- A
Add a step in the CodeBuild buildspec that runs 'aws ecs register-task-definition --cli-input-json file://taskdef.json --no-cli-pager --dry-run' to validate the task definition.
The --dry-run flag validates the input without actually registering the task definition.
- B
Add a step in the CodeBuild buildspec that runs 'aws ecs update-service --service my-service --task-definition <task-def-arn>' to see if the service accepts the task definition.
Why wrong: This would update the service, potentially causing a deployment failure.
- C
Add a step in the CodeBuild buildspec that runs 'aws ecs run-task --task-definition <task-def-arn> --count 1' to test the task definition.
Why wrong: This would actually run a task, which could incur costs and may still fail due to missing parameters.
- D
Add a step in the CodeBuild buildspec that runs 'aws ecs describe-task-definition --task-definition <task-def-arn>' to check if the task definition exists.
Why wrong: This command only retrieves an existing task definition; it does not validate a new one.
Quick Answer
The answer is to add a step in the CodeBuild buildspec that runs `aws ecs register-task-definition --cli-input-json file://taskdef.json --no-cli-pager --dry-run` to validate the ECS task definition before deployment. This approach is the most efficient because the `--dry-run` flag performs a full validation of the task definition—including syntax checks and verification of referenced Parameter Store parameters—without actually registering the definition or incurring any state changes. On the AWS Certified Developer Associate DVA-C02 exam, this scenario tests your understanding of how to prevent deployment failures by catching missing environment variable references early in the pipeline, a common trap where developers might mistakenly use `describe-task-definition` (which only reads existing definitions) or `run-task` (which attempts execution and can incur costs). The key insight is that `register-task-definition` with `--dry-run` acts as a pre-flight check, making it the ideal validation step in a CI/CD workflow. Memory tip: think “Dry run before you fly run”—validate with `--dry-run` to avoid a crash.
DVA-C02 Deployment Practice Question
This DVA-C02 practice question tests your understanding of deployment. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A company is deploying a containerized application on Amazon ECS using Fargate launch type. The application consists of multiple microservices, each deployed as a separate ECS service. The company uses AWS CodePipeline to automate deployments. The pipeline has a Source stage (CodeCommit), a Build stage (CodeBuild), and a Deploy stage (ECS). Recently, a deployment failed because the new task definition referenced an environment variable that was not available in the Parameter Store. The developer wants to prevent such failures in the future by validating the task definition before deployment. The developer has access to the AWS CLI and the AWS SDKs. The pipeline is configured to use CodeBuild for the build stage. What is the MOST efficient way to validate the task definition before deployment?
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Add a step in the CodeBuild buildspec that runs 'aws ecs register-task-definition --cli-input-json file://taskdef.json --no-cli-pager --dry-run' to validate the task definition.
Option B is correct because using the 'aws ecs register-task-definition --cli-input-json' command with the '--no-cli-pager' and '--dry-run' flags will validate the task definition without actually registering it. This command checks for syntax errors and missing references, including Parameter Store parameters. Option A is incorrect because the 'aws ecs describe-task-definition' command only retrieves existing task definitions, not validates new ones. Option C is incorrect because the 'aws ecs run-task' command will actually try to run the task, which could incur costs and may fail at runtime. Option D is incorrect because the 'aws ecs update-service' command updates a service, not validates a task definition.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
Add a step in the CodeBuild buildspec that runs 'aws ecs register-task-definition --cli-input-json file://taskdef.json --no-cli-pager --dry-run' to validate the task definition.
Why this is correct
The --dry-run flag validates the input without actually registering the task definition.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
Add a step in the CodeBuild buildspec that runs 'aws ecs update-service --service my-service --task-definition <task-def-arn>' to see if the service accepts the task definition.
Why it's wrong here
This would update the service, potentially causing a deployment failure.
- ✗
Add a step in the CodeBuild buildspec that runs 'aws ecs run-task --task-definition <task-def-arn> --count 1' to test the task definition.
Why it's wrong here
This would actually run a task, which could incur costs and may still fail due to missing parameters.
