20+ practice questions focused on Ethernet Switching And Spanning Tree — one of the most tested topics on the Juniper Networks Enterprise Routing and Switching, Professional (JNCIP-ENT, JN0-650) (JNCIP-ENT) exam. Each question includes a detailed explanation so you learn why the right answer is correct.
Start Ethernet Switching And Spanning Tree PracticeYou are reviewing the MSTP configuration on an EX4300 switch. You want to assign VLANs 10 through 50 to Multiple Spanning Tree Instance (MSTI) 2. Which syntax under 'protocols mstp' is correct?
Explanation: MSTP instance configuration maps VLAN lists to specific MSTI numbers in Junos.
An enterprise network uses VSTP. During a topology change, network administrators notice excessive flooding of broadcast traffic. Which Juniper configuration statement under 'protocols vstp' prevents unnecessary topology change flooding by restricting TCN propagation?
Explanation: Root guard and BPDU guard protect ports, but for VSTP tuning, bpdu-block-on-edge or restricted role configuration helps. However, setting interface parameters correctly prevents topology shifts. The correct parameter to prevent TCNs on access ports is bpdu-guard or no-root-port.
An administrator implements MSTP (Multiple Spanning Tree Protocol) in a large data center using Juniper switches. Region boundaries must be maintained strictly. Which three parameters must match identically across all switches for them to be considered part of the same MST region?
Explanation: MST region configuration requires identical configuration name, revision number, and VLAN-to-instance mapping table.
An administrator needs to configure a port on an EX series switch to act as a Designated Port in MSTP, forcing it to forward traffic regardless of incoming superior BPDUs from an untrusted switch. Which feature should be enabled on this port?
Explanation: Loop guard or root guard protects ports. Specifically, loop guard prevents alternate or backup ports from becoming designated ports when BPDUs are lost.
You are configuring a Juniper EX Series switch to participate in an existing VSTP domain. You notice that certain VLANs are not participating in VSTP and are dropping traffic. What is the default behavior of VSTP on a newly created VLAN in Junos?
Explanation: By default, when a new VLAN is created on a Juniper switch running VSTP, VSTP is automatically enabled for that VLAN. However, older Junos versions or specific configurations require explicit inclusion. Let's verify: VSTP runs by default on all defined VLANs unless explicitly disabled.
+15 more Ethernet Switching And Spanning Tree questions available
Practice all Ethernet Switching And Spanning Tree questions1. Baseline your knowledge
Start with 10 questions to gauge your current understanding of Ethernet Switching And Spanning Tree. This tells you whether you need a concept refresher or just practice.
2. Review every explanation
For each question — right or wrong — read the full explanation. Understanding why an answer is correct is more valuable than knowing the answer itself.
3. Focus on exam traps
Ethernet Switching And Spanning Tree questions on the JNCIP-ENT frequently use trap wording. Look for subtle differences in answers that test your precision, not just general knowledge.
4. Reach 80% consistently
Do repeated sessions until you score 80%+ three times in a row. Then move to mixed-mode practice to test cross-topic recall under realistic conditions.
The exact number varies per candidate. Ethernet Switching And Spanning Tree is tested as part of the Juniper Networks Enterprise Routing and Switching, Professional (JNCIP-ENT, JN0-650) (JNCIP-ENT) blueprint. Practicing with targeted Ethernet Switching And Spanning Tree questions ensures you can handle any format or difficulty that appears.
Yes. Courseiva provides free JNCIP-ENT practice questions across all exam topics and domains. The platform includes topic-based practice, mock exams, missed-question review, bookmarked questions, and readiness tracking — no account required.
Difficulty is subjective, but Ethernet Switching And Spanning Tree is a high-priority exam concept tested in multiple ways — direct recall, scenario analysis, and command-output interpretation. Consistent practice is the best way to build confidence.
Launch a full Ethernet Switching And Spanning Tree practice session with instant scoring and detailed explanations.
Start Ethernet Switching And Spanning Tree Practice →