Question 152 of 1,040
Design Resilient ArchitecturesmediumMultiple SelectObjective-mapped

SAA-C03 Design Resilient Architectures Practice Question

This SAA-C03 practice question tests your understanding of design resilient architectures. The scenario asks you to isolate a root cause — eliminate options that address a different problem before choosing. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.

A fintech company needs a disaster recovery design for a web application in two Regions. The business requires an RPO of 15 minutes and an RTO under 2 hours, but it cannot afford to keep a full production stack running in both Regions all the time. Which two DR strategies best fit the requirement? Select two.

Clue words in this question

Noticing these words before you look at the options changes how you read each choice.

  • Clue: "best"

    Why it matters: Signals that multiple options may be partially correct. Choose the option that most directly solves the exact problem described, not the one that sounds most complete.

Answer choices

Why each option matters

Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.

Correct answer & explanation

Pilot light with critical data and minimal services pre-staged in the secondary Region.

A pilot light strategy is correct because it pre-stages only critical data (e.g., database replication) and minimal core services (e.g., a small EC2 instance or RDS standby) in the secondary Region, which can be scaled up to full production within the RTO of under 2 hours. The RPO of 15 minutes is achievable by using synchronous or near-synchronous replication (e.g., Amazon RDS Multi-AZ cross-Region or DynamoDB global tables) to keep data loss minimal. This approach avoids the cost of a full production stack while meeting the recovery objectives.

Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.

Answer analysis

Option-by-option breakdown

For each option: why learners choose it and why it is or isn't the right answer here.

  • Pilot light with critical data and minimal services pre-staged in the secondary Region.

    Why this is correct

    Correct because pilot light keeps a small but ready foundation in the recovery Region, which lowers cost while still allowing much faster recovery than restoring everything from scratch. It is a common fit when the business can accept a short recovery window and controlled failover steps.

    Clue confirmation

    The clue word "best" in the question point toward this answer.

    Related concept

    Read the scenario before looking for a memorised answer.

  • Warm standby with a scaled-down but running environment in the secondary Region.

    Why this is correct

    Correct because warm standby provides faster recovery than pilot light by keeping the secondary environment running at reduced scale. It can meet a moderate RTO while still costing less than fully active production in both Regions.

    Clue confirmation

    The clue word "best" in the question point toward this answer.

    Related concept

    Read the scenario before looking for a memorised answer.

  • Active-active deployment with full production capacity in both Regions.

    Why it's wrong here

    Incorrect because active-active can meet very aggressive recovery goals, but it is usually the most expensive option. The scenario explicitly says the company cannot afford to run full production in both Regions all the time.

  • Backup-and-restore only, with no pre-provisioned resources in the secondary Region.

    Why it's wrong here

    Incorrect because restore-from-backup approaches are typically slower to recover and often struggle to meet a two-hour RTO, depending on data size. They are cheaper, but the recovery objective in this scenario is tighter than pure backup-and-restore usually supports.

  • Single-Region deployment with Multi-AZ only, because that already covers disaster recovery.

    Why it's wrong here

    Incorrect because Multi-AZ protects against Availability Zone failure inside one Region, not a regional disaster. The requirement explicitly calls for two Regions, so a single-Region design does not satisfy it.

Common exam traps

Common exam trap: answer the scenario, not the keyword

The trap here is that candidates often confuse warm standby with active-active, assuming any running environment in the secondary Region must be at full capacity, but warm standby allows a scaled-down environment that can be scaled up within the RTO, meeting cost constraints.

Trap categories for this question

  • Scenario analysis trap

    Incorrect because active-active can meet very aggressive recovery goals, but it is usually the most expensive option. The scenario explicitly says the company cannot afford to run full production in both Regions all the time.

Detailed technical explanation

How to think about this question

In a pilot light setup, the secondary Region typically runs a minimal stack (e.g., a single t3.nano EC2 instance for DNS or health checks) and replicates critical data via Amazon RDS cross-Region read replicas or DynamoDB global tables, which can achieve sub-15-minute RPOs. Warm standby goes further by running a scaled-down but fully functional environment (e.g., smaller EC2 instances and a reduced-capacity Aurora cluster) that can be scaled up via Auto Scaling or manual intervention, often meeting RTOs under 2 hours without the cost of full active-active. Both strategies leverage AWS services like Route 53 health checks and failover routing to automate traffic redirection during a disaster.

KKey Concepts to Remember

  • Read the scenario before looking for a memorised answer.
  • Find the constraint that changes the correct option.
  • Eliminate answers that are true in general but not in this case.

TExam Day Tips

  • Watch for words such as best, first, most likely and least administrative effort.
  • Review why wrong options are wrong, not only why the correct option is correct.

Key takeaway

Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.

Real-world example

How this comes up in practice

A startup's cloud architect reviews their monthly bill and notices costs are higher than expected for a long-running batch job. Switching from on-demand instances to Reserved Instances — or using Spot/Preemptible VMs — can reduce compute costs by up to 72 %. Questions like this test whether you understand the tradeoffs between commitment, flexibility, and cost across cloud pricing models.

Visual reference

Client Server SYN (seq=100) SYN-ACK (seq=200, ack=101) ACK (ack=201) Connection established — data transfer begins

What to study next

Got this wrong? Here's your next step.

Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.

Related practice questions

Related SAA-C03 practice-question pages

Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.

Practice this exam

Start a free SAA-C03 practice session

Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.

FAQ

Questions learners often ask

What does this SAA-C03 question test?

Design Resilient Architectures — This question tests Design Resilient Architectures — Read the scenario before looking for a memorised answer..

What is the correct answer to this question?

The correct answer is: Pilot light with critical data and minimal services pre-staged in the secondary Region. — A pilot light strategy is correct because it pre-stages only critical data (e.g., database replication) and minimal core services (e.g., a small EC2 instance or RDS standby) in the secondary Region, which can be scaled up to full production within the RTO of under 2 hours. The RPO of 15 minutes is achievable by using synchronous or near-synchronous replication (e.g., Amazon RDS Multi-AZ cross-Region or DynamoDB global tables) to keep data loss minimal. This approach avoids the cost of a full production stack while meeting the recovery objectives.

What should I do if I get this SAA-C03 question wrong?

Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.

Are there clue words in this question I should notice?

Yes — watch for: "best". Signals that multiple options may be partially correct. Choose the option that most directly solves the exact problem described, not the one that sounds most complete.

What is the key concept behind this question?

Read the scenario before looking for a memorised answer.

About these practice questions

Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →

How Courseiva writes practice questions · Editorial policy

Keep practising

More SAA-C03 practice questions

Last reviewed: Jun 11, 2026

Question Discussion

Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.

Loading comments…

Sign in to join the discussion.

This SAA-C03 practice question is part of Courseiva's free Amazon Web Services certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the SAA-C03 exam.