NetSec-Analyst Troubleshooting — Timed 25 Questions

Question 1

You are troubleshooting an issue where a site-to-site VPN tunnel is 'up' but no traffic passes. Which tool is best suited to verify if the packets are being encapsulated correctly?

Accepted Answer

show vpn flow. The 'test vpn tunnel' commands (and checking counters) allow you to verify the encapsulation and state of the tunnel interface.

Answer

debug ike global

Answer

show routing route

Answer

ping host from tunnel interface

Question 2

An administrator observes that traffic from the internal network to a specific external server is being dropped. The Traffic Log shows 'drop' with the 'policy-deny' reason. Which tool should the administrator use to identify which security policy is causing this drop?

Accepted Answer

Policy Optimizer. The Policy Optimizer within the Security Policy view is specifically designed to identify which rule matches the traffic flow.

Answer

GlobalProtect Log

Answer

ACC (Application Command Center)

Answer

Packet Capture (pcap)

Question 3

A administrator needs to monitor traffic throughput on a specific sub-interface. Which command provides real-time throughput data?

Accepted Answer

show interface. The 'show session info' or interface statistics commands are used, but 'show interface <interface>' displays real-time throughput metrics.

Answer

show counter interface

Answer

show system resources

Answer

show session all

Question 4

An administrator needs to perform a packet capture to troubleshoot a slow application. Which stage is most appropriate to capture the packet to ensure it is being decrypted?

Accepted Answer

Decrypt stage. The 'decrypt' stage in the packet capture configuration allows the administrator to see the traffic after the firewall has decrypted it.

Answer

Transmit stage

Answer

Firewall stage

Answer

Receive stage

Question 5

A user reports that they cannot access a website, receiving a 'page cannot be displayed' error. Which log type should the administrator check first to see if the traffic is reaching the firewall?

Accepted Answer

Traffic Log. The Traffic log tracks every session that hits the firewall, making it the primary source for connectivity troubleshooting.

Answer

System Log

Answer

URL Filtering Log

Answer

Threat Log

Question 6

If an administrator needs to check the status of a physical interface to see if it is 'up/up', which CLI command is most appropriate?

Accepted Answer

show interface all. The 'show interface' command provides the link state and operational status of physical interfaces.

Answer

show network interface

Answer

show chassis status

Answer

show system status

Question 7

An administrator notices high CPU usage on the management plane. Which command should be used to identify which process is causing the load?

Accepted Answer

show system resources. The 'show system resources' command provides a real-time view of CPU and memory utilization per process.

Answer

debug dataplane packet-diag

Answer

show system statistics

Answer

show system info

Question 8

Traffic is failing the 'Service' check in a security policy. Which CLI tool can be used to confirm which application is being identified for a specific source-destination pair?

Accepted Answer

test security-policy-match. The 'test security-policy-match' tool simulates a policy lookup to determine which rule and application-ID will be matched for a given flow.

Answer

debug dataplane packet-diag

Answer

show session all

Answer

show policy rulebase

Question 9

A administrator is troubleshooting an intermittent application failure. The Traffic log shows the session is aging out due to 'tcp-rst-from-client'. What is the most effective way to determine if the Palo Alto Networks firewall is prematurely closing the session?

Accepted Answer

Monitor 'show counter global filter packet-filter yes' while performing a test. Running a debug flow filter and then observing the output via 'show counter global' helps identify if the firewall is dropping the packet due to internal resource exhaustion or state mismatches.

Answer

Increase the TCP session timeout in the Application override

Answer

View the ACC tab for TCP reset trends

Answer

Disable hardware offload

Question 10

A user reports that they are seeing a 'Server Certificate Warning' when accessing an internal site. Which feature should the administrator investigate?

Accepted Answer

SSL Decryption policy. SSL Forward Proxy decryption issues usually manifest as certificate warnings if the users do not trust the CA that signed the re-signed certificate.

Answer

Security Policy rules

Answer

URL Filtering profile

Answer

App-ID configuration

Question 11

Which log would display an event regarding an administrator logging into the WebUI?

Accepted Answer

System Log. Configuration and administrative access logs are stored in the System log.

Answer

Threat Log

Answer

Config Log

Answer

Traffic Log

Question 12

An administrator has configured a new NAT rule, but traffic is not traversing it. Which column in the NAT logs is the most useful for verifying the NAT translation is occurring?

Accepted Answer

Translated Address. The NAT logs show the 'Source Translated' and 'Destination Translated' addresses, confirming if the rule was applied.

Answer

Application

Answer

Action

Answer

Rule Name

Question 13

A firewall is reporting 'Packet buffer protection' drops. What is the most likely cause of this issue?

Accepted Answer

High volume of traffic exceeding processing capacity. Packet buffer protection is triggered when the firewall receives traffic faster than it can process, often due to a DoS attack or massive traffic spike.

Answer

Hardware failure

Answer

License expiration

Answer

Policy misconfiguration

Question 14

An administrator wants to verify that a specific Threat Prevention profile is applied to a security rule. Where is the most accurate place to check this?

Accepted Answer

Policies > Security > [Rule] > Actions. Within the Security Policy rule definitions, each rule has a dedicated 'Actions' tab where the Profile Group or specific profile is mapped.

Answer

Objects > Security Profiles

Answer

Monitor > Threat

Answer

Device > Setup

Question 15

When troubleshooting a connection, an administrator sees 'aged-out' in the session table. What does this indicate?

Accepted Answer

The session timed out due to inactivity. Aged-out means the session was closed by the firewall because no traffic was seen for that session for a duration exceeding the timeout value.

Answer

The session is currently active

Answer

The session was terminated by a TCP RST packet

Answer

The session was blocked by a threat profile

Question 16

Which CLI command is used to verify the current status of the high availability (HA) pair?

Accepted Answer

show high-availability state. The 'show high-availability state' command provides the current operational status and role of each firewall in the HA pair.

Answer

show ha status

Answer

show system ha

Answer

show system info

Question 17

A DHCP server configured on the firewall is not assigning IPs to clients. Which tool is best to troubleshoot the DHCP relay/server process?

Accepted Answer

debug dhcp. The 'debug dhcp' commands allow the administrator to see the DHCP request/offer process in the logs.

Answer

show network interface

Answer

show system stats

Answer

Packet capture on the interface

Question 18

If you are unable to ping a management interface from a remote subnet, what is the first setting you should check?

Accepted Answer

Management Interface Settings. The 'Management Interface Settings' control which services (like Ping/HTTPS) are allowed on the management port.

Answer

Routing table

Answer

NAT rules

Answer

Security Policy rules

Question 19

An administrator suspects that a specific App-ID is not correctly identifying traffic. Which log column should they examine to confirm the application match?

Accepted Answer

Application. The 'Application' column in the Traffic log explicitly displays what the firewall identified as the application for the session.

Answer