- A
Use AWS Snowball to transfer the initial Oracle data dump to AWS.
Why wrong: Snowball is for offline data transfer, not for near-zero downtime.
- B
Use SAP HANA System Replication (HSR) for the final synchronization.
HSR can be used to keep the HANA target in sync during the cutover.
- C
Use EC2 Hibernate to pause the source instance during cutover.
Hibernate can pause the instance to speed up the final cutover, but is not a replication method.
- D
Use AWS Database Migration Service (DMS) for ongoing replication from Oracle to HANA.
DMS supports minimal downtime migration by replicating changes continuously.
- E
Use Amazon EBS Snapshots for point-in-time recovery and replication.
Why wrong: Snapshots are for backup, not for continuous replication.
PAS-C01 Technology Practice Question
This PAS-C01 practice question tests your understanding of technology. Match the stated requirement to the specific cloud service, access model, or configuration option — many options are valid in isolation but not for this scenario. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A company is migrating its SAP ECC system to SAP S/4HANA on AWS. The current database is running on Oracle. They want to minimize downtime during the migration. Which THREE services or features should they consider to achieve a near-zero downtime migration? (Select THREE.)
Clue words in this question
Noticing these words before you look at the options changes how you read each choice.
Clue:
"minimum / minimize"Why it matters: Asks for the least resource use — fewest addresses, smallest subnet, lowest overhead. Eliminate over-provisioned options even if they would technically work.
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Use SAP HANA System Replication (HSR) for the final synchronization.
Options A, C, and D are correct. AWS DMS can replicate data from Oracle to SAP HANA with minimal downtime. SAP HANA System Replication can be used for the final sync. EBS Snapshots provide a backup and restore option but are not for zero downtime. Option B (Snowball) is for large data transfer, not for ongoing replication. Option E (EC2 Hibernate) is not applicable for database migration.
Key principle: NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
Use AWS Snowball to transfer the initial Oracle data dump to AWS.
Why it's wrong here
Snowball is for offline data transfer, not for near-zero downtime.
- ✓
Use SAP HANA System Replication (HSR) for the final synchronization.
Why this is correct
HSR can be used to keep the HANA target in sync during the cutover.
Clue confirmation
The clue word "minimum / minimize" in the question point toward this answer.
Related concept
Static NAT maps one inside address to one outside address.
- ✓
Use EC2 Hibernate to pause the source instance during cutover.
Why this is correct
Hibernate can pause the instance to speed up the final cutover, but is not a replication method.
Clue confirmation
The clue word "minimum / minimize" in the question point toward this answer.
Related concept
Static NAT maps one inside address to one outside address.
- ✓
Use AWS Database Migration Service (DMS) for ongoing replication from Oracle to HANA.
Why this is correct
DMS supports minimal downtime migration by replicating changes continuously.
Clue confirmation
The clue word "minimum / minimize" in the question point toward this answer.
Related concept
Static NAT maps one inside address to one outside address.
- ✗
Use Amazon EBS Snapshots for point-in-time recovery and replication.
Why it's wrong here
Snapshots are for backup, not for continuous replication.
Common exam traps
Common exam trap: NAT rules depend on direction and matching traffic
NAT is not only about the public address. The inside/outside interface roles and the ACL or rule that matches traffic are just as important.
Detailed technical explanation
How to think about this question
NAT questions usually test address translation, overload/PAT behaviour, static mappings and whether the right traffic is being translated. Read the interface direction and address terms carefully.
KKey Concepts to Remember
- Static NAT maps one inside address to one outside address.
- PAT allows many inside hosts to share one public address using ports.
- Inside local and inside global describe the private and translated addresses.
- NAT ACLs identify traffic for translation, not always security filtering.
TExam Day Tips
- Identify inside and outside interfaces first.
- Check whether the scenario needs static NAT, dynamic NAT or PAT.
- Do not confuse NAT matching ACLs with normal packet-filtering intent.
Key takeaway
NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.
Real-world example
How this comes up in practice
A cloud solutions architect for a retail company is evaluating services for a new workload. The correct answer here reflects best practice for the specific scenario described — not a general cloud recommendation. NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated. Cloud exam questions reward reading the constraint carefully: the same technology can be right or wrong depending on the use case.
What to study next
Got this wrong? Here's your next step.
Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related PAS-C01 NAT questions on configuration and troubleshooting.
- →
Technology — study guide chapter
Learn the concepts, then practise the questions
- →
Technology practice questions
Targeted practice on this topic area only
- →
All PAS-C01 questions
1,733 questions across all exam domains
- →
AWS Certified SAP on AWS Specialty PAS-C01 study guide
Full concept coverage aligned to exam objectives
- →
PAS-C01 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related PAS-C01 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Design of SAP Workloads on AWS practice questions
Practise PAS-C01 questions linked to Design of SAP Workloads on AWS.
Technology practice questions
Practise PAS-C01 questions linked to Technology.
Migration practice questions
Practise PAS-C01 questions linked to Migration.
Operations and Maintenance practice questions
Practise PAS-C01 questions linked to Operations and Maintenance.
PAS-C01 fundamentals practice questions
Practise PAS-C01 questions linked to PAS-C01 fundamentals.
PAS-C01 scenario practice questions
Practise PAS-C01 questions linked to PAS-C01 scenario.
PAS-C01 troubleshooting practice questions
Practise PAS-C01 questions linked to PAS-C01 troubleshooting.
Practice this exam
Start a free PAS-C01 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this PAS-C01 question test?
Technology — This question tests Technology — Static NAT maps one inside address to one outside address..
What is the correct answer to this question?
The correct answer is: Use SAP HANA System Replication (HSR) for the final synchronization. — Options A, C, and D are correct. AWS DMS can replicate data from Oracle to SAP HANA with minimal downtime. SAP HANA System Replication can be used for the final sync. EBS Snapshots provide a backup and restore option but are not for zero downtime. Option B (Snowball) is for large data transfer, not for ongoing replication. Option E (EC2 Hibernate) is not applicable for database migration.
What should I do if I get this PAS-C01 question wrong?
Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related PAS-C01 NAT questions on configuration and troubleshooting.
Are there clue words in this question I should notice?
Yes — watch for: "minimum / minimize". Asks for the least resource use — fewest addresses, smallest subnet, lowest overhead. Eliminate over-provisioned options even if they would technically work.
What is the key concept behind this question?
Static NAT maps one inside address to one outside address.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jun 20, 2026
This PAS-C01 practice question is part of Courseiva's free Amazon Web Services certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the PAS-C01 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.