MB-920 Describe Dynamics 365 Supply Chain Management Practice Test 9 — 15 Questions

Question 1

A company uses Dynamics 365 Supply Chain Management with the Asset Management module. They need to create a maintenance plan that generates work orders based on meter readings (e.g., after every 100 operating hours). Which schedule type should they use?

Accepted Answer

Meter. Option B is correct because 'Meter' schedule type uses counter readings to trigger maintenance. Option A is wrong because 'Time' is calendar-based. Option C is wrong because 'Counter' is not a schedule type. Option D is wrong because 'Interval' is not a schedule type; 'Time' uses intervals.

Answer

Counter

Answer

Interval

Answer

Time

Question 2

A company uses Dynamics 365 Supply Chain Management. They want to use the product configurator to allow salespeople to configure a product's options (e.g., color, size) based on rules. What should they create?

Accepted Answer

Constraint-based product configuration model.. Option A is correct because constraint-based product configuration models use constraints and rules to define valid combinations. Option B is wrong because bill of materials (BOM) is for manufacturing components. Option C is wrong because route is for production steps. Option D is wrong because item configuration groups are not a standard concept.

Answer

Bill of materials (BOM) and route.

Answer

Product variant with predefined options.

Answer

Item configuration group.

Question 3

A logistics company uses Dynamics 365 Supply Chain Management to manage transportation. They need to calculate freight charges automatically based on carrier rates and shipment details. Which module should they use?

Accepted Answer

Transportation management. Option B is correct because Transportation management includes rate engines and rate masters for automatic freight calculation. Option A is wrong because Warehouse management is for inbound/outbound operations. Option C is wrong because Procurement and sourcing is for purchasing. Option D is wrong because Inventory management handles stock, not transportation.

Answer

Warehouse management

Answer

Inventory management

Answer

Procurement and sourcing

Question 4

A company uses Dynamics 365 Supply Chain Management with the Process Manufacturing module. They produce a batch of paint and need to adjust the recipe based on the actual concentration of a raw material. What should they use?

Accepted Answer

Potency management.. Option D is correct because the potency management feature allows adjusting quantities based on raw material potency. Option A is wrong because the catch weight feature is for weight-based items. Option B is wrong because the co-product/by-product feature is for multiple outputs. Option C is wrong because the batch order is the production order itself.

Answer

Catch weight functionality.

Answer

Co-product and by-product planning.

Answer

Batch order for the paint.

Question 5

A company uses Dynamics 365 Supply Chain Management. They want to use the vendor collaboration feature to share purchase order information with suppliers. What is a prerequisite?

Accepted Answer

The vendor must be set up as a user with the 'Vendor' role in Microsoft Entra ID.. Option A is correct because vendor collaboration requires users to be set up with the appropriate security role to access the external portal. Option B is wrong because purchase agreements are not required. Option C is wrong because catalog management is separate. Option D is wrong because the procurement catalog is for internal use.

Answer

The vendor must have a procurement category assigned.

Answer

The vendor must be added to the procurement catalog.

Answer

A purchase agreement must be active for the vendor.

Question 6

A company uses Dynamics 365 Supply Chain Management. They are implementing demand-driven material requirements planning (DDMRP). Which TWO elements are part of the DDMRP methodology?

Accepted Answer

Decoupling points. Options A and C are correct because DDMRP uses decoupling points and buffer levels to manage inventory. Option B is wrong because safety stock is a traditional MRP concept. Option D is wrong because reorder point is also traditional. Option E is wrong because lead time is a parameter, not a DDMRP element.

Answer

Lead time offsetting

Answer

Safety stock levels

Answer

Reorder point calculation

Question 7

A company uses Dynamics 365 Supply Chain Management with the Warehouse Management module. They need to configure wave processing to automatically create work for outbound shipments. Which THREE components are required for wave processing?

Accepted Answer

Work template. Options A, C, and D are correct because wave templates, work templates, and location directives are essential for wave processing. Option B is wrong because mobile device menu items are for executing work, not creating it. Option E is wrong because containerization is optional.

Answer

Containerization

Answer

Mobile device menu item

Question 8

A company uses Dynamics 365 Supply Chain Management. They want to use the Landed Cost module to manage the total cost of imported goods. Which TWO cost types can be tracked using Landed Cost?

Accepted Answer

Freight charges. Options A and E are correct because freight and insurance are typical landed costs. Option B is wrong because raw material cost is part of the item cost, not a landed cost. Option C is wrong because manufacturing overhead is not a shipping cost. Option D is wrong because storage fees are not typically included in landed cost.

