PCNE Configuring network services Practice Test 1 — 15 Questions

Question 1

A company has deployed a Global External Application Load Balancer with Premium Tier and enables Cloud CDN. Users in Europe report high latency, while users in the US have good performance. The backend is a regional NEG in us-west1. What is the most likely cause?

Accepted Answer

The origin server is sending 'Cache-Control: private' headers, preventing Cloud CDN from caching.. Option D is correct because Cloud CDN cannot cache responses that include a 'Cache-Control: private' header. This header instructs intermediate caches (including CDN nodes) not to store the response, forcing all requests to go to the origin server in us-west1. Users in Europe experience high latency because their requests must traverse the long distance to the US origin, while US users benefit from shorter paths. Enabling Cloud CDN alone does not guarantee caching; the origin must also allow caching by omitting 'private' or setting appropriate 'Cache-Control: public' and 'max-age' directives.

Answer

The load balancer is using Premium Tier, which routes to the nearest backend; the backend is only in us-west1.

Answer

Cloud CDN is not enabled on the load balancer.

Answer

The load balancer is using Standard Tier, which does not support global anycast.

Question 2

A company is migrating on-premises DNS to Google Cloud. They have a hybrid network using Cloud VPN and want to resolve on-premises hostnames from Compute Engine instances without custom scripts. Which service should they use?

Accepted Answer

Use Cloud DNS inbound server policy to forward queries to on-premises DNS.. Cloud DNS inbound server policy allows on-premises DNS servers to receive DNS queries from Compute Engine instances by creating a VPC-scoped policy that forwards queries to the IP addresses of on-premises DNS resolvers over Cloud VPN. This enables hybrid name resolution without custom scripts, as the policy automatically handles the forwarding of DNS requests from Google Cloud resources to the on-premises DNS infrastructure.

Answer

Create a forwarding zone in Cloud DNS and associate it with the VPC.

Answer

Enable Private Google Access on the VPC subnet.

Answer

Configure Cloud NAT to forward DNS queries to on-premises DNS servers.

Question 3

A network engineer is configuring a Cloud Router for BGP peering with an on-premises router over a VPN tunnel. The on-premises router uses 169.254.x.x link-local addresses. Which BGP peer IP should the engineer use in the Cloud Router configuration?

Accepted Answer

169.254.0.1. The correct BGP peer IP is 169.254.0.1 because Cloud Router uses the first IP in the 169.254.0.0/16 link-local range for BGP peering over a VPN tunnel. This is required by Google Cloud's implementation, where the on-premises router must use a link-local address from the 169.254.0.0/16 range, and Cloud Router automatically assigns 169.254.0.1 as its own BGP peer IP. The on-premises router typically uses 169.254.0.2 as its BGP peer IP, ensuring a point-to-point link-local BGP session.

Answer

10.0.0.1

Answer

The tunnel's external IP address

Answer

The on-premises router's external IP address

Question 4

A company uses an internal TCP/UDP load balancer to distribute traffic to a backend service. The backend instances are in an unmanaged instance group. Some instances fail health checks and are removed. What happens to existing connections to failed instances?

Accepted Answer

Existing connections are terminated immediately.. When an instance in an unmanaged instance group fails a health check, the internal TCP/UDP load balancer immediately terminates all existing connections to that instance. This is because the load balancer does not support connection draining for unmanaged instance groups; it simply stops forwarding new traffic and drops existing flows to the failed instance. The abrupt termination occurs because the load balancer operates at Layer 4 and has no mechanism to gracefully close TCP connections or wait for application-level cleanup.

Answer

The load balancer drains existing connections before removing the instance.

Answer

Existing connections are seamlessly redirected to healthy instances.

Answer

The load balancer waits for all existing connections to close before removing the instance.

Question 5

A company has a VPC with subnets in us-central1 and europe-west1. They create a Private Service Connect endpoint for a managed service in us-central1. Can Compute Engine instances in europe-west1 access the endpoint?

Accepted Answer

No, because the endpoint is only accessible from the same region.. Private Service Connect (PSC) endpoints are regional resources. An endpoint created in us-central1 is only accessible from Compute Engine instances within the same region (us-central1) of the VPC. Instances in europe-west1 cannot directly reach the endpoint because traffic would need to cross regional boundaries, which PSC does not support for producer endpoints. Option D correctly identifies this regional restriction.