- ✗
Add a step in the CodeBuild buildspec that runs 'aws ecs describe-task-definition --task-definition <task-def-arn>' to check if the task definition exists.
Why it's wrong here
This command only retrieves an existing task definition; it does not validate a new one.
Common exam traps
Common exam trap: answer the scenario, not the keyword
Many certification questions include familiar terms but test a specific constraint. Read the exact wording before choosing an answer that is generally true but wrong for this case.
Trap categories for this question
Command / output trap
This command only retrieves an existing task definition; it does not validate a new one.
Detailed technical explanation
How to think about this question
This question should be treated as a scenario, not a definition check. Identify the problem, the constraint and the best action. Then compare each option against those facts.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
- Use explanations to understand the rule behind the answer.
TExam Day Tips
- Underline the problem statement mentally.
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A startup's cloud architect reviews their monthly bill and notices costs are higher than expected for a long-running batch job. Switching from on-demand instances to Reserved Instances — or using Spot/Preemptible VMs — can reduce compute costs by up to 72 %. Questions like this test whether you understand the tradeoffs between commitment, flexibility, and cost across cloud pricing models.
What to study next
Got this wrong? Here's your next step.
Identify which DVA-C02 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
- →
Deployment — study guide chapter
Learn the concepts, then practise the questions
- →
Deployment practice questions
Targeted practice on this topic area only
- →
All DVA-C02 questions
1,616 questions across all exam domains
- →
AWS Certified Developer Associate DVA-C02 study guide
Full concept coverage aligned to exam objectives
- →
DVA-C02 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related DVA-C02 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Development with AWS Services practice questions
Practise DVA-C02 questions linked to Development with AWS Services.
Security practice questions
Practise DVA-C02 questions linked to Security.
Deployment practice questions
Practise DVA-C02 questions linked to Deployment.
Troubleshooting and Optimization practice questions
Practise DVA-C02 questions linked to Troubleshooting and Optimization.
DVA-C02 fundamentals practice questions
Practise DVA-C02 questions linked to DVA-C02 fundamentals.
DVA-C02 scenario practice questions
Practise DVA-C02 questions linked to DVA-C02 scenario.
DVA-C02 troubleshooting practice questions
Practise DVA-C02 questions linked to DVA-C02 troubleshooting.
Practice this exam
Start a free DVA-C02 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this DVA-C02 question test?
Deployment — This question tests Deployment — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: Add a step in the CodeBuild buildspec that runs 'aws ecs register-task-definition --cli-input-json file://taskdef.json --no-cli-pager --dry-run' to validate the task definition. — Option B is correct because using the 'aws ecs register-task-definition --cli-input-json' command with the '--no-cli-pager' and '--dry-run' flags will validate the task definition without actually registering it. This command checks for syntax errors and missing references, including Parameter Store parameters. Option A is incorrect because the 'aws ecs describe-task-definition' command only retrieves existing task definitions, not validates new ones. Option C is incorrect because the 'aws ecs run-task' command will actually try to run the task, which could incur costs and may fail at runtime. Option D is incorrect because the 'aws ecs update-service' command updates a service, not validates a task definition.
What should I do if I get this DVA-C02 question wrong?
Identify which DVA-C02 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Keep practising
More DVA-C02 practice questions
- A developer is troubleshooting an AWS Lambda function that is triggered by an S3 event. The function occasionally fails…
- A developer needs to call AWS APIs from application code running on EC2. Which credential source should the AWS SDK use…
- A developer needs to allow an IAM user in a different AWS account to assume a role in the developer's account. The role…
- A developer needs to grant an IAM role in Account B read-only access to objects in an S3 bucket in Account A. The bucket…
- An API Gateway HTTP API should allow access only to users authenticated by an external OIDC provider. Which authorizer t…
- A developer monitors an AWS Lambda function that processes messages from an Amazon SQS queue. CloudWatch logs show that…
Last reviewed: Jun 20, 2026
This DVA-C02 practice question is part of Courseiva's free Amazon Web Services certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the DVA-C02 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.