VCP-DCV Timed Practice Test 4 — 10 Questions

Question 1

A vSphere administrator is planning to configure VMware vSAN. Which TWO requirements must be met for a vSAN cluster?

Accepted Answer

Each host must have at least one SSD and one HDD for capacity.. Option C is correct because vSAN requires at least one SSD (or NVMe) for the cache tier and one HDD (or SSD) for the capacity tier on each host to form a disk group. This hybrid or all-flash configuration is fundamental to vSAN's storage architecture, where the cache tier accelerates writes and reads, while the capacity tier provides persistent storage.

Answer

A dedicated 10 GbE network for vSAN traffic.

Answer

All hosts must have identical CPU models.

Answer

A shared storage array accessible by all hosts.

Question 2

An administrator is troubleshooting a failed attempt to add an ESXi host to a vCenter Server domain. The error message states: 'The host's certificate has been tampered with or is invalid.' What is the most likely cause?

Accepted Answer

The ESXi host's certificate thumbprint does not match the thumbprint stored in vCenter Server.. The error 'The host's certificate has been tampered with or is invalid' occurs when the ESXi host presents a certificate whose thumbprint does not match the thumbprint that vCenter Server has stored for that host. This mismatch can happen if the host's certificate was replaced (e.g., due to a reinstall or manual rotation) without updating the vCenter Server's trusted store. vCenter Server verifies the host's identity by comparing the SHA-1 or SHA-256 thumbprint of the presented certificate against its stored record; a mismatch triggers this specific error.

Answer

The vCenter Server's account lockout policy has been triggered.

Answer

The ESXi host's SSH keys have been rotated.

Answer

The ESXi host's certificate has expired.

Question 3

Which TWO statements are true regarding vSphere Lifecycle Manager (vLCM) clusters? (Choose two.)

Accepted Answer

vLCM can manage vSAN clusters using a single image.. Option A is correct because vLCM can manage vSAN clusters using a single image, which ensures that all hosts in the cluster run the same software version and driver/firmware combinations, including vSAN-specific components. This simplifies lifecycle management by eliminating the need for separate baselines and reduces compatibility issues.

Answer

vLCM only supports clusters with identical hardware.

Answer

vLCM can only remediate hosts that are part of a cluster.

Answer

vLCM requires vCenter Server to be in Enhanced Linked Mode.

Question 4

A company has a vSphere environment with 20 ESXi hosts and 500 VMs. The security team mandates that all administrative access to vCenter Server must be through a single, highly restricted account with multi-factor authentication (MFA). The account must be used for both the vSphere Client and API integrations. Which step should the administrator take?

Accepted Answer

Integrate vCenter Server with an external identity provider (e.g., ADFS, Okta) that supports MFA, and use a service account with MFA for API access.. Option B is correct because integrating vCenter Server with an external identity provider (IdP) such as ADFS or Okta allows the use of a single service account that supports multi-factor authentication (MFA) for both the vSphere Client and API integrations. This approach meets the security mandate by centralizing authentication through an IdP that enforces MFA, while also supporting OAuth 2.0 token-based API access, which is required for modern vSphere API integrations. The built-in administrator account cannot be directly configured with MFA in a way that satisfies both interactive and API access requirements without external integration.

Answer

Configure the built-in administrator account to require smart card authentication.

Answer

Create a new local account and configure it as a member of the Administrators group, then enforce MFA via a third-party tool on the vCenter Server OS.

Answer

Disable the built-in administrator account and create a new local account with the same privileges.

Question 5

Which THREE factors should be considered when sizing a host cluster for a VDI environment with 1000 desktops? (Choose three.)

Accepted Answer

Storage IOPS capacity for boot storms.. Storage IOPS capacity for boot storms is critical because when 1000 desktops boot simultaneously (e.g., at start of shift), they generate a massive burst of read I/O. If the storage array cannot handle the peak IOPS, desktops will experience slow boot times or timeouts. Proper sizing must account for both steady-state IOPS and the boot storm peak, often using flash storage or caching to absorb the load.

Answer

vMotion compatibility between hosts.

Answer

NUMA alignment of virtual desktops.

Question 6

An administrator wants to ensure that VMs running latency-sensitive applications are placed on hosts that minimize CPU scheduling delays. Which DRS setting should be configured?