Answer

Yes, if they use a global load balancer in front of the endpoint.

Answer

No, unless the VPC is peered with another VPC that contains the endpoint.

Answer

Yes, because the endpoint is accessible from any region in the VPC.

Question 6

A company is designing a hybrid network using Dedicated Interconnect. They want to configure BGP for load balancing across multiple VLAN attachments. Which TWO statements are correct?

Accepted Answer

You can configure the Cloud Router to advertise the same IP prefixes over both VLAN attachments.. Option B is correct because a Cloud Router can advertise the same IP prefixes over multiple VLAN attachments to enable load balancing. This allows Google Cloud to use ECMP (Equal-Cost Multi-Path) routing to distribute outbound traffic across the two VLAN attachments, as long as the BGP attributes (e.g., AS path length, MED) are equal.

Answer

You must create a separate Cloud Router for each VLAN attachment.

Answer

You should use BGP MED to load balance outbound traffic from Google Cloud.

Answer

Load balancing across VLAN attachments requires a single BGP session.

Question 7

A company is using Cloud NAT to allow private instances to access the internet. They notice that some instances are not able to reach certain external services. Which THREE steps should they take to troubleshoot?

Accepted Answer

Check if the external service is blocking the Cloud NAT IP addresses.. Option A is correct because Cloud NAT uses a set of public IP addresses for outbound traffic. If the external service has firewall rules or access control lists that block these specific IP addresses, the instances will be unable to reach it. Checking for IP-based blocking is a standard first step in troubleshooting connectivity issues through a NAT gateway.

Answer

Ensure that the VPC has a default route to the internet gateway.

Answer

Check the DNS resolution for the external service.

Question 8

A company uses Cloud NAT to allow private instances to reach the internet. They notice that egress traffic from Compute Engine VMs is intermittently failing. The VMs are in us-central1-a and use the default VPC network. Cloud NAT is configured with a single NAT IP address. What is the most likely cause?

Accepted Answer

Port exhaustion due to insufficient NAT IP addresses. Cloud NAT uses source network address translation (SNAT) to map private VM IPs to a public NAT IP. With only a single NAT IP address, the available port range (typically 64,512 ephemeral ports per NAT IP per VM) can be exhausted under high egress traffic, causing intermittent failures. This is the most likely cause given the symptom of intermittent failures and the single IP configuration.

Answer

Missing default route to Internet gateway

Answer

Cloud NAT not configured in the correct region

Answer

Firewall rule blocking egress traffic from VM

Question 9

A large enterprise is migrating to Google Cloud and needs to establish connectivity between on-premises and VPCs in two different regions (us-east1 and europe-west1). They have a single Partner Interconnect connection at a co-location facility in New York. They want to use the same interconnect for both regions. Which configuration should they use?

Accepted Answer

Create two VLAN attachments, one for each region, over the same interconnect. A is correct because a single Partner Interconnect connection can support multiple VLAN attachments, each associated with a different region. By creating two VLAN attachments over the same interconnect—one for us-east1 and one for europe-west1—the enterprise can route traffic from the on-premises network to both VPCs using the same physical link, leveraging Google Cloud's support for multiple VLAN attachments per interconnect.

Answer

Create one VLAN attachment and attach it to both VPCs

Answer

Use HA VPN over the interconnect to connect both regions

Answer

Create two Cloud VPN tunnels from on-prem to each VPC

Question 10

A company is using Cloud DNS for private zone resolution within their VPC. They have a private zone for 'example.internal' and have attached it to the VPC. When they create a new Compute Engine VM and try to resolve 'myapp.example.internal', it fails. What is the most likely cause?

Accepted Answer

The record 'myapp.example.internal' does not exist in the zone. Option D is correct because the most likely cause of a resolution failure for a specific record is that the record does not exist in the private zone. The question states the zone is attached to the VPC, so the zone itself is accessible; the failure is specific to the record name. Cloud DNS will return an NXDOMAIN response if the record is not defined, even if the zone is properly configured.

