- A
Increase the automated snapshot retention period to 35 days.
Current retention is 1 day.
- B
Change the cluster subnet group to a custom one.
Why wrong: Subnet group does not affect retention.
- C
Enable encryption on the cluster.
Why wrong: Encryption is already enabled.
- D
Increase the number of nodes to 6.
Why wrong: Node count does not affect snapshot retention.
DEA-C01 Data Operations and Support Practice Question
This DEA-C01 practice question tests your understanding of data operations and support. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
Refer to the exhibit. A data engineer is reviewing the configuration of an Amazon Redshift cluster. The engineer wants to ensure that the cluster can be restored to a point in time up to 35 days in the past. Based on the exhibit, what change is needed?
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Increase the automated snapshot retention period to 35 days.
Option A is correct. The automated snapshot retention period is currently set to 1 day, which only allows point-in-time recovery within the last day. To restore to a point in time up to 35 days in the past, this retention period must be increased to 35 days. Option B (changing the subnet group) does not affect backup retention. Option C (enabling encryption) is unrelated to snapshot retention; the cluster may already be encrypted or not, but encryption does not extend the retention period. Option D (increasing the number of nodes) also does not affect snapshot retention.
Key principle: Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
Increase the automated snapshot retention period to 35 days.
Why this is correct
Current retention is 1 day.
Related concept
CIDR notation defines the prefix length.
- ✗
Change the cluster subnet group to a custom one.
Why it's wrong here
Subnet group does not affect retention.
- ✗
Enable encryption on the cluster.
Why it's wrong here
Encryption is already enabled.
- ✗
Increase the number of nodes to 6.
Why it's wrong here
Node count does not affect snapshot retention.
Common exam traps
Common exam trap: usable hosts are not the same as total addresses
Subnetting questions often tempt you into counting all addresses. In normal IPv4 subnets, the network and broadcast addresses are not usable host addresses.
Detailed technical explanation
How to think about this question
Subnetting questions test whether you can identify the network, broadcast address, usable range, mask and correct subnet. Slow down enough to calculate the block size correctly.
KKey Concepts to Remember
- CIDR notation defines the prefix length.
- Block size helps identify subnet boundaries.
- Network and broadcast addresses are not usable hosts in normal IPv4 subnets.
- The required host count determines the smallest suitable subnet.
TExam Day Tips
- Write the block size before choosing the subnet.
- Check whether the question asks for hosts, subnets or a specific address range.
- Do not confuse /24, /25, /26 and /27 host counts.
Key takeaway
Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.
Real-world example
How this comes up in practice
A healthcare organisation deploys an application with a public-facing web tier and a private database tier. The database subnet has no public IP and only accepts connections from the web tier's security group. Questions like this test whether you can design cloud network isolation using VNets/VPCs, subnets, and security group rules.
Visual reference
What to study next
Got this wrong? Here's your next step.
Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related DEA-C01 subnetting questions on CIDR, address ranges, and subnet selection.
- →
Data Operations and Support — study guide chapter
Learn the concepts, then practise the questions
- →
Data Operations and Support practice questions
Targeted practice on this topic area only
- →
All DEA-C01 questions
1,786 questions across all exam domains
- →
AWS Certified Data Engineer Associate DEA-C01 study guide
Full concept coverage aligned to exam objectives
- →
DEA-C01 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related DEA-C01 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Data Ingestion and Transformation practice questions
Practise DEA-C01 questions linked to Data Ingestion and Transformation.
Data Operations and Support practice questions
Practise DEA-C01 questions linked to Data Operations and Support.
Data Security and Governance practice questions
Practise DEA-C01 questions linked to Data Security and Governance.
Data Store Management practice questions
Practise DEA-C01 questions linked to Data Store Management.
DEA-C01 fundamentals practice questions
Practise DEA-C01 questions linked to DEA-C01 fundamentals.
DEA-C01 scenario practice questions
Practise DEA-C01 questions linked to DEA-C01 scenario.
DEA-C01 troubleshooting practice questions
Practise DEA-C01 questions linked to DEA-C01 troubleshooting.
Practice this exam
Start a free DEA-C01 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this DEA-C01 question test?
Data Operations and Support — This question tests Data Operations and Support — CIDR notation defines the prefix length..
What is the correct answer to this question?
The correct answer is: Increase the automated snapshot retention period to 35 days. — Option A is correct. The automated snapshot retention period is currently set to 1 day, which only allows point-in-time recovery within the last day. To restore to a point in time up to 35 days in the past, this retention period must be increased to 35 days. Option B (changing the subnet group) does not affect backup retention. Option C (enabling encryption) is unrelated to snapshot retention; the cluster may already be encrypted or not, but encryption does not extend the retention period. Option D (increasing the number of nodes) also does not affect snapshot retention.
What should I do if I get this DEA-C01 question wrong?
Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related DEA-C01 subnetting questions on CIDR, address ranges, and subnet selection.
What is the key concept behind this question?
CIDR notation defines the prefix length.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Keep practising
More DEA-C01 practice questions
- A data pipeline uses Kinesis Data Firehose to deliver streaming data to an S3 bucket. The data volume spikes occasionall…
- An e-commerce company uses AWS Glue to run ETL jobs that transform clickstream data from Amazon S3. The job reads Parque…
- A data engineering team uses Amazon Kinesis Data Analytics for Apache Flink to process streaming data. They notice that…
- A company uses AWS Glue to process streaming data from Amazon Kinesis Data Streams. The job reads JSON records and write…
- A data engineer applies the above bucket policy to an S3 bucket containing sensitive data. The goal is to allow only enc…
- A company uses AWS Glue to catalog data in Amazon S3. The security team requires that all sensitive data be identified a…
Last reviewed: Jun 20, 2026
This DEA-C01 practice question is part of Courseiva's free Amazon Web Services certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the DEA-C01 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.