Answer

Manufacturing overhead

Answer

Storage fees

Answer

Raw material cost

Question 9

You are analyzing a master plan configuration. The company complains that the plan does not consider material availability when scheduling production orders. Which setting in the exhibit is causing this?

Accepted Answer

The 'FiniteMaterial' parameter is set to false.. Option C is correct because 'FiniteMaterial' is set to false, meaning material constraints are ignored. Option A is wrong because the site scope is not related to material constraints. Option B is wrong because operations scheduling is a method that can consider finite capacity. Option D is wrong because finite capacity is set to true, which affects capacity, not material.

Answer

The plan scope is limited to one site.

Answer

The scheduling method is 'Operations scheduling'.

Answer

The 'FiniteCapacity' parameter is set to true.

Question 10

You are reviewing a Power BI report that shows quality order counts by status. The report shows 0 for 'Open' status even though there are open quality orders. What is the most likely reason?

Accepted Answer

The query filters to only orders created in the last 30 days.. Option D is correct because the query filters to the last 30 days, and open orders may have been created earlier. Option A is wrong because the date field exists. Option B is wrong because the status field is present. Option C is wrong because 0 is a valid count.

Answer

The count of open orders is actually zero.

Answer

The 'CreationDate' field does not exist in the QualityOrders table.

Answer

The 'Status' field is not used in the summarize.

Question 11

You are configuring a landed cost voyage. The company wants to ensure that the goods are tracked as in-transit inventory from the time they leave the port of loading. Which element in the exhibit enables this?

Accepted Answer

GoodsInTransitOrder. Option D is correct because the 'GoodsInTransitOrder' field links to a goods-in-transit order, which tracks inventory in transit. Option A is wrong because voyage ID is an identifier. Option B is wrong because ports are locations. Option C is wrong because costs are financial.

Answer

PortOfLoading and PortOfDischarge

Answer

VoyageId

Answer

CostType and Amount

Question 12

A manufacturing company uses Dynamics 365 Supply Chain Management. They need to reduce inventory holding costs by optimizing reorder points. Which feature should they use?

Accepted Answer

Reorder Point Planning. Option D is correct because Reorder Point Planning in Master Planning calculates when to replenish inventory based on historical demand and lead times. Option A is wrong because Vendor Managed Inventory is a supplier collaboration tool, not for internal reorder optimization. Option B is wrong because Demand Forecasting predicts future demand but does not directly set reorder points. Option C is wrong because Inventory Visibility is a real-time inventory service, not a planning tool.

Answer

Vendor Managed Inventory

Answer

Inventory Visibility

Answer

Demand Forecasting

Question 13

A company wants to track products throughout the supply chain using unique identifiers. Which configuration should they enable?

Accepted Answer

Global Inventory Tracking. Option B is correct because Global Inventory Tracking uses license plates and tracking dimensions to trace items across locations. Option A is wrong because Product Variants handle size/color, not tracking. Option C is wrong because Batch Attributes are for quality, not location tracking. Option D is wrong because Catch Weight is for variable-weight items.

Answer

Batch Attributes

Answer

Product Variants

Answer

Catch Weight

Question 14

A distribution company uses Dynamics 365 Supply Chain Management. They notice that transportation costs are high across multiple carriers. Which module should they configure to optimize carrier selection and route planning?

Accepted Answer

Transportation Management. Option C is correct because Transportation Management (TMS) provides tools for carrier rate shopping, route planning, and freight optimization. Option A is wrong because Warehouse Management (WMS) focuses on inbound/outbound operations, not transportation. Option B is wrong because Master Planning handles supply/demand balancing, not carrier selection. Option D is wrong because Asset Management is for equipment maintenance.

Answer

Master Planning

Answer

Warehouse Management

Answer

Asset Management

Question 15

A food manufacturer uses Dynamics 365 Supply Chain Management. They need to ensure that raw materials are only used if they pass quality inspections. Which process should they implement?

Accepted Answer

Quality Management. Option D is correct because Quality Management can enforce that items are quarantined until inspection passes, using quality orders and associations. Option A is wrong because Batch Attributes define characteristics but don't enforce pass/fail. Option B is wrong because Nonconformance Management handles rejections but doesn't prevent use. Option C is wrong because Inventory Statuses can block inventory but require manual setup; Quality Management automates the process.

Answer

Batch Attributes

Answer

Nonconformance Management

Answer

Inventory Statuses