- A
Confirm that the target instances are registered in the target group and are in the Available state.
Unregistered or stopped instances will not receive traffic.
- B
Check the security group rules on the target instances to ensure they allow traffic from the NLB's subnet.
Security groups must allow health check traffic.
- C
Verify that the health check settings on the NLB target group are correct (e.g., ping path, port, protocol).
Incorrect health check settings can cause false unhealthy status.
- D
Enable cross-zone load balancing on the NLB.
Why wrong: Cross-zone load balancing does not fix health check issues.
- E
Review the CloudWatch metrics for the NLB to see if there are any anomalies.
Why wrong: CloudWatch metrics show symptoms but not root cause.
PAS-C01 Operations and Maintenance Practice Question
This PAS-C01 practice question tests your understanding of operations and maintenance. The scenario asks you to isolate a root cause — eliminate options that address a different problem before choosing. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A company runs SAP NetWeaver on AWS and uses a Network Load Balancer (NLB) to distribute traffic to multiple application servers. The operations team notices that the NLB is not properly routing traffic to healthy targets. Which three steps should the team take to diagnose the issue? (Choose THREE.)
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Confirm that the target instances are registered in the target group and are in the Available state.
Option A is correct because health check targets must be configured correctly on the NLB. Option C is correct because security groups on targets must allow health check traffic from the NLB. Option E is correct because checking target group registration ensures the instances are in the group. Option B is wrong because CloudWatch alarms indicate issues but not the cause. Option D is wrong because enabling cross-zone load balancing does not affect health checks.
Key principle: Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
Confirm that the target instances are registered in the target group and are in the Available state.
Why this is correct
Unregistered or stopped instances will not receive traffic.
Related concept
CIDR notation defines the prefix length.
- ✓
Check the security group rules on the target instances to ensure they allow traffic from the NLB's subnet.
Why this is correct
Security groups must allow health check traffic.
Related concept
CIDR notation defines the prefix length.
- ✓
Verify that the health check settings on the NLB target group are correct (e.g., ping path, port, protocol).
Why this is correct
Incorrect health check settings can cause false unhealthy status.
Related concept
CIDR notation defines the prefix length.
- ✗
Enable cross-zone load balancing on the NLB.
Why it's wrong here
Cross-zone load balancing does not fix health check issues.
- ✗
Review the CloudWatch metrics for the NLB to see if there are any anomalies.
Why it's wrong here
CloudWatch metrics show symptoms but not root cause.
Common exam traps
Common exam trap: usable hosts are not the same as total addresses
Subnetting questions often tempt you into counting all addresses. In normal IPv4 subnets, the network and broadcast addresses are not usable host addresses.
Trap categories for this question
Command / output trap
CloudWatch metrics show symptoms but not root cause.
Detailed technical explanation
How to think about this question
Subnetting questions test whether you can identify the network, broadcast address, usable range, mask and correct subnet. Slow down enough to calculate the block size correctly.
KKey Concepts to Remember
- CIDR notation defines the prefix length.
- Block size helps identify subnet boundaries.
- Network and broadcast addresses are not usable hosts in normal IPv4 subnets.
- The required host count determines the smallest suitable subnet.
TExam Day Tips
- Write the block size before choosing the subnet.
- Check whether the question asks for hosts, subnets or a specific address range.
- Do not confuse /24, /25, /26 and /27 host counts.
Key takeaway
Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.
Real-world example
How this comes up in practice
A healthcare organisation deploys an application with a public-facing web tier and a private database tier. The database subnet has no public IP and only accepts connections from the web tier's security group. Questions like this test whether you can design cloud network isolation using VNets/VPCs, subnets, and security group rules.
What to study next
Got this wrong? Here's your next step.
Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related PAS-C01 subnetting questions on CIDR, address ranges, and subnet selection.
- →
Operations and Maintenance — study guide chapter
Learn the concepts, then practise the questions
- →
Operations and Maintenance practice questions
Targeted practice on this topic area only
- →
All PAS-C01 questions
1,733 questions across all exam domains
- →
AWS Certified SAP on AWS Specialty PAS-C01 study guide
Full concept coverage aligned to exam objectives
- →
PAS-C01 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related PAS-C01 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Design of SAP Workloads on AWS practice questions
Practise PAS-C01 questions linked to Design of SAP Workloads on AWS.
Technology practice questions
Practise PAS-C01 questions linked to Technology.
Migration practice questions
Practise PAS-C01 questions linked to Migration.
Operations and Maintenance practice questions
Practise PAS-C01 questions linked to Operations and Maintenance.
PAS-C01 fundamentals practice questions
Practise PAS-C01 questions linked to PAS-C01 fundamentals.
PAS-C01 scenario practice questions
Practise PAS-C01 questions linked to PAS-C01 scenario.
PAS-C01 troubleshooting practice questions
Practise PAS-C01 questions linked to PAS-C01 troubleshooting.
Practice this exam
Start a free PAS-C01 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this PAS-C01 question test?
Operations and Maintenance — This question tests Operations and Maintenance — CIDR notation defines the prefix length..
What is the correct answer to this question?
The correct answer is: Confirm that the target instances are registered in the target group and are in the Available state. — Option A is correct because health check targets must be configured correctly on the NLB. Option C is correct because security groups on targets must allow health check traffic from the NLB. Option E is correct because checking target group registration ensures the instances are in the group. Option B is wrong because CloudWatch alarms indicate issues but not the cause. Option D is wrong because enabling cross-zone load balancing does not affect health checks.
What should I do if I get this PAS-C01 question wrong?
Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related PAS-C01 subnetting questions on CIDR, address ranges, and subnet selection.
What is the key concept behind this question?
CIDR notation defines the prefix length.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jun 20, 2026
This PAS-C01 practice question is part of Courseiva's free Amazon Web Services certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the PAS-C01 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.