- A
Verify that the VPC subnets have a route to a NAT Gateway or Internet Gateway.
Fargate tasks need outbound internet access to pull images.
- B
Confirm that the task definition's container image exists in ECR.
Why wrong: The image location is specified in the task definition; it should exist.
- C
Check if the task definition has sufficient CPU and memory allocated.
Why wrong: Resource limits affect running tasks, not starting them.
- D
Review the security group rules for outbound traffic.
Why wrong: Outbound traffic is typically allowed by default.
Question 30 of 1,750
DOP-C02 Incident and Event Response Practice Question
This DOP-C02 practice question tests your understanding of incident and event response. The scenario asks you to isolate a root cause — eliminate options that address a different problem before choosing. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A DevOps engineer receives an alert that an Amazon ECS service is failing to start tasks. The service uses the Fargate launch type. The task definition includes a container that requires port 8080. The security group associated with the service allows inbound traffic on port 8080. What should the engineer check NEXT?
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
Verify that the VPC subnets have a route to a NAT Gateway or Internet Gateway.
Option A is correct because Fargate tasks require network connectivity to pull container images from ECR (or Docker Hub) and to send logs to CloudWatch. Without a route to a NAT Gateway (for private subnets) or an Internet Gateway (for public subnets), the task cannot pull the image and fails to start. Option B is incorrect: while the image must exist, the immediate symptom of tasks failing to start when the image is missing would be an 'image not found' error, not a generic failure; the security group already allows inbound traffic on port 8080, but outbound connectivity is the issue. Option C is incorrect: insufficient CPU/memory would cause tasks to enter a 'CPU exhausted' or 'memory exhausted' state, not prevent them from starting entirely. Option D is incorrect: the security group allows inbound traffic, but the issue is about egress connectivity for the task to reach the image registry.
Key principle: Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
Verify that the VPC subnets have a route to a NAT Gateway or Internet Gateway.
Why this is correct
Fargate tasks need outbound internet access to pull images.
Related concept
CIDR notation defines the prefix length.
- ✗
Confirm that the task definition's container image exists in ECR.
Why it's wrong here
The image location is specified in the task definition; it should exist.
- ✗
Check if the task definition has sufficient CPU and memory allocated.
Why it's wrong here
Resource limits affect running tasks, not starting them.
- ✗
Review the security group rules for outbound traffic.
Why it's wrong here
Outbound traffic is typically allowed by default.
Common exam traps
Common exam trap: usable hosts are not the same as total addresses
Subnetting questions often tempt you into counting all addresses. In normal IPv4 subnets, the network and broadcast addresses are not usable host addresses.
Detailed technical explanation
How to think about this question
Subnetting questions test whether you can identify the network, broadcast address, usable range, mask and correct subnet. Slow down enough to calculate the block size correctly.
KKey Concepts to Remember
- CIDR notation defines the prefix length.
- Block size helps identify subnet boundaries.
- Network and broadcast addresses are not usable hosts in normal IPv4 subnets.
- The required host count determines the smallest suitable subnet.
TExam Day Tips
- Write the block size before choosing the subnet.
- Check whether the question asks for hosts, subnets or a specific address range.
- Do not confuse /24, /25, /26 and /27 host counts.
Key takeaway
Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.
Real-world example
How this comes up in practice
A company's IT admin needs to give a contractor read-only access to production logs without sharing account credentials. Using role-based access control (RBAC) and temporary scoped permissions — not a permanent shared password — is the correct pattern. Questions like this test whether you can apply least-privilege access across cloud identity services.
Visual reference
What to study next
Got this wrong? Here's your next step.
Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related DOP-C02 subnetting questions on CIDR, address ranges, and subnet selection.
- →
Incident and Event Response — study guide chapter
Learn the concepts, then practise the questions
- →
Incident and Event Response practice questions
Targeted practice on this topic area only
- →
All DOP-C02 questions
1,750 questions across all exam domains
- →
AWS Certified DevOps Engineer Professional DOP-C02 study guide
Full concept coverage aligned to exam objectives
- →
DOP-C02 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related DOP-C02 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Configuration Management and IaC practice questions
Practise DOP-C02 questions linked to Configuration Management and IaC.
Resilient Cloud Solutions practice questions
Practise DOP-C02 questions linked to Resilient Cloud Solutions.
Monitoring and Logging practice questions
Practise DOP-C02 questions linked to Monitoring and Logging.
Incident and Event Response practice questions
Practise DOP-C02 questions linked to Incident and Event Response.
Security and Compliance practice questions
Practise DOP-C02 questions linked to Security and Compliance.
SDLC Automation practice questions
Practise DOP-C02 questions linked to SDLC Automation.
DOP-C02 fundamentals practice questions
Practise DOP-C02 questions linked to DOP-C02 fundamentals.
DOP-C02 scenario practice questions
Practise DOP-C02 questions linked to DOP-C02 scenario.
DOP-C02 troubleshooting practice questions
Practise DOP-C02 questions linked to DOP-C02 troubleshooting.
Practice this exam
Start a free DOP-C02 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this DOP-C02 question test?
Incident and Event Response — This question tests Incident and Event Response — CIDR notation defines the prefix length..
What is the correct answer to this question?
The correct answer is: Verify that the VPC subnets have a route to a NAT Gateway or Internet Gateway. — Option A is correct because Fargate tasks require network connectivity to pull container images from ECR (or Docker Hub) and to send logs to CloudWatch. Without a route to a NAT Gateway (for private subnets) or an Internet Gateway (for public subnets), the task cannot pull the image and fails to start. Option B is incorrect: while the image must exist, the immediate symptom of tasks failing to start when the image is missing would be an 'image not found' error, not a generic failure; the security group already allows inbound traffic on port 8080, but outbound connectivity is the issue. Option C is incorrect: insufficient CPU/memory would cause tasks to enter a 'CPU exhausted' or 'memory exhausted' state, not prevent them from starting entirely. Option D is incorrect: the security group allows inbound traffic, but the issue is about egress connectivity for the task to reach the image registry.
What should I do if I get this DOP-C02 question wrong?
Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related DOP-C02 subnetting questions on CIDR, address ranges, and subnet selection.
What is the key concept behind this question?
CIDR notation defines the prefix length.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Keep practising
More DOP-C02 practice questions
- A company uses AWS CodePipeline with a multi-branch strategy. A new feature branch triggers a pipeline that runs unit te…
- A development team uses AWS CodeBuild to compile a Java application and run unit tests. The build takes 30 minutes, but…
- A company uses AWS CodePipeline with multiple stages: Source (Amazon S3), Build (AWS CodeBuild), and Deploy (AWS CodeDep…
- A company uses AWS CodeCommit for source control. Developers frequently push large binary files (e.g., compiled JARs) to…
- A company runs a Stateful application on EC2 that requires sticky sessions. They use an ALB with duration-based stickine…
- An organization uses AWS CodePipeline to orchestrate deployments to multiple environments (dev, test, prod). Each enviro…
Last reviewed: Jun 20, 2026
This DOP-C02 practice question is part of Courseiva's free Amazon Web Services certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the DOP-C02 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.