UiPath-ADPv1 Resource Management — Timed 15 Questions

Question 1

An automation developer is configuring a queue in Orchestrator to process invoices. The queue items have a due date and a priority. The developer wants to ensure that items with the earliest due date are processed first, but also wants to allow manual prioritization for urgent cases. Which queue item property should be used to achieve this?

15 minute time limit — choose an answer to begin.

Accepted Answer

Due Date. The Due Date property allows Orchestrator to sort queue items so that those with the earliest due dates are processed first. When combined with Priority, it provides both automatic ordering by due date and manual override for urgent items. This meets the requirement of processing by earliest due date while allowing manual prioritization.

Answer

Deadline

Answer

Defer Date

Answer

Priority

Question 2

A UiPath automation runs unattended on a machine with limited resources. The process uses a Queue to process transactions. During peak hours, the Queue receives a high volume of items, and the automation must ensure that no items are lost if the robot crashes. Which Queue setting should be configured to prevent items from being lost when a robot fails during processing?

Accepted Answer

Transaction Item Timeout. Transaction Item Timeout is the correct setting because it specifies a duration after which an in-progress item is considered abandoned and is returned to the queue. This is essential in unattended scenarios where a robot might crash; without it, items could remain locked in progress forever. Other settings like retries or unique references do not handle crash recovery.

Answer

Unique Reference

Answer

Auto Retry

Answer

Max # of retries

Question 3

A developer is building a UiPath automation that processes a large queue with high transaction volume. The queue is configured with a unique reference and auto-retry enabled. During testing, several transactions fail due to a transient application error. The developer wants to ensure that failed transactions are automatically retried after a specified delay, but only up to a maximum number of attempts. Which setting in the queue definition should the developer configure to achieve this?

Accepted Answer

Max # of retries. The 'Max # of retries' setting in the queue definition determines how many times a failed transaction will be automatically retried. Combined with the retry interval, it provides controlled retry logic. The other options either do not exist or address different aspects such as uniqueness or timing, not the maximum attempt limit.

Answer

Auto Retry

Answer

Unique Reference

Answer

Retry interval

Question 4

A developer is using UiPath Orchestrator to manage licenses for multiple robots. The company has a limited number of unattended robot licenses. The developer needs to ensure that when a robot is not in use, its license is released so that another robot can use it. Which Orchestrator feature should be configured?

Accepted Answer

License allocation. License allocation in Orchestrator enables the dynamic assignment of licenses to robots. Administrators can configure it to release a license when a robot is not running a job, allowing other robots to use it. This maximizes the utilization of limited unattended licenses, which is essential for cost-effective scaling.

Answer

Queue definitions

Answer

Robot groups

Answer

Machine templates

Question 5

A developer is managing a UiPath Orchestrator environment with multiple robots. The developer needs to ensure that a specific process can only be executed by robots that have the necessary permissions and are part of a specific environment. Which two actions should the developer take? (Choose two.)

Accepted Answer

Assign the robots to the environment that contains the process.. To ensure a process can only be executed by specific robots with necessary permissions, the developer must assign those robots to the environment containing the process. Additionally, the robots' roles must include the Processes permission with View and Execute rights. Environment membership restricts which robots can access the process, while roles define what actions they can perform. Together, these actions enforce the requirement.

Answer

Use machine templates to restrict the process to specific machines and then assign robots to those machines.

Answer

Set the process to 'Run only on specific robots' and select the desired robots.

Answer

Create a new queue and assign it to the robots that should run the process.

Question 6

A developer is designing an unattended automation that will run on a Windows machine and interact with a Java application. The automation must also capture screenshots on failure for debugging. Which two UiPath components or settings are required to ensure the robot can interact with the Java application and capture screenshots? (Choose two.)

Accepted Answer

Install the UiPath Java Bridge. To interact with Java applications, the UiPath Java Bridge must be installed, and the Java extension must be enabled in Studio. These two components ensure that the robot can recognize and manipulate Java UI elements. Screenshot capture on failure is typically configured separately, but the Java interaction requires these specific items.

