- A
The Fargate task is in a private subnet without a NAT gateway or VPC endpoint
Fargate tasks need internet access or VPC endpoints to pull images from ECR.
- B
The task execution role does not have sufficient permissions
Why wrong: The policy includes necessary permissions.
- C
The ECS service is not configured with Auto Scaling
Why wrong: Auto Scaling is unrelated to image pulling.
- D
The ECR repository is not in the same region as the ECS cluster
Why wrong: Cross-region pulls are possible but require additional permissions.
Question 403 of 1,750
DOP-C02 Incident and Event Response Practice Question
This DOP-C02 practice question tests your understanding of incident and event response. The scenario asks you to isolate a root cause — eliminate options that address a different problem before choosing. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
An application running on Amazon ECS Fargate is experiencing intermittent 'CannotPullContainerError' errors. The task definition references a Docker image in a private Amazon ECR repository. The task execution role has the 'AmazonECSTaskExecutionRolePolicy' policy attached. What is the most likely cause?
Clue words in this question
Noticing these words before you look at the options changes how you read each choice.
Clue:
"most likely"Why it matters: Probability qualifier — the question wants the most probable cause or outcome, not a guaranteed one. Eliminate low-probability options.
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
The Fargate task is in a private subnet without a NAT gateway or VPC endpoint
The 'CannotPullContainerError' occurs when the ECS task cannot retrieve the container image from ECR. Since the task execution role has the 'AmazonECSTaskExecutionRolePolicy' attached, which includes the necessary permissions (ecr:GetAuthorizationToken, ecr:BatchCheckLayerAvailability, ecr:BatchGetImage, ecr:GetDownloadUrlForLayer), the issue is not permissions. The most likely cause is that the Fargate task is running in a private subnet that lacks a route to the internet (via NAT gateway) or a VPC endpoint for ECR. Without either, the task cannot reach the ECR API to pull the image. Option A is correct. Option B is wrong because the policy provides sufficient permissions. Option C is irrelevant; Auto Scaling does not affect image pulling. Option D is less likely because ECR repositories are typically in the same region, and cross-region pulls would still be possible with proper permissions and networking.
Key principle: Authentication proves identity; authorization controls what that identity can do after login. Both must work for full privileged access.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
The Fargate task is in a private subnet without a NAT gateway or VPC endpoint
Why this is correct
Fargate tasks need internet access or VPC endpoints to pull images from ECR.
Clue confirmation
The clue word "most likely" in the question point toward this answer.
Related concept
Authentication checks who the user is.
- ✗
The task execution role does not have sufficient permissions
Why it's wrong here
The policy includes necessary permissions.
- ✗
The ECS service is not configured with Auto Scaling
Why it's wrong here
Auto Scaling is unrelated to image pulling.
- ✗
The ECR repository is not in the same region as the ECS cluster
Why it's wrong here
Cross-region pulls are possible but require additional permissions.
Common exam traps
Common exam trap: authentication is not authorization
Logging in proves the user can authenticate. It does not automatically mean the user is allowed to enter privileged or configuration mode. Watch for AAA authorization, privilege level and command authorization details.
Detailed technical explanation
How to think about this question
This kind of question is testing the difference between identity and permission. A user may successfully log in to a router because authentication is working, but still fail to enter configuration mode because authorization is missing, misconfigured or mapped to a lower privilege level.
KKey Concepts to Remember
- Authentication checks who the user is.
- Authorization controls what the user is allowed to do after login.
- Privilege levels affect access to EXEC and configuration commands.
- AAA, TACACS+ and RADIUS can separate login success from command access.
TExam Day Tips
- Do not assume successful login means full administrative access.
- Look for words such as cannot enter configuration mode, privilege level, authorization or command access.
- Separate login problems from permission problems before choosing the answer.
Key takeaway
Authentication proves identity; authorization controls what that identity can do after login. Both must work for full privileged access.
Real-world example
How this comes up in practice
A company's IT admin needs to give a contractor read-only access to production logs without sharing account credentials. Using role-based access control (RBAC) and temporary scoped permissions — not a permanent shared password — is the correct pattern. Questions like this test whether you can apply least-privilege access across cloud identity services.
