- A
Allow s3:PutObject on arn:aws:s3:::build-artifacts-prod/* and allow s3:ListBucket on arn:aws:s3:::build-artifacts-prod with no condition.
Why wrong: This is too permissive because PutObject is scoped to the entire bucket (arn:aws:s3:::build-artifacts-prod/*), allowing uploads outside teamA/. It also allows ListBucket for the full bucket without any s3:prefix condition, so the pipeline could list other prefixes.
- B
Allow s3:PutObject on arn:aws:s3:::build-artifacts-prod/teamA/* and allow s3:ListBucket on arn:aws:s3:::build-artifacts-prod with a condition that requires s3:prefix equals 'teamA/'.
This scopes uploads to exactly the teamA/ object path by using the object ARN arn:aws:s3:::build-artifacts-prod/teamA/*. For listing, it targets the bucket ARN (arn:aws:s3:::build-artifacts-prod) and restricts listing results to only the requested prefix using the s3:prefix condition key.
- C
Allow s3:PutObject on arn:aws:s3:::build-artifacts-prod/teamA/* and allow s3:GetBucketLocation on arn:aws:s3:::build-artifacts-prod/teamA/.
Why wrong: GetBucketLocation is not required to satisfy the listed controls (upload only to teamA/ and list only within teamA/). Additionally, scoping GetBucketLocation to a prefix is not the right control for restricting ListBucket results; the missing piece is the constrained s3:ListBucket permission with an s3:prefix condition.
- D
Allow s3:* on arn:aws:s3:::build-artifacts-prod/teamA/* and allow s3:ListAllMyBuckets for easier auditing.
Why wrong: s3:* is broader than needed and can grant permissions such as DeleteObject or other read/write capabilities beyond what is required. ListAllMyBuckets is unrelated to preventing access to other prefixes within the target bucket and expands exposure outside the intended control boundary.
Quick Answer
The answer is to allow s3:PutObject on arn:aws:s3:::build-artifacts-prod/teamA/* and allow s3:ListBucket on the bucket with a condition key of s3:prefix equals 'teamA/'. This design enforces least privilege by scoping the upload action to the exact prefix path, preventing the pipeline from writing to any other location, while the ListBucket action is conditionally restricted so the pipeline can only see objects under teamA/ and cannot list other prefixes. On the SAA-C03 exam, this scenario tests your understanding of combining resource-level ARN restrictions with IAM condition keys to achieve granular access control—a common trap is granting s3:ListBucket without a prefix condition, which would allow listing the entire bucket. Remember the memory tip: "Put on the path, List with the condition" to pair the action with its proper scope.
SAA-C03 Design Secure Architectures Practice Question
This SAA-C03 practice question tests your understanding of design secure architectures. The scenario asks you to isolate a root cause — eliminate options that address a different problem before choosing. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A CI pipeline in account A uploads build artifacts to an S3 bucket (arn:aws:s3:::build-artifacts-prod) under the prefix teamA/. The pipeline must not be able to list other prefixes, and it must only upload objects under teamA/. Which IAM policy design best enforces least privilege for this requirement?
Clue words in this question
Noticing these words before you look at the options changes how you read each choice.
Clue:
"best"Why it matters: Signals that multiple options may be partially correct. Choose the option that most directly solves the exact problem described, not the one that sounds most complete.
Clue:
"least"Why it matters: You want the option with minimum overhead, fewest steps, or lowest impact — not the most feature-rich or comprehensive answer.
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Allow s3:PutObject on arn:aws:s3:::build-artifacts-prod/teamA/* and allow s3:ListBucket on arn:aws:s3:::build-artifacts-prod with a condition that requires s3:prefix equals 'teamA/'.
Option B is correct because it grants the minimal permissions required: s3:PutObject is scoped to the specific prefix teamA/*, preventing uploads to other prefixes, and s3:ListBucket is allowed only with a condition that restricts the s3:prefix to 'teamA/', ensuring the pipeline cannot list objects under other prefixes. This enforces least privilege by combining resource-level and condition-based access control.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
Allow s3:PutObject on arn:aws:s3:::build-artifacts-prod/* and allow s3:ListBucket on arn:aws:s3:::build-artifacts-prod with no condition.
Why it's wrong here
This is too permissive because PutObject is scoped to the entire bucket (arn:aws:s3:::build-artifacts-prod/*), allowing uploads outside teamA/. It also allows ListBucket for the full bucket without any s3:prefix condition, so the pipeline could list other prefixes.
- ✓
Allow s3:PutObject on arn:aws:s3:::build-artifacts-prod/teamA/* and allow s3:ListBucket on arn:aws:s3:::build-artifacts-prod with a condition that requires s3:prefix equals 'teamA/'.
Why this is correct
This scopes uploads to exactly the teamA/ object path by using the object ARN arn:aws:s3:::build-artifacts-prod/teamA/*. For listing, it targets the bucket ARN (arn:aws:s3:::build-artifacts-prod) and restricts listing results to only the requested prefix using the s3:prefix condition key.
