Question 280 of 1,733
MigrationmediumMultiple ChoiceObjective-mapped

Quick Answer

The answer is to use EC2 instance types listed in the SAP Certified and Supported SAP HANA Hardware Directory. This is correct because SAP license compliance on AWS hinges on running workloads only on hardware that SAP has explicitly certified and published in its official directory; AWS provides a specific list of certified EC2 instances for SAP HANA and NetWeaver, and using any instance outside this list violates SAP’s licensing terms, regardless of whether you bring your own license. On the AWS Certified SAP on AWS Specialty PAS-C01 exam, this question tests your understanding that verification is a separate step from license management—a common trap is confusing AWS License Manager (which tracks usage) or AWS Config (which monitors configuration) with the actual certification check. The key memory tip is “Directory first, license second”—always verify the instance type against the SAP Hardware Directory before worrying about BYOL or tracking tools.

PAS-C01 Migration Practice Question

This PAS-C01 practice question tests your understanding of migration. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.

A company is migrating its SAP environment to AWS and needs to ensure that the SAP license compliance is maintained. What should the company do to verify that the EC2 instances used for SAP are properly licensed?

Question 1mediummultiple choice
Full question →

Answer choices

Why each option matters

Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.

Correct answer & explanation

Use EC2 instance types listed in the SAP Certified and Supported SAP HANA Hardware Directory

AWS provides a list of EC2 instance types that are certified for SAP. The company should use these certified types and ensure they have the appropriate SAP licenses. Option B is correct. Option A (BYOL) is possible but not verification. Option C (AWS License Manager) tracks licenses but doesn't verify SAP compatibility. Option D (AWS Config) can track configuration but not licensing.

Key principle: NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.

Answer analysis

Option-by-option breakdown

For each option: why learners choose it and why it is or isn't the right answer here.

  • Use AWS License Manager to enforce license limits

    Why it's wrong here

    License Manager tracks licenses but doesn't verify SAP certification.

  • Use only bring-your-own-license (BYOL) instances

    Why it's wrong here

    BYOL is a licensing model, not verification.

  • Use AWS Config rules to check instance types

    Why it's wrong here

    Config can check instance types but not SAP licensing.

  • Use EC2 instance types listed in the SAP Certified and Supported SAP HANA Hardware Directory

    Why this is correct

    The SAP HANA Hardware Directory lists certified instances.

    Related concept

    Static NAT maps one inside address to one outside address.

Common exam traps

Common exam trap: NAT rules depend on direction and matching traffic

NAT is not only about the public address. The inside/outside interface roles and the ACL or rule that matches traffic are just as important.

Detailed technical explanation

How to think about this question

NAT questions usually test address translation, overload/PAT behaviour, static mappings and whether the right traffic is being translated. Read the interface direction and address terms carefully.

KKey Concepts to Remember

  • Static NAT maps one inside address to one outside address.
  • PAT allows many inside hosts to share one public address using ports.
  • Inside local and inside global describe the private and translated addresses.
  • NAT ACLs identify traffic for translation, not always security filtering.

TExam Day Tips

  • Identify inside and outside interfaces first.
  • Check whether the scenario needs static NAT, dynamic NAT or PAT.
  • Do not confuse NAT matching ACLs with normal packet-filtering intent.

Key takeaway

NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.

Real-world example

How this comes up in practice

A cloud solutions architect for a retail company is evaluating services for a new workload. The correct answer here reflects best practice for the specific scenario described — not a general cloud recommendation. NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated. Cloud exam questions reward reading the constraint carefully: the same technology can be right or wrong depending on the use case.

What to study next

Got this wrong? Here's your next step.

Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related PAS-C01 NAT questions on configuration and troubleshooting.

Related practice questions

Related PAS-C01 practice-question pages

Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.

Practice this exam

Start a free PAS-C01 practice session

Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.

FAQ

Questions learners often ask

What does this PAS-C01 question test?

Migration — This question tests Migration — Static NAT maps one inside address to one outside address..

What is the correct answer to this question?

The correct answer is: Use EC2 instance types listed in the SAP Certified and Supported SAP HANA Hardware Directory — AWS provides a list of EC2 instance types that are certified for SAP. The company should use these certified types and ensure they have the appropriate SAP licenses. Option B is correct. Option A (BYOL) is possible but not verification. Option C (AWS License Manager) tracks licenses but doesn't verify SAP compatibility. Option D (AWS Config) can track configuration but not licensing.

What should I do if I get this PAS-C01 question wrong?

Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related PAS-C01 NAT questions on configuration and troubleshooting.

What is the key concept behind this question?

Static NAT maps one inside address to one outside address.

About these practice questions

Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →

How Courseiva writes practice questions · Editorial policy

Same concept, more angles

1 more ways this is tested on PAS-C01

These questions test the same concept from different angles. Work through them to make sure you can recognise it however the exam phrases it.

Variation 1. A company is migrating a SAP system to AWS and needs to ensure that the SAP license is compliant. The current license is based on the number of users. What is the correct approach for SAP licensing on AWS?

medium
  • A.Purchase a SAP license through AWS Marketplace that is included in the EC2 instance cost.
  • B.Use AWS License Manager to track the number of vCPUs and report to SAP.
  • C.Bring your own SAP license to AWS and ensure compliance with the user-based metric.
  • D.Use AWS License Manager to convert the user-based license to a processor-based license.

Why C: Option C is correct because SAP licensing on AWS follows the same model as on-premises; the customer must license the SAP software based on users or engine size. Option A is wrong because AWS does not offer bring-your-own-license for all SAP products, but it is allowed. Option B is wrong because AWS does not include SAP licenses. Option D is wrong because AWS does not provide SAP licenses.

Keep practising

More PAS-C01 practice questions

Last reviewed: Jun 20, 2026

Question Discussion

Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.

Loading comments…

Sign in to join the discussion.

This PAS-C01 practice question is part of Courseiva's free Amazon Web Services certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the PAS-C01 exam.