Visual reference
Quick reference
OSI Model Reference
| Layer | Name | PDU | Key Protocols / Devices |
|---|---|---|---|
| 7 | Application | Data | HTTP, HTTPS, DNS, SMTP, FTP, SSH |
| 6 | Presentation | Data | TLS / SSL, JPEG, ASCII encoding |
| 5 | Session | Data | NetBIOS, RPC, SIP |
| 4 | Transport | Segment / Datagram | TCP, UDP |
| 3 | Network | Packet | IP, ICMP, OSPF — Routers |
| 2 | Data Link | Frame | Ethernet, Wi-Fi, PPP — Switches, Bridges |
| 1 | Physical | Bits | Cables, NICs, Hubs, Repeaters |
What to study next
Got this wrong? Here's your next step.
Review Cisco AAA concepts — authentication, authorization, and accounting. Study privilege levels (0–15), command authorization under TACACS+, and how RADIUS differs. Then practise related DOP-C02 questions on access control and AAA configuration.
- →
Incident and Event Response — study guide chapter
Learn the concepts, then practise the questions
- →
Incident and Event Response practice questions
Targeted practice on this topic area only
- →
All DOP-C02 questions
1,750 questions across all exam domains
- →
AWS Certified DevOps Engineer Professional DOP-C02 study guide
Full concept coverage aligned to exam objectives
- →
DOP-C02 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related DOP-C02 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Configuration Management and IaC practice questions
Practise DOP-C02 questions linked to Configuration Management and IaC.
Resilient Cloud Solutions practice questions
Practise DOP-C02 questions linked to Resilient Cloud Solutions.
Monitoring and Logging practice questions
Practise DOP-C02 questions linked to Monitoring and Logging.
Incident and Event Response practice questions
Practise DOP-C02 questions linked to Incident and Event Response.
Security and Compliance practice questions
Practise DOP-C02 questions linked to Security and Compliance.
SDLC Automation practice questions
Practise DOP-C02 questions linked to SDLC Automation.
DOP-C02 fundamentals practice questions
Practise DOP-C02 questions linked to DOP-C02 fundamentals.
DOP-C02 scenario practice questions
Practise DOP-C02 questions linked to DOP-C02 scenario.
DOP-C02 troubleshooting practice questions
Practise DOP-C02 questions linked to DOP-C02 troubleshooting.
Practice this exam
Start a free DOP-C02 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this DOP-C02 question test?
Incident and Event Response — This question tests Incident and Event Response — Authentication checks who the user is..
What is the correct answer to this question?
The correct answer is: The Fargate task is in a private subnet without a NAT gateway or VPC endpoint — The 'CannotPullContainerError' occurs when the ECS task cannot retrieve the container image from ECR. Since the task execution role has the 'AmazonECSTaskExecutionRolePolicy' attached, which includes the necessary permissions (ecr:GetAuthorizationToken, ecr:BatchCheckLayerAvailability, ecr:BatchGetImage, ecr:GetDownloadUrlForLayer), the issue is not permissions. The most likely cause is that the Fargate task is running in a private subnet that lacks a route to the internet (via NAT gateway) or a VPC endpoint for ECR. Without either, the task cannot reach the ECR API to pull the image. Option A is correct. Option B is wrong because the policy provides sufficient permissions. Option C is irrelevant; Auto Scaling does not affect image pulling. Option D is less likely because ECR repositories are typically in the same region, and cross-region pulls would still be possible with proper permissions and networking.
What should I do if I get this DOP-C02 question wrong?
Review Cisco AAA concepts — authentication, authorization, and accounting. Study privilege levels (0–15), command authorization under TACACS+, and how RADIUS differs. Then practise related DOP-C02 questions on access control and AAA configuration.
Are there clue words in this question I should notice?
Yes — watch for: "most likely". Probability qualifier — the question wants the most probable cause or outcome, not a guaranteed one. Eliminate low-probability options.
What is the key concept behind this question?
Authentication checks who the user is.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Keep practising
More DOP-C02 practice questions
- A company uses AWS CodePipeline with a multi-branch strategy. A new feature branch triggers a pipeline that runs unit te…
- A development team uses AWS CodeBuild to compile a Java application and run unit tests. The build takes 30 minutes, but…
- A company uses AWS CodePipeline with multiple stages: Source (Amazon S3), Build (AWS CodeBuild), and Deploy (AWS CodeDep…
- A company uses AWS CodeCommit for source control. Developers frequently push large binary files (e.g., compiled JARs) to…
- A company runs a Stateful application on EC2 that requires sticky sessions. They use an ALB with duration-based stickine…
- An organization uses AWS CodePipeline to orchestrate deployments to multiple environments (dev, test, prod). Each enviro…
Last reviewed: Jun 20, 2026
This DOP-C02 practice question is part of Courseiva's free Amazon Web Services certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the DOP-C02 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.