SPLK-1004 Lookups And Alerts — Timed 15 Questions

Question 1

You are performing a lookup with a large CSV file and notice poor performance. Which feature can optimize the lookup performance?

Accepted Answer

Lookup indexing. Lookup indexing builds a separate index (a .tsidx-style sidecar) over the lookup file's key field, so Splunk can perform fast key-based lookups instead of scanning the entire CSV for every event. This is the documented optimization for large lookup tables where performance degrades due to linear scanning. It is configured per lookup definition and dramatically reduces lookup latency on high-volume searches.

Answer

Splitting the lookup file

Answer

Increasing the memory limit

Answer

Compressing the lookup file

Question 2

You are creating a lookup definition that points to a CSV file. Which setting determines if the lookup match is case-sensitive for the input fields?

Accepted Answer

Lookup definition match type. In a lookup definition, the match type setting (for example, 'match_type = WILDCARD' or the case sensitivity option) determines how the lookup matches input fields against the lookup table. Specifically, the lookup definition's advanced settings include a case-sensitive match option that controls whether the match is case-sensitive. This is configured in the lookup definition, not in the CSV file itself.

Answer

Input lookup command

Answer

Automatic lookup field alias

Answer

Lookup table file configuration

Question 3

When using 'lookup' with a time-based lookup table, which parameter allows you to define the range for the match?

Accepted Answer

Time-based lookup definition settings. The 'OUTPUTNEW' and related time-based modifiers are used when defining lookups that account for timestamps.

Answer

time_range

Answer

time_diff

Answer

lookuptime

Question 4

You want to trigger an alert only if a specific event appears more than 10 times in 1 hour. Which trigger condition should you select?

Accepted Answer

Number of events. The 'Number of events' trigger condition in Splunk alerts is used to trigger when the count of events meets a threshold. To trigger if a specific event appears more than 10 times in 1 hour, you would set the trigger condition to 'Number of events' and specify greater than 10.

Answer

Per-result

Answer

Custom

Answer

Number of results

Question 5

You notice that an alert is not triggering. You have checked the search logic and permissions. What is another likely configuration issue?

Accepted Answer

Alert actions are not enabled.. If the search logic and permissions are correct but the alert still does not trigger, a common cause is that the alert actions themselves are disabled in the alert configuration. In Splunk, an alert can be saved with actions (email, webhook, etc.) that are toggled off, meaning the search runs but no notification is sent. Enabling the action is required for the alert to actually notify.

Answer

The app is not visible.

Answer

The owner does not have write access.

Answer

The search is too short.

Question 6

Which type of lookup allows you to dynamically populate a lookup file based on the results of a search?

Accepted Answer

Outputlookup. The outputlookup command writes the results of a search into a lookup file, effectively allowing you to dynamically populate or update a lookup table based on search results. This is the standard mechanism for creating and refreshing lookup files from live data, such as building a CSV of known hosts or updating a KV Store collection.

Answer

External lookup

Answer

KV Store lookup

Answer

Automatic lookup

Question 7

When configuring an automatic lookup, what does the 'lookup_input_fields' parameter define?

Accepted Answer

The search fields that map to lookup keys.. In Splunk automatic lookups, the `lookup_input_fields` parameter (used in `transforms.conf` or the lookup definition) specifies which fields from the incoming search events are matched against the lookup table's key fields. These are the search-time fields that act as the 'keys' for the lookup, so they must correspond to the lookup table's key column(s). For example, if your lookup table maps `user` to `department`, then `lookup_input_fields = user` tells Splunk to use the `user` field from events to find matching rows.

Answer

The maximum number of matches.

Answer

The lookup table file name.

Answer

The fields to be appended to the search.

Question 8

Which THREE actions can be performed when an alert triggers?

Accepted Answer

Run a script. In alerting systems, the actions that can be configured to run when an alert triggers typically include executing a script (B), which allows custom automation or remediation logic to run in response to the alert condition. Sending an email (D) is a standard notification action so that administrators are informed of the triggered alert. Logging the event (E) is also a common action, recording the alert occurrence into a log for auditing, troubleshooting, or correlation purposes. Deleting the index (A) and rebooting the server (C) are not standard built-in alert actions; while a script could theoretically perform such operations, they are not themselves selectable alert-trigger actions in the context of this question.

Answer

Delete the index

Answer

Reboot the server

Question 9

Which THREE factors influence the throttling behavior of an alert?

Accepted Answer

Suppress results by field. Option A (Suppress results by field) is correct because throttling can be scoped to a specific field value, so identical results sharing that field are suppressed rather than generating repeated alerts. Option D (Suppression time period) is correct because the throttle window defines how long alerts are silenced after firing, directly controlling throttling behavior. Option E (Alert action enablement) is correct because whether an alert action is enabled determines if the action executes, which is part of the throttling/notification behavior configuration. Option B (Search index name) does not belong because the index is the data source, not a throttling parameter. Option C (User role) does not belong because permissions affect access, not alert throttling logic.

Answer

Search index name

Answer

User role

Question 10

Which THREE items are required when creating a new Alert action via the UI?

