A network engineer is troubleshooting an MPLS L3VPN where CE1 (192.168.1.0/24) cannot reach CE2 (192.168.2.0/24). The PE routers are running OSPF with the CEs. On PE1, the VRF configuration includes route-target import and export 100:100. The show ip vrf detail command on PE1 shows the VRF is active, but the CE1 loopback is not present in the VRF routing table. The show ip route vrf CUSTOMER command on PE1 shows only directly connected interfaces. What is the most likely cause?

Select one: