AZ-104 Implement and Manage Virtual Networking Practice Test 1 — 15 Questions

Question 1

A network team wants all routers to send log messages to a centralized server at 192.0.2.50. Which command should be added to the router configuration?

Accepted Answer

logging host 192.0.2.50. The correct command is 'logging host 192.0.2.50' because it configures the router to send syslog messages to a centralized syslog server at that IP address. Syslog is the standard protocol (UDP port 514) used by network devices for event logging, and the 'logging host' command directs the router to forward all configured logging levels to the specified server.

Answer

snmp-server host 192.0.2.50

Answer

archive 192.0.2.50

Answer

ntp server 192.0.2.50

Question 2

Which statement best explains the value of enabling both centralized logging and strong access controls on network devices?

Accepted Answer

Access controls reduce unauthorized use, and centralized logging improves visibility and investigation.. Enabling centralized logging (e.g., syslog) on network devices provides a single, tamper-evident repository for all device events, which is critical for post-incident forensic analysis and compliance auditing. Strong access controls (e.g., RBAC, ACLs, 802.1X) directly prevent unauthorized configuration changes and network access, reducing the attack surface. Together, they form a defense-in-depth strategy: access controls block threats, while centralized logging captures evidence of any attempts or breaches for investigation.

Answer

Both features do the exact same job, so using both is redundant.

Answer

Centralized logging removes the need for any authentication.

Answer

Strong access control makes log timestamps irrelevant.

Question 3

Which statement best explains why centralized logging is valuable in security operations?

Accepted Answer

It improves visibility by collecting events from multiple devices in one place for review and investigation.. Centralized logging aggregates security events (e.g., Windows Event Log, syslog, Azure Activity Log) from multiple sources into a single repository like Azure Log Analytics or a SIEM. This consolidation enables security analysts to correlate events across devices, detect patterns indicative of attacks, and perform efficient forensic investigations without needing to access each device individually.

Answer

It guarantees that no unauthorized action can occur.

Answer

It replaces the need for NTP and authentication.

Answer

It automatically assigns IP addresses to monitoring systems.

Question 4

Why is centralized logging especially helpful during incident investigation?

Accepted Answer

It helps investigators analyze related events from multiple devices in one place.. Centralized logging aggregates logs from multiple sources (servers, firewalls, applications) into a single repository, enabling investigators to correlate events across devices during an incident. This eliminates the need to manually access each device's local logs, speeding up root cause analysis and providing a unified timeline of activities.

Answer

It guarantees that no attack can ever succeed.

Answer

It replaces the need for access control.

Answer

It forces all devices to use the same VLAN.

Question 5

Why is centralized logging especially useful during security investigations?

Accepted Answer

It makes related events from multiple devices easier to review and correlate.. Centralized logging aggregates logs from multiple sources (e.g., firewalls, servers, Azure Network Watcher) into a single repository, such as Azure Log Analytics. During security investigations, this enables security analysts to correlate events across devices (e.g., matching a suspicious IP address in firewall logs with authentication failures in domain controller logs) without manually connecting to each device. This correlation is critical for reconstructing attack timelines and identifying lateral movement, which is impossible with siloed logs.

Answer

It guarantees that attacks cannot succeed.

Answer

It replaces the need for authentication and authorization.

Answer

It forces all devices to use the same VLAN.

Question 6

Why is centralized logging valuable during security incident response?

Accepted Answer

It makes related events from many devices easier to collect and correlate.. Centralized logging aggregates logs from multiple sources (e.g., Azure VMs, network security groups, Azure Firewall) into a single repository like Azure Log Analytics or Azure Sentinel. This correlation enables security analysts to identify patterns across devices, such as a chain of events from an initial breach to lateral movement, which is critical for incident response. Without centralization, manually correlating timestamps and log formats from disparate systems would be impractical during an active attack.

Answer

It guarantees that attacks cannot succeed.

Answer

It replaces access control mechanisms.

Answer

It forces all systems to use one VLAN.

Question 7

An operations team wants device-generated log messages collected centrally so engineers can review interface changes, warnings, and errors from one place. Which technology is most directly associated with that goal?

Accepted Answer

Syslog. Syslog (A) is the standard protocol for collecting and centralizing log messages from network devices, servers, and other infrastructure. It allows engineers to forward interface changes, warnings, and errors to a central syslog server, enabling unified review and alerting. This directly matches the goal of centralized device-generated log collection.

Answer

NetFlow

Answer

DHCP relay

Answer

Port security

Question 8

Which two statements accurately describe the value of centralized DHCP in enterprise networks?

