- A
Object tags are not returned by head-object; use get-object-tagging instead
Tags are separate from metadata.
- B
The S3 bucket is in a different AWS Region
Why wrong: The command would fail if region mismatch.
- C
The bucket policy blocks reading tags
Why wrong: head-object would fail entirely if blocked.
- D
The object was created without tags because of lifecycle rules
Why wrong: Lifecycle does not remove tags at creation.
DEA-C01 Data Operations and Support Practice Question
This DEA-C01 practice question tests your understanding of data operations and support. Read the scenario carefully and evaluate each option against the stated constraints before committing to an answer. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
Refer to the exhibit. A data engineer runs the command on an object in S3. The engineer expected the object to have a tag 'type=raw' but sees no metadata. What is the likely cause?
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Object tags are not returned by head-object; use get-object-tagging instead
Option A is correct because the head-object command does not return object tags; you must use the get-object-tagging command to retrieve tags. Option B is incorrect because the head-object command succeeds regardless of region, and region does not affect tag visibility. Option C is incorrect because bucket policies can deny access but do not prevent tags from being returned by head-object; they would affect get-object-tagging instead. Option D is incorrect because lifecycle rules do not remove tags from objects; they may transition or expire objects but do not strip metadata.
Key principle: ACLs process entries top to bottom and stop at the first match. Entry order and interface direction matter as much as the permit or deny statement.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
Object tags are not returned by head-object; use get-object-tagging instead
Why this is correct
Tags are separate from metadata.
Related concept
Standard ACLs match source addresses.
- ✗
The S3 bucket is in a different AWS Region
Why it's wrong here
The command would fail if region mismatch.
- ✗
The bucket policy blocks reading tags
Why it's wrong here
head-object would fail entirely if blocked.
- ✗
The object was created without tags because of lifecycle rules
Why it's wrong here
Lifecycle does not remove tags at creation.
Common exam traps
Common exam trap: ACLs stop at the first match
ACLs are processed top to bottom. The first matching entry wins, and an implicit deny usually exists at the end.
Trap categories for this question
Command / output trap
The command would fail if region mismatch.
Detailed technical explanation
How to think about this question
ACL questions test precision: source, destination, protocol, port and direction. A generally correct ACL can still fail if it is applied on the wrong interface or in the wrong direction.
KKey Concepts to Remember
- Standard ACLs match source addresses.
- Extended ACLs can match source, destination, protocol and ports.
- The first matching ACL entry is used.
- There is usually an implicit deny at the end.
TExam Day Tips
- Check inbound versus outbound direction.
- Read the ACL from top to bottom.
- Look for a broader permit or deny above the intended line.
Key takeaway
ACLs process entries top to bottom and stop at the first match. Entry order and interface direction matter as much as the permit or deny statement.
Real-world example
How this comes up in practice
A media company stores terabytes of video archives that are accessed once a year for audit purposes. Moving these objects to a cold storage tier (Azure Archive, S3 Glacier, or Google Nearline) costs a fraction of hot storage. Questions like this test whether you understand storage tiers, access frequency tradeoffs, and retrieval latency requirements.
Quick reference
AWS S3 Storage Class Comparison
| Storage Class | Min Duration | Retrieval | Use Case |
|---|---|---|---|
| S3 Standard | None | Immediate | Frequently accessed data |
| S3 Standard-IA | 30 days | Immediate | Infrequent access, rapid retrieval |
| S3 One Zone-IA | 30 days | Immediate | Non-critical infrequent data |
| S3 Intelligent-Tiering | None | Immediate–hours | Unknown or changing access patterns |
| S3 Glacier Instant | 90 days | Milliseconds | Archive with instant retrieval |
| S3 Glacier Flexible | 90 days | Minutes–hours | Archive, flexible retrieval |
| S3 Glacier Deep Archive | 180 days | Hours | Long-term compliance archive |
What to study next
Got this wrong? Here's your next step.
Review ACL processing order, placement rules (standard near destination, extended near source), and inbound vs outbound direction. Study wildcard masks and implicit deny. Then practise related DEA-C01 ACL questions on filtering logic and placement.
- →
Data Operations and Support — study guide chapter
Learn the concepts, then practise the questions
- →
Data Operations and Support practice questions
Targeted practice on this topic area only
- →
All DEA-C01 questions
1,786 questions across all exam domains
- →
AWS Certified Data Engineer Associate DEA-C01 study guide
Full concept coverage aligned to exam objectives
- →
DEA-C01 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related DEA-C01 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Data Ingestion and Transformation practice questions
Practise DEA-C01 questions linked to Data Ingestion and Transformation.
Data Operations and Support practice questions
Practise DEA-C01 questions linked to Data Operations and Support.
Data Security and Governance practice questions
Practise DEA-C01 questions linked to Data Security and Governance.
Data Store Management practice questions
Practise DEA-C01 questions linked to Data Store Management.
DEA-C01 fundamentals practice questions
Practise DEA-C01 questions linked to DEA-C01 fundamentals.
DEA-C01 scenario practice questions
Practise DEA-C01 questions linked to DEA-C01 scenario.
DEA-C01 troubleshooting practice questions
Practise DEA-C01 questions linked to DEA-C01 troubleshooting.
Practice this exam
Start a free DEA-C01 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this DEA-C01 question test?
Data Operations and Support — This question tests Data Operations and Support — Standard ACLs match source addresses..
What is the correct answer to this question?
The correct answer is: Object tags are not returned by head-object; use get-object-tagging instead — Option A is correct because the head-object command does not return object tags; you must use the get-object-tagging command to retrieve tags. Option B is incorrect because the head-object command succeeds regardless of region, and region does not affect tag visibility. Option C is incorrect because bucket policies can deny access but do not prevent tags from being returned by head-object; they would affect get-object-tagging instead. Option D is incorrect because lifecycle rules do not remove tags from objects; they may transition or expire objects but do not strip metadata.
What should I do if I get this DEA-C01 question wrong?
Review ACL processing order, placement rules (standard near destination, extended near source), and inbound vs outbound direction. Study wildcard masks and implicit deny. Then practise related DEA-C01 ACL questions on filtering logic and placement.
What is the key concept behind this question?
Standard ACLs match source addresses.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Keep practising
More DEA-C01 practice questions
- A data pipeline uses Kinesis Data Firehose to deliver streaming data to an S3 bucket. The data volume spikes occasionall…
- An e-commerce company uses AWS Glue to run ETL jobs that transform clickstream data from Amazon S3. The job reads Parque…
- A data engineering team uses Amazon Kinesis Data Analytics for Apache Flink to process streaming data. They notice that…
- A company uses AWS Glue to process streaming data from Amazon Kinesis Data Streams. The job reads JSON records and write…
- A data engineer applies the above bucket policy to an S3 bucket containing sensitive data. The goal is to allow only enc…
- A company uses AWS Glue to catalog data in Amazon S3. The security team requires that all sensitive data be identified a…
Last reviewed: Jun 20, 2026
This DEA-C01 practice question is part of Courseiva's free Amazon Web Services certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the DEA-C01 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.