Accepted Answer

Set DRS migration threshold to the most aggressive setting.. DRS migration threshold controls how aggressively DRS moves VMs to balance load. Setting it to the most aggressive level (1) minimizes CPU scheduling delays by proactively migrating VMs to hosts with lower CPU ready times, ensuring latency-sensitive applications have immediate access to CPU resources without waiting for scheduling cycles.

Answer

Enable vSphere HA with admission control.

Answer

Enable Distributed Power Management (DPM).

Answer

Enable Enhanced vMotion Compatibility (EVC).

Question 7

A vSphere administrator is troubleshooting a VM that is experiencing excessive disk latency. The VM is on a datastore accessed via NFS over a 1GbE network. The host shows high network utilization. Which action should be taken to improve performance?

Accepted Answer

Upgrade the network link to 10GbE or enable multiple NICs with teaming.. The VM is experiencing excessive disk latency due to high network utilization on the 1GbE link. Since NFS storage traffic is entirely network-bound, upgrading to 10GbE or enabling multiple NICs with teaming increases the available bandwidth, reduces congestion, and directly addresses the root cause of the latency. This is the most effective action because the bottleneck is at the network layer, not the storage protocol or VM configuration.

Answer

Enable Storage I/O Control on the datastore.

Answer

Convert the datastore from NFS to VMFS.

Answer

Increase the memory reservation for the VM.

Question 8

A company has a cluster with DRS set to Fully Automated. A VM named VM1 has a reservation of 4 GHz and a limit of 8 GHz on a host with 10 GHz available. The VM is running a batch job that requires as much CPU as possible. The administrator notices that the VM's CPU usage never exceeds 4 GHz. What is the most likely reason?

Accepted Answer

The VM has a CPU limit set to 4 GHz via a resource pool or VM override.. Option C is correct because a CPU limit explicitly caps the maximum CPU usage a VM can consume, regardless of available resources. In this scenario, the VM has a reservation of 4 GHz and a limit of 8 GHz on the host, but the administrator observes usage never exceeding 4 GHz, indicating a more restrictive limit is applied via a resource pool or VM override. This overrides the host-level limit, effectively capping the VM at 4 GHz, which matches the observed behavior.

Answer

The CPU reservation is preventing the VM from using more than the reserved amount.

Answer

The CPU shares are too low, causing the VM to be starved.

Answer

DRS is not migrating the VM to a host with more resources.

Question 9

A company runs a large vSphere environment with multiple clusters using vSAN. The performance team observes that some VMs are experiencing high latency on reads. The vSAN cluster is configured with 5 hosts, each having one cache tier (NVMe) and one capacity tier (SATA SSD). The VMs are all-flash storage policies. What should the administrator check first?

Accepted Answer

Check the vSAN cache hit ratio and verify that the cache tier size is adequate.. High read latency in an all-flash vSAN environment often indicates that the cache tier is being overwhelmed or is undersized. The cache hit ratio directly measures how often read requests are served from the fast NVMe cache versus the slower SATA SSD capacity tier. A low cache hit ratio means the capacity tier is handling too many reads, causing latency. Checking this ratio is the first diagnostic step before making configuration changes.

Answer

Disable deduplication and compression on the vSAN datastore.

Answer

Reconfigure the disk groups to use multiple cache devices.

Answer

Increase the network bandwidth between hosts.

Question 10

A vSphere administrator is planning to upgrade a vSphere 7.0 U2 cluster to vSphere 8.0 U1. The cluster is managed by a vCenter Server 7.0 U2. The administrator wants to use vSphere Lifecycle Manager (vLCM) to manage the upgrade. What must the administrator do first?

Accepted Answer

Upgrade vCenter Server to version 8.0 U1.. vLCM relies on the vCenter Server to orchestrate and push images to ESXi hosts. Since the vCenter Server version must be equal to or higher than the target ESXi version, upgrading vCenter Server to 8.0 U1 first is a prerequisite. Without this, vLCM cannot manage the ESXi 8.0 U1 image because the older vCenter lacks the necessary APIs and compatibility.

Answer

Enable vLCM on the cluster and set the desired image to ESXi 8.0 U1.

Answer

Upgrade one ESXi host to 8.0 U1 manually to test compatibility.

Answer

Create a baseline for ESXi 8.0 U1 in vLCM.