Answer

The private zone is not attached to the VPC

Answer

The VM's /etc/resolv.conf does not point to Cloud DNS

Answer

Firewall rule blocking DNS traffic (UDP 53) to the metadata server

Question 11

You have a Cloud Router with the configuration shown. The on-premises network (ASN 65002) is not receiving any routes from Google Cloud. What is the most likely cause?

Accepted Answer

The router is in custom advertise mode but does not advertise the VPC subnets. When a Cloud Router is configured in custom advertise mode, it only advertises the routes explicitly specified in the custom advertisement list. If the VPC subnets are not included in that list, the on-premises network will not receive any routes from Google Cloud, even if the BGP session is established. This is the most likely cause because the question states the on-premises network is not receiving any routes, which aligns with a missing custom advertisement rather than a session or timer issue.

Answer

The BGP keepalive interval is set too low

Answer

The BGP session is not established

Answer

The on-premises subnet 10.0.1.0/24 is not advertised

Question 12

A company has a VPC with subnets in us-east1 and europe-west1. They have deployed a global external HTTP(S) load balancer with backend services in both regions. Users in Europe report high latency. What is the most likely cause?

Accepted Answer

Session affinity set to CLIENT_IP, causing sticky sessions to a distant backend. Option D is correct because CLIENT_IP session affinity causes the load balancer to hash the client's IP address to a specific backend instance. If a user in Europe is hashed to a backend in us-east1, all their requests will be forwarded to that distant region, resulting in high latency. This occurs even though a healthy backend exists in europe-west1, because the affinity overrides the load balancer's normal least-latency or proximity-based routing.

Answer

Incorrect health check configuration causing backends to be marked unhealthy

Answer

Firewall rules blocking traffic from the load balancer's health check probes

Answer

The load balancer is not enabled for global access

Question 13

Which TWO considerations are important when designing a VPC peering strategy between multiple projects in Google Cloud?

Accepted Answer

Subnet IP ranges in peered VPCs must not overlap. Option B is correct because VPC peering requires that subnet IP ranges in peered VPCs do not overlap. This is a fundamental constraint of VPC peering in Google Cloud: if two VPCs have overlapping CIDR blocks, routes cannot be exchanged unambiguously, and the peering connection will fail to establish or will cause routing conflicts. Overlapping ranges would break the ability to route traffic correctly between the VPCs, as there would be no way to determine which subnet a packet should be delivered to.

Answer

Peering is transitive by default

Answer

Firewall rules in one VPC automatically apply to peered VPCs

Answer

VPC peering can only be used within the same project

Question 14

Which THREE actions should you take to secure a VPC that hosts public-facing web applications?

Accepted Answer

Use Cloud NAT to allow outbound internet access without public IPs. Cloud NAT enables outbound internet access for private VMs without assigning them public IP addresses, which reduces the attack surface. This is a secure alternative to direct internet access because it allows outbound connections initiated by the VMs while blocking unsolicited inbound traffic from the internet. It works by translating private IP addresses to a set of ephemeral public IPs managed by Google Cloud.

Answer

Assign public IP addresses to all VMs for direct internet access

Answer

Enable VPC Flow Logs to block malicious traffic

Question 15

A company has a VPC with multiple subnets. They want to restrict traffic between two specific subnets (10.0.1.0/24 and 10.0.2.0/24) while allowing all other traffic. They create a firewall rule with priority 1000 denying ingress from 10.0.1.0/24 to 10.0.2.0/24. However, traffic is still allowed. What is the most likely reason?

Accepted Answer

There is a higher priority allow rule that matches the traffic. Option C is correct because in Google Cloud VPC firewall rules, lower priority numbers indicate higher precedence. A rule with priority 1000 is evaluated after any rule with a priority lower than 1000 (e.g., priority 65535 is the default allow rule). If a higher priority (lower number) allow rule exists that matches the same traffic, it will override the deny rule. The default VPC firewall rules include an implicit allow rule for egress and an ingress allow rule for traffic within the same VPC, which may have a higher priority than 1000, thus permitting the traffic despite the deny rule.

Answer

The rule is incorrectly applied to the wrong network tag

Answer

The traffic is going through the metadata server

Answer

Firewall rules are stateless, so return traffic is blocked