Clue confirmation
The clue words "best", "least" in the question point toward this answer.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
Allow s3:PutObject on arn:aws:s3:::build-artifacts-prod/teamA/* and allow s3:GetBucketLocation on arn:aws:s3:::build-artifacts-prod/teamA/.
Why it's wrong here
GetBucketLocation is not required to satisfy the listed controls (upload only to teamA/ and list only within teamA/). Additionally, scoping GetBucketLocation to a prefix is not the right control for restricting ListBucket results; the missing piece is the constrained s3:ListBucket permission with an s3:prefix condition.
- ✗
Allow s3:* on arn:aws:s3:::build-artifacts-prod/teamA/* and allow s3:ListAllMyBuckets for easier auditing.
Why it's wrong here
s3:* is broader than needed and can grant permissions such as DeleteObject or other read/write capabilities beyond what is required. ListAllMyBuckets is unrelated to preventing access to other prefixes within the target bucket and expands exposure outside the intended control boundary.
Common exam traps
Common exam trap: answer the scenario, not the keyword
The trap here is that candidates often assume that scoping the resource ARN to a prefix (e.g., arn:aws:s3:::bucket/prefix/*) alone is sufficient to restrict listing, but without a condition on s3:ListBucket, the ListBucket action still returns all objects in the bucket, bypassing the intended restriction.
Detailed technical explanation
How to think about this question
The s3:ListBucket action with a condition key s3:prefix is evaluated at the bucket level; the condition restricts the list operation to only return objects whose key starts with the specified prefix, effectively implementing a virtual directory. Under the hood, S3 uses a flat key-value store, so prefix-based filtering is essential for access control without hierarchical folders, and the condition must exactly match the prefix used in the resource ARN for PutObject to maintain consistency.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
TExam Day Tips
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A media company stores terabytes of video archives that are accessed once a year for audit purposes. Moving these objects to a cold storage tier (Azure Archive, S3 Glacier, or Google Nearline) costs a fraction of hot storage. Questions like this test whether you understand storage tiers, access frequency tradeoffs, and retrieval latency requirements.
What to study next
Got this wrong? Here's your next step.
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
- →
Design Secure Architectures — study guide chapter
Learn the concepts, then practise the questions
- →
Design Secure Architectures practice questions
Targeted practice on this topic area only
- →
All SAA-C03 questions
1,040 questions across all exam domains
- →
SAA-C03 study guide
Full concept coverage aligned to exam objectives
- →
SAA-C03 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related SAA-C03 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Design Secure Architectures practice questions
Practise SAA-C03 questions linked to Design Secure Architectures.
Design Resilient Architectures practice questions
Practise SAA-C03 questions linked to Design Resilient Architectures.
Design High-Performing Architectures practice questions
Practise SAA-C03 questions linked to Design High-Performing Architectures.
Design Cost-Optimized Architectures practice questions
Practise SAA-C03 questions linked to Design Cost-Optimized Architectures.
SAA-C03 VPC practice questions
Practise SAA-C03 questions linked to SAA-C03 VPC.
SAA-C03 S3 lifecycle policy questions
Practise SAA-C03 questions linked to SAA-C03 S3 lifecycle policy questions.
SAA-C03 RDS Multi-AZ questions
Practise SAA-C03 questions linked to SAA-C03 RDS Multi-AZ questions.
SAA-C03 IAM policy practice questions
Practise SAA-C03 questions linked to SAA-C03 IAM policy.
SAA-C03 Route 53 failover questions
Practise SAA-C03 questions linked to SAA-C03 Route 53 failover questions.
SAA-C03 CloudFront practice questions
Practise SAA-C03 questions linked to SAA-C03 CloudFront.
SAA-C03 NAT gateway questions
Practise SAA-C03 questions linked to SAA-C03 NAT gateway questions.
SAA-C03 VPC endpoint questions
Practise SAA-C03 questions linked to SAA-C03 VPC endpoint questions.
Practice this exam
Start a free SAA-C03 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this SAA-C03 question test?
Design Secure Architectures — This question tests Design Secure Architectures — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: Allow s3:PutObject on arn:aws:s3:::build-artifacts-prod/teamA/* and allow s3:ListBucket on arn:aws:s3:::build-artifacts-prod with a condition that requires s3:prefix equals 'teamA/'. — Option B is correct because it grants the minimal permissions required: s3:PutObject is scoped to the specific prefix teamA/*, preventing uploads to other prefixes, and s3:ListBucket is allowed only with a condition that restricts the s3:prefix to 'teamA/', ensuring the pipeline cannot list objects under other prefixes. This enforces least privilege by combining resource-level and condition-based access control.
What should I do if I get this SAA-C03 question wrong?
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
Are there clue words in this question I should notice?
Yes — watch for: "best", "least". Signals that multiple options may be partially correct. Choose the option that most directly solves the exact problem described, not the one that sounds most complete.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jun 11, 2026
This SAA-C03 practice question is part of Courseiva's free Amazon Web Services certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the SAA-C03 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.