Accepted Answer

It can reduce the need to maintain separate DHCP servers in every subnet or site.. Centralized DHCP can simplify operations by keeping address assignment services in a more controlled central location rather than distributing separate servers everywhere. In practical terms, this can reduce administration overhead and make policy changes easier. The tradeoff is that Layer 3 boundaries must then be handled properly so client requests can still reach the server.

This is why DHCP relay becomes important in many campus and branch designs.

Answer

It removes the need for relay across Layer 3 boundaries.

Answer

It eliminates the need for default gateways.

Answer

It is useful only on wireless networks.

Question 9

A network team centralizes DHCP in a data center. Users in a remote branch stop receiving addresses after the branch router is replaced. Which missing configuration on the branch gateway is the strongest suspect?

Accepted Answer

DHCP relay or helper configuration on the client-facing gateway interface. When a DHCP server is centralized in a data center, remote clients rely on the branch gateway to forward their broadcast DHCP requests as unicast to the server. This is achieved by configuring a DHCP relay agent (ip helper-address) on the client-facing interface of the branch router. Without this configuration, DHCP broadcasts are dropped at the router, and clients never receive IP addresses.

Answer

A spanning-tree priority change on the branch switch

Answer

A CAPWAP tunnel from the branch PCs to the data center

Answer

A voice VLAN configuration on the WAN interface

Question 10

A network team wants reliable time, name resolution, centralized logs, and visibility into traffic patterns. Which two services directly match those goals?

Accepted Answer

NTP. NTP (Network Time Protocol) is correct because it provides reliable time synchronization across network devices, which is essential for accurate log timestamps and security protocols. This directly matches the goal of reliable time.

Answer

Syslog

Answer

DHCP

Question 11

A network engineer wants device logs from routers and switches sent to a central server for long-term retention and analysis. Which service should be configured?

Accepted Answer

Syslog. Syslog is the standard protocol for sending device logs (e.g., from routers and switches) to a central server for long-term retention and analysis. It operates over UDP port 514 (or TCP 6514 for reliable delivery) and allows network devices to forward event messages to a syslog collector, which can store, filter, and analyze them. This directly meets the requirement for centralized logging and analysis.

Answer

NTP

Answer

DNS

Answer

NetFlow

Question 12

A switch administrator wants log entries from multiple devices to be collected on one central server for later review. Which service should be configured?

Accepted Answer

Syslog. Syslog is the standard protocol (RFC 5424) used for collecting and centralizing log messages from network devices, servers, and other infrastructure components. By configuring each device to send syslog messages to a central syslog server, the administrator can aggregate logs for unified review, monitoring, and troubleshooting. This directly meets the requirement for centralized log collection.

Answer

DNS

Answer

NTP

Answer

SNMP trap suppression

Question 13

Exhibit: A network engineer wants a subscription-based mechanism to stream operational updates from devices as values change, instead of polling over and over. Which approach best fits?

Accepted Answer

Model-driven telemetry. Model-driven telemetry uses a subscription-based push model to stream operational data from network devices to a collector as values change, eliminating the need for repeated polling. This approach reduces bandwidth and CPU overhead by delivering only relevant updates in real time, which aligns with the requirement for a subscription-based mechanism.

Answer

TFTP backup

Answer

Port security sticky learning

Answer

VTP pruning

Question 14

You deploy a private endpoint for an Azure Storage account. Virtual machines in VNet-App must resolve the storage account name to the private IP address of the endpoint instead of the public endpoint. What should you configure?

Accepted Answer

A private DNS zone linked to VNet-App.. Option B is correct because a private endpoint requires DNS resolution to map the storage account's fully qualified domain name (FQDN) to its private IP address. By creating a private DNS zone (privatelink.blob.core.windows.net) and linking it to VNet-App, Azure automatically creates an A-record pointing to the private endpoint's IP, ensuring VMs resolve the storage account name privately instead of via the public endpoint.

Answer

A network security group on the subnet.

Answer

A public DNS zone for the storage account name.

Answer

A user-defined route table on the subnet.

Question 15

VM-Web01 is connected to Subnet-Web in VNet-Prod. Users on the internet cannot access the website hosted on TCP port 443. You confirm that VM-Web01 has a public IP address and the web service is running. You need to allow inbound HTTPS traffic with the least administrative effort. What should you do?

Accepted Answer

Add an inbound NSG rule allowing TCP 443.. The VM has a public IP and the web service is running, but internet users cannot access it. The most common reason is that the Network Security Group (NSG) associated with the subnet or NIC is blocking inbound traffic. Adding an inbound NSG rule to allow TCP 443 is the least administrative effort to permit HTTPS traffic from the internet.

Answer

Create a user-defined route to the internet.

Answer

Configure VNet peering with another virtual network.

Answer

Create a private endpoint for VM-Web01.