Answer

Configure the 'Take Screenshot' property on the Java activity

Answer

Set the robot to run in 'Attended' mode

Answer

Enable the 'Capture Screenshots' setting in Orchestrator

Question 7

A developer is configuring a UiPath unattended robot to run on a machine that will be used by multiple robots. The developer needs to ensure that the robot can log in automatically and that the process runs without human intervention. Which two settings must be configured? (Choose two.)

Accepted Answer

Configure the robot's Windows credentials in Orchestrator. To enable an unattended robot to log in automatically, the robot must be configured as 'Unattended' in Orchestrator, and its Windows credentials must be stored. These two settings allow the UiPath Robot service to create a session and execute processes without human interaction. Other settings like environment assignment are necessary for deployment but do not directly control automatic login.

Answer

Assign the robot to an environment with a machine template

Answer

Enable 'Interactive Login' in the robot settings

Answer

Set the robot to 'Attended' in Orchestrator

Question 8

A UiPath automation developer is using a Storage Bucket in Orchestrator to store and retrieve files. The developer needs to ensure that when a file is uploaded to the bucket, it is encrypted at rest and that access is controlled via Orchestrator roles. Which statement accurately describes the security and access control features of Storage Buckets?

Accepted Answer

Storage Buckets automatically encrypt files at rest using Orchestrator's encryption key, and access is governed by Orchestrator roles and permissions.. Storage Buckets provide encryption at rest using Orchestrator's encryption key and enforce access via Orchestrator roles and permissions. This ensures that files are secure both at rest and in terms of who can access them. The other options misattribute encryption or access control to external systems or deny encryption altogether.

Answer

Storage Buckets do not support encryption at rest; they only provide access control through Orchestrator roles.

Answer

Storage Buckets rely on the underlying file system's encryption, and access is managed by Windows Active Directory groups.

Answer

Storage Buckets use Azure Blob Storage encryption exclusively, and access is controlled by shared access signatures (SAS).

Question 9

A developer is creating a UiPath automation that uses an Orchestrator queue. The queue is configured with a unique reference. The developer needs to ensure that if a transaction fails due to a business rule violation, it is not retried automatically. How should the developer handle this in the automation?

Accepted Answer

Set the transaction item's status to 'Failed' and provide a reason, using the Set Transaction Status activity with the 'Business Exception' option.. To prevent automatic retries for business rule violations, the developer should throw a BusinessRuleException, which can be done via the Set Transaction Status activity with the 'Business Exception' option. Orchestrator treats business exceptions as non-retryable, even if auto-retry is enabled. Other options either misclassify the exception or disable retries globally.

Answer

Set the transaction item's status to 'Failed' and provide a reason, using the Set Transaction Status activity with the 'Application Exception' option.

Answer

Use the Retry Transaction activity to explicitly retry the transaction a fixed number of times, then mark it as failed.

Answer

Disable auto-retry on the queue definition, and handle all exceptions as application exceptions.

Question 10

A developer needs to create an automation that uses an Orchestrator asset of type 'Credential'. The asset stores a username and password for a database. The developer wants to retrieve the credential in a secure manner without hardcoding sensitive information. Which activity should the developer use?

Accepted Answer

Get Credential. The Get Credential activity is specifically designed to retrieve credential assets from Orchestrator securely, returning a username and a SecureString password. The Get Asset activity can also retrieve credentials but returns them as plain strings, which is less secure. The other options are non-existent activities.

Answer

Get Secure Credential

Answer

Get Orchestrator Credential

Answer

Get Asset

Question 11

A developer is building a UiPath automation that processes insurance claims. The process must read each claim from a queue, validate the claim data against a web service, and then update the claim status in a legacy system. The validation step occasionally encounters a temporary network timeout, and the developer wants the transaction to be retried automatically up to three times before being marked as failed. The developer has configured the Orchestrator queue with Max Retry = 3. Which activity or configuration should the developer use to ensure that the retry count is respected and the transaction is retried correctly?

