Question 468 of 514
Junos Configuration BasicsmediumDrag & DropObjective-mapped

JNCIA-JUNOS Junos Configuration Basics Practice Question

This JNCIA-JUNOS practice question tests your understanding of junos configuration basics. Examine the command output carefully: the correct answer depends on what the output actually shows, not on general recall alone. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.

Order the steps to configure a BGP peering session in Junos.

Question 1mediumdrag order
Open the full BGP breakdown →
Answer choices are not available in this preview. Open the full question page for the complete review.

Correct answer & explanation

BGP requires an AS number, group configuration, and neighbor definition. Verify with 'show bgp summary'.

Key principle: OSPF neighbour adjacency depends on matching area, hello/dead timers, network type, and authentication — IP reachability alone is not enough.

Common exam traps

Common exam trap: OSPF can fail even when IP connectivity looks correct

OSPF neighbour formation depends on matching areas, timers, network type, authentication and passive-interface behaviour. Do not choose an answer only because the devices can ping.

Detailed technical explanation

How to think about this question

OSPF questions usually test the details that control adjacency and route selection. Read the neighbour state, area, router ID and interface configuration before deciding what is wrong.

KKey Concepts to Remember

  • OSPF neighbours must agree on key parameters.
  • Router ID selection can affect neighbour relationships and LSDB output.
  • OSPF cost influences the preferred path.
  • A route can appear in OSPF information but not become the installed route.

TExam Day Tips

  • Check area mismatch first when OSPF adjacency fails.
  • Review passive interfaces when a network is advertised but no neighbour forms.
  • Use show ip ospf neighbor and show ip route clues carefully.

Key takeaway

OSPF neighbour adjacency depends on matching area, hello/dead timers, network type, and authentication — IP reachability alone is not enough.

Real-world example

How this comes up in practice

A network engineer at a university connects two campus buildings via a fibre link. Both routers run OSPF, but no adjacency forms — even though both routers can ping each other. The engineer finds one router is in area 0 and the other in area 1. OSPF adjacency requires matching area numbers, hello/dead timers, and network type. IP reachability alone is not enough.

What to study next

Got this wrong? Here's your next step.

Review OSPF neighbour requirements — matching area type, hello and dead timers, network type, stub flags, and authentication. Study show ip ospf neighbor states (INIT, 2-WAY, FULL). Then practise related JNCIA-JUNOS OSPF questions on adjacency and route selection.

Related practice questions

Related JNCIA-JUNOS practice-question pages

Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.

Practice this exam

Start a free JNCIA-JUNOS practice session

Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.

FAQ

Questions learners often ask

What does this JNCIA-JUNOS question test?

Junos Configuration Basics — This question tests Junos Configuration Basics — OSPF neighbours must agree on key parameters..

What exam trap should I watch out for?

Common exam trap: OSPF can fail even when IP connectivity looks correct: OSPF neighbour formation depends on matching areas, timers, network type, authentication and passive-interface behaviour. Do not choose an answer only because the devices can ping.

What should I do if I get this JNCIA-JUNOS question wrong?

Review OSPF neighbour requirements — matching area type, hello and dead timers, network type, stub flags, and authentication. Study show ip ospf neighbor states (INIT, 2-WAY, FULL). Then practise related JNCIA-JUNOS OSPF questions on adjacency and route selection.

What is the key concept behind this question?

OSPF neighbours must agree on key parameters.

About these practice questions

Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →

How Courseiva writes practice questions · Editorial policy

Last reviewed: Jun 11, 2026

Question Discussion

Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.

Loading comments…

Sign in to join the discussion.

This JNCIA-JUNOS practice question is part of Courseiva's free Juniper Networks certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the JNCIA-JUNOS exam.