20+ practice questions focused on server-hardware-installation-management — one of the most tested topics on the CompTIA Server+ SK0-005 exam. Each question includes a detailed explanation so you learn why the right answer is correct.
Start server-hardware-installation-management PracticeA technician is installing a new server in a data center. To prevent electrostatic discharge (ESD) damage, which of the following should the technician do FIRST?
Explanation: Option C is correct because using an ESD wrist strap connected to a grounded surface is the primary method to prevent ESD damage. Option A is wrong because wearing rubber-soled shoes alone does not provide a path to ground. Option B is wrong because an anti-static mat must be used with a ground connection. Option D is wrong because spraying anti-static spray on the floor is not a standard ESD prevention method and may create a slip hazard.
A server with a RAID 5 array of four disks reports a degraded logical drive. The technician replaces the failed disk and rebuilds the array. After the rebuild completes, the array is still degraded. Which of the following is the most likely cause?
Explanation: Option B is correct because if the replacement disk is of a different speed (e.g., 10k vs 15k), the RAID controller may not accept it or the rebuild may fail, leaving the array degraded. Option A is wrong because missing a partition would not cause the array to remain degraded after rebuild; the array is at a lower level. Option C is wrong because if the firmware were outdated, the controller would likely not recognize the drive at all. Option D is wrong because the disk name in Windows would not affect the RAID status.
A server logged the warning shown in the exhibit. Which of the following should the technician check first?
Explanation: Option C is correct because the warning indicates high processor temperature, which is often caused by a failed or inadequate cooling fan for the CPU. Option A is wrong because the thermal paste would not cause a sudden temperature change; it's a more gradual issue. Option B is wrong while power supply issues can cause overheating, the more direct cause is the CPU fan. Option D is wrong because ambient temperature might be a factor but checking the CPU fan is a more immediate and likely cause.
A technician is replacing a failed hard drive in a hot-swap RAID 5 array. After inserting the new drive, the RAID controller does not automatically rebuild. What should the technician do first?
Explanation: Many RAID controllers require manual initiation of the rebuild process. Rebooting may not trigger it. Replacing with a different model is unnecessary. Checking cabling is less likely since the drive is detected. The technician should use the controller utility to start the rebuild.
A server has four memory slots on two channels (A and B). Currently, DIMM_A1 and DIMM_A2 are populated with 8 GB DDR4-2666 modules each. To maximize performance and capacity, which memory configuration should be added?
Explanation: To achieve dual-channel performance, populate both slots on channel B with identical modules. Adding two 8 GB modules to channel B will enable dual-channel operation and increase capacity to 32 GB symmetrically.
+15 more server-hardware-installation-management questions available
Practice all server-hardware-installation-management questions1. Baseline your knowledge
Start with 10 questions to gauge your current understanding of server-hardware-installation-management. This tells you whether you need a concept refresher or just practice.
2. Review every explanation
For each question — right or wrong — read the full explanation. Understanding why an answer is correct is more valuable than knowing the answer itself.
3. Focus on exam traps
server-hardware-installation-management questions on the SK0-005 frequently use trap wording. Look for subtle differences in answers that test your precision, not just general knowledge.
4. Reach 80% consistently
Do repeated sessions until you score 80%+ three times in a row. Then move to mixed-mode practice to test cross-topic recall under realistic conditions.
The exact number varies per candidate. server-hardware-installation-management is tested as part of the CompTIA Server+ SK0-005 blueprint. Practicing with targeted server-hardware-installation-management questions ensures you can handle any format or difficulty that appears.
Yes. Courseiva provides free SK0-005 practice questions across all exam topics and domains. The platform includes topic-based practice, mock exams, missed-question review, bookmarked questions, and readiness tracking — no account required.
Difficulty is subjective, but server-hardware-installation-management is a high-priority exam concept tested in multiple ways — direct recall, scenario analysis, and command-output interpretation. Consistent practice is the best way to build confidence.
Launch a full server-hardware-installation-management practice session with instant scoring and detailed explanations.
Start server-hardware-installation-management Practice →