • CIDR notation defines the prefix length.
  • Block size helps identify subnet boundaries.
  • Network and broadcast addresses are not usable hosts in normal IPv4 subnets.
  • The required host count determines the smallest suitable subnet.

TExam Day Tips

  • Write the block size before choosing the subnet.
  • Check whether the question asks for hosts, subnets or a specific address range.
  • Do not confuse /24, /25, /26 and /27 host counts.

Key takeaway

Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.

Real-world example

How this comes up in practice

An e-commerce site experiences heavy traffic on Black Friday and near-zero traffic during off-peak weeks. Rather than provisioning permanent large VMs, the team uses auto-scaling groups that add capacity automatically under load and reduce it overnight. Questions like this test whether you understand elasticity, availability zones, and cloud compute scaling patterns.

What to study next

Got this wrong? Here's your next step.

Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related PAS-C01 subnetting questions on CIDR, address ranges, and subnet selection.

Related practice questions

Related PAS-C01 practice-question pages

Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.

Practice this exam

Start a free PAS-C01 practice session

Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.

FAQ

Questions learners often ask

What does this PAS-C01 question test?

Migration — This question tests Migration — CIDR notation defines the prefix length..

What is the correct answer to this question?

The correct answer is: 2 — Option B is correct because the output shows two subnets, one in us-east-1a and one in us-east-1b. Option A is wrong because there are two subnets. Option C is wrong because there are not four. Option D is wrong because there are exactly two.

What should I do if I get this PAS-C01 question wrong?

Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related PAS-C01 subnetting questions on CIDR, address ranges, and subnet selection.

What is the key concept behind this question?

CIDR notation defines the prefix length.

About these practice questions

Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →

How Courseiva writes practice questions · Editorial policy

Last reviewed: Jun 20, 2026

Question Discussion

Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.

Loading comments…

Sign in to join the discussion.

This PAS-C01 practice question is part of Courseiva's free Amazon Web Services certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the PAS-C01 exam.