Accepted Answer

Set the queue's Max Retry to 3 and use the Set Transaction Status activity with the status Failed in the catch block, allowing Orchestrator to automatically retry the transaction.. Orchestrator queues support automatic retries when a transaction is marked as Failed. The Max Retry property defines how many times a failed item will be retried. The developer must use Set Transaction Status with the Failed status in the catch block to trigger this mechanism. This ensures the item is retried up to the configured limit without creating duplicate queue items or relying on local retry logic.

Answer

Configure the queue's Max Retry to 3 and use the Postpone Transaction Item activity to delay the transaction by a fixed time before retrying.

Answer

Use the Get Transaction Item activity inside a Retry Scope activity with the NumberOfRetries property set to 3.

Answer

Use the Add Queue Item activity to re-add the claim to the queue after a failure, and rely on the queue's Max Retry setting to limit retries.

Question 12

A developer is building an unattended automation that must run on a dedicated Windows machine and interact with a desktop application. The process will be triggered by Orchestrator on a scheduled basis. The developer needs to ensure that the robot can log in to the machine even when no user is logged in interactively. Which UiPath component should be installed and configured on the machine?

Accepted Answer

UiPath Robot in Unattended mode. Unattended robots are specifically designed to execute processes without human intervention, including automatic login to the Windows session. They integrate with Orchestrator to receive jobs and can run on dedicated machines. This makes them the appropriate choice for scheduled unattended automation that interacts with desktop applications.

Answer

UiPath Assistant

Answer

UiPath Studio

Answer

UiPath Robot in Attended mode

Question 13

A developer is building a UiPath automation that processes a large Excel file. The process must run unattended on a virtual machine that has 8 GB of RAM. To optimize memory usage, the developer wants to read only the necessary columns instead of the entire sheet. Which activity should be used to read a specified range of cells from an Excel file?

Accepted Answer

Read Range. Read Range is the correct activity because it reads a specified range from an Excel file and returns a DataTable. By specifying a limited range, the developer can avoid loading unnecessary columns into memory, which is crucial on a VM with only 8 GB of RAM. Other activities either write data or read only single cells, and Excel Application Scope is a container that requires additional activities to read data.

Answer

Write Range

Answer

Excel Application Scope

Answer

Read Cell

Question 14

A developer is building a UiPath automation that must process invoices. The process uses a REFramework and needs to guarantee that each invoice is processed exactly once, even if the robot crashes mid-transaction. The invoices are stored in an Orchestrator Queue named 'Invoices'. What is the correct approach to retrieve and process queue items?

Accepted Answer

Use the 'Get Transaction Item' activity to retrieve a single item with Status 'New', process it, then set its status to 'Successful' using 'Set Transaction Status'.. The correct approach uses Get Transaction Item to atomically retrieve and lock a New queue item, then Set Transaction Status to mark it Successful after processing. This ensures that each item is processed once, and if a crash occurs, the item remains In Progress and can be retried. Other options either fail to lock items, use incorrect activities, or delete items instead of updating status.

Answer

Use the 'Get Transaction Item' activity with the 'Reference' property set to the invoice number, process the item, and then use the 'Update Queue Item' activity to change its status to 'Successful'.

Answer

Use the 'Add Queue Item' activity to add each invoice to the queue, then use 'Get Transaction Item' to process them, and finally delete the queue items after processing.

Answer

Use the 'Get Queue Items' activity to fetch all items with Status 'New', loop through them, and update each item's status to 'Successful' after processing.

Question 15

A developer is creating a UiPath automation that will run on a machine where multiple robots are installed. The developer needs to ensure that the automation can access a shared network drive and write log files. Which account should be used for the robot to have the necessary permissions?

Accepted Answer

A domain user account with appropriate permissions. A domain user account with appropriate permissions allows the robot to access shared network drives and write log files securely. This account can be granted least privilege, reducing security risks. It is the standard practice for unattended robots that require network resource access.

Answer

The built-in SYSTEM account

Answer

The local administrator account

Answer

The current interactive user account