- A
A DMS source endpoint configured for Oracle.
Connects to the source Oracle database.
- B
An AWS DMS replication instance.
Required to execute the migration tasks.
- C
An AWS Snowball Edge device for initial data transfer.
Why wrong: Snowball is for large offline migrations, not for DMS.
- D
An Amazon S3 bucket for staging the data.
Why wrong: Not required for DMS; DMS transfers directly.
- E
A DMS target endpoint configured for Amazon RDS PostgreSQL.
Connects to the target RDS PostgreSQL database.
Question 193 of 1,786
DEA-C01 Data Ingestion and Transformation Practice Question
This DEA-C01 practice question tests your understanding of data ingestion and transformation. Match the stated requirement to the specific cloud service, access model, or configuration option — many options are valid in isolation but not for this scenario. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A data engineering team is using AWS DMS to migrate a 2 TB Oracle database to Amazon RDS for PostgreSQL. The migration must have minimal downtime and needs to capture ongoing changes after the full load. Which THREE resources are required for this task? (Choose three.)
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
A DMS source endpoint configured for Oracle.
Option A is correct because a source endpoint for Oracle is required to connect to the source Oracle database. Option B is correct because an AWS DMS replication instance is needed to run the migration tasks. Option E is correct because a target endpoint for Amazon RDS PostgreSQL is required. Option C is incorrect because an AWS Snowball Edge device is used for offline data transfer, not for DMS ongoing replication. Option D is incorrect because an Amazon S3 bucket is not required for a direct DMS migration; it would be used only if staging in S3.
Key principle: ACLs process entries top to bottom and stop at the first match. Entry order and interface direction matter as much as the permit or deny statement.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
A DMS source endpoint configured for Oracle.
Why this is correct
Connects to the source Oracle database.
Related concept
Standard ACLs match source addresses.
- ✓
An AWS DMS replication instance.
Why this is correct
Required to execute the migration tasks.
Related concept
Standard ACLs match source addresses.
- ✗
An AWS Snowball Edge device for initial data transfer.
Why it's wrong here
Snowball is for large offline migrations, not for DMS.
- ✗
An Amazon S3 bucket for staging the data.
Why it's wrong here
Not required for DMS; DMS transfers directly.
- ✓
A DMS target endpoint configured for Amazon RDS PostgreSQL.
Why this is correct
Connects to the target RDS PostgreSQL database.
Related concept
Standard ACLs match source addresses.
Common exam traps
Common exam trap: ACLs stop at the first match
ACLs are processed top to bottom. The first matching entry wins, and an implicit deny usually exists at the end.
Detailed technical explanation
How to think about this question
ACL questions test precision: source, destination, protocol, port and direction. A generally correct ACL can still fail if it is applied on the wrong interface or in the wrong direction.
KKey Concepts to Remember
- Standard ACLs match source addresses.
- Extended ACLs can match source, destination, protocol and ports.
- The first matching ACL entry is used.
- There is usually an implicit deny at the end.
TExam Day Tips
- Check inbound versus outbound direction.
- Read the ACL from top to bottom.
- Look for a broader permit or deny above the intended line.
Key takeaway
ACLs process entries top to bottom and stop at the first match. Entry order and interface direction matter as much as the permit or deny statement.
Real-world example
How this comes up in practice
A media company stores terabytes of video archives that are accessed once a year for audit purposes. Moving these objects to a cold storage tier (Azure Archive, S3 Glacier, or Google Nearline) costs a fraction of hot storage. Questions like this test whether you understand storage tiers, access frequency tradeoffs, and retrieval latency requirements.
Quick reference
AWS S3 Storage Class Comparison
| Storage Class | Min Duration | Retrieval | Use Case |
|---|---|---|---|
| S3 Standard | None | Immediate | Frequently accessed data |
| S3 Standard-IA | 30 days | Immediate | Infrequent access, rapid retrieval |
| S3 One Zone-IA | 30 days | Immediate | Non-critical infrequent data |
| S3 Intelligent-Tiering | None | Immediate–hours | Unknown or changing access patterns |
| S3 Glacier Instant | 90 days | Milliseconds | Archive with instant retrieval |
| S3 Glacier Flexible | 90 days | Minutes–hours | Archive, flexible retrieval |
| S3 Glacier Deep Archive | 180 days | Hours | Long-term compliance archive |
What to study next
Got this wrong? Here's your next step.
Review ACL processing order, placement rules (standard near destination, extended near source), and inbound vs outbound direction. Study wildcard masks and implicit deny. Then practise related DEA-C01 ACL questions on filtering logic and placement.
- →
Data Ingestion and Transformation — study guide chapter
Learn the concepts, then practise the questions
- →
Data Ingestion and Transformation practice questions
Targeted practice on this topic area only
- →
All DEA-C01 questions
1,786 questions across all exam domains
- →
AWS Certified Data Engineer Associate DEA-C01 study guide
Full concept coverage aligned to exam objectives
- →
DEA-C01 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related DEA-C01 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Data Ingestion and Transformation practice questions
Practise DEA-C01 questions linked to Data Ingestion and Transformation.
Data Operations and Support practice questions
Practise DEA-C01 questions linked to Data Operations and Support.
Data Security and Governance practice questions
Practise DEA-C01 questions linked to Data Security and Governance.
Data Store Management practice questions
Practise DEA-C01 questions linked to Data Store Management.
DEA-C01 fundamentals practice questions
Practise DEA-C01 questions linked to DEA-C01 fundamentals.
DEA-C01 scenario practice questions
Practise DEA-C01 questions linked to DEA-C01 scenario.
DEA-C01 troubleshooting practice questions
Practise DEA-C01 questions linked to DEA-C01 troubleshooting.
Practice this exam
Start a free DEA-C01 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this DEA-C01 question test?
Data Ingestion and Transformation — This question tests Data Ingestion and Transformation — Standard ACLs match source addresses..
What is the correct answer to this question?
The correct answer is: A DMS source endpoint configured for Oracle. — Option A is correct because a source endpoint for Oracle is required to connect to the source Oracle database. Option B is correct because an AWS DMS replication instance is needed to run the migration tasks. Option E is correct because a target endpoint for Amazon RDS PostgreSQL is required. Option C is incorrect because an AWS Snowball Edge device is used for offline data transfer, not for DMS ongoing replication. Option D is incorrect because an Amazon S3 bucket is not required for a direct DMS migration; it would be used only if staging in S3.
What should I do if I get this DEA-C01 question wrong?
Review ACL processing order, placement rules (standard near destination, extended near source), and inbound vs outbound direction. Study wildcard masks and implicit deny. Then practise related DEA-C01 ACL questions on filtering logic and placement.
What is the key concept behind this question?
Standard ACLs match source addresses.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Keep practising
More DEA-C01 practice questions
- A data pipeline uses Kinesis Data Firehose to deliver streaming data to an S3 bucket. The data volume spikes occasionall…
- An e-commerce company uses AWS Glue to run ETL jobs that transform clickstream data from Amazon S3. The job reads Parque…
- A data engineering team uses Amazon Kinesis Data Analytics for Apache Flink to process streaming data. They notice that…
- A company uses AWS Glue to process streaming data from Amazon Kinesis Data Streams. The job reads JSON records and write…
- A data engineer applies the above bucket policy to an S3 bucket containing sensitive data. The goal is to allow only enc…
- A company uses AWS Glue to catalog data in Amazon S3. The security team requires that all sensitive data be identified a…
Last reviewed: Jun 20, 2026
This DEA-C01 practice question is part of Courseiva's free Amazon Web Services certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the DEA-C01 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.