Accepted Answer

Alert action. When creating a new Alert action through the UI, the required fields are the Alert action itself (A), which defines the type of action to be triggered (such as email, script, or webhook); the Alert name (C), which provides a unique identifier for the alert; and the Search string (E), which specifies the search criteria that will trigger the alert. These three elements form the core configuration needed for the alert to function. The Lookup file (B) is optional and only used when the alert action requires enrichment from a lookup table, not a mandatory field. A System admin user (D) is not required to create an alert action, as any user with appropriate permissions can create one, and it is not a configuration field in the alert creation form.

Answer

Lookup file

Answer

System admin user

Question 11

Which TWO of the following scenarios are best suited for using a KV Store lookup?

Accepted Answer

Maintaining a record of alert history. Option A is correct because a KV Store lookup is well suited to maintaining a record of alert history, since it can persistently store and update key-value pairs (e.g., alert ID to status/timestamp) that change over time and need to be retrieved by key. Option B is correct because storing dynamic user preferences fits the KV Store model: each user can be a key with a value holding their preference set, and the data can be updated frequently without requiring a full lookup table rebuild. Option C is not correct because large static lookup tables are better handled by file-based or CSV lookups, which are designed for bulk, read-only reference data. Option D is not correct because mapping IP addresses to hostnames is typically done via DNS or a dedicated lookup (e.g., a hosts file or DNS lookup), not a KV Store. Option E is not correct because archiving index logs is a storage/retention task handled by index lifecycle management, not by a KV Store lookup.

Answer

Large static lookup tables

Answer

Mapping IP addresses to hostnames

Answer

Archiving index logs

Question 12

Which THREE features allow for more precise control over lookup performance?

Accepted Answer

Memory limit configuration. Memory limit configuration (C) is correct because it lets you cap how much memory a lookup is allowed to consume, which directly governs how much of the lookup can be cached and thus how precisely you can tune lookup speed versus resource usage. Field filtering in the lookup definition (D) is correct because restricting which fields are loaded or returned reduces the amount of data processed per lookup, improving lookup precision and performance by avoiding unnecessary field handling. Lookup indexing (E) is correct because creating an index on lookup fields (for example, via lookup definition settings or the index file) enables faster key-based matching, giving more precise control over lookup retrieval performance. Data compression (A) is not correct because compression reduces storage size rather than providing control over lookup performance tuning. User role permissions (B) is not correct because permissions govern access to lookups, not the precision of lookup performance.

Answer

Data compression

Answer

User role permissions

Question 13

You are building a dashboard for the security team. The base search returns events from the `authentication` sourcetype. You need to enrich each event with the user's department and manager, which are stored in a CSV lookup named `user_info.csv`. The lookup has not been defined in Splunk yet. You want the enrichment to happen at search time without modifying the raw events. Which search command should you use?

Accepted Answer

lookup user_info.csv user OUTPUT department, manager. The `lookup` command is designed for search-time enrichment by matching event fields to lookup table fields. It does not alter raw events and supports specifying which fields to output. Using `inputlookup` would return the lookup contents instead of enriching events, while `outputlookup` writes data to the lookup. `join` requires a subsearch and is not intended for lookup files.

Answer

outputlookup user_info.csv

Answer

inputlookup user_info.csv

Answer

join user_info.csv

Question 14

You manage a Splunk deployment where a scheduled alert named "Failed_Logins" is configured to run every 15 minutes. The alert searches for failed login events and appends a lookup field `user_risk` from a CSV lookup named `user_risk_lookup`. The alert has been triggering as expected, but the `user_risk` field is missing from the results. You have verified that the lookup file exists and contains the correct data. You run the search manually and see that the `user_risk` field is populated. What is the most likely reason the field is missing in the alert results?

Accepted Answer

The alert is configured to run with a different user account that lacks permissions to the lookup definition.. Scheduled alerts execute under the permissions of the alert owner or a designated run-as user. If that user does not have access to the lookup definition, the lookup will not be performed, resulting in missing fields. The manual search succeeds because it runs with your permissions, which include lookup access. Thus, the most likely cause is a permissions mismatch.

Answer

The lookup definition is configured with `case_sensitive_match = false`, causing the lookup to fail.

Answer

The alert action is configured to include the `user_risk` field in the output, but the field is not present in the lookup table.

Answer

The alert search does not include the lookup command; it relies on an automatic lookup that is disabled for the alert's app context.

Question 15

A security analyst maintains a CSV lookup file named threat_actors.csv that maps attacker IP addresses to campaign names. The lookup definition uses the default match type and is case-sensitive. A new batch of events contains IP addresses stored in a transformed field called src_ip. The analyst runs a search that includes the lookup command and notices that some events are not enriched. Which lookup command syntax will correctly enrich the events with campaign names from the lookup while preserving all existing fields?

Accepted Answer

| lookup threat_actors ip AS src_ip OUTPUT campaign. The lookup definition maps the field ip, but the events store the IP in src_ip. The AS clause maps src_ip to ip for matching. Using OUTPUT campaign appends the campaign field without overwriting existing fields, which satisfies the requirement to preserve all existing fields. OUTPUTNEW would skip enrichment if campaign already exists, and omitting AS would fail to match the correct field.

Answer

| lookup threat_actors src_ip OUTPUT campaign

Answer

| lookup threat_actors ip AS src_ip OUTPUTNEW campaign AS campaign_name

Answer

| lookup threat_actors ip AS src_ip OUTPUTNEW campaign