Question 187 of 1,000
Enterprise Firewall and VDOMseasyMultiple SelectObjective-mapped

Quick Answer

The answer is to configure the FortiGate to send logs to FortiAnalyzer and then add the FortiGate as a managed device on FortiAnalyzer. This is correct because FortiAnalyzer requires a registered device to establish a trusted log-receiving relationship; without adding the FortiGate as a managed unit, the FortiAnalyzer will reject incoming logs even if the FortiGate is configured to send them. On the Fortinet NSE 7 Advanced Security NSE7 exam, this scenario tests your understanding of the log-collection workflow, particularly when multiple VDOMs are involved—a common trap is assuming that simply pointing the FortiGate to the FortiAnalyzer IP is enough, but the device must also be explicitly added and authorized on the FortiAnalyzer side. Remember the memory tip: “Send first, then add—logs land only when both sides are glad.”

NSE7 Enterprise Firewall and VDOMs Practice Question

This NSE7 practice question tests your understanding of enterprise firewall and vdoms. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.

A FortiGate administrator wants to use FortiAnalyzer to view traffic logs from multiple VDOMs. Which TWO steps must the administrator perform on FortiAnalyzer?

Question 1easymulti select
Full question →

Answer choices

Why each option matters

Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.

Correct answer & explanation

Add the FortiGate as a device in FortiAnalyzer

Option B is correct because FortiAnalyzer must have the FortiGate added as a managed device in order to receive and process logs from it. This registration establishes the trust relationship and log-receiving configuration between the two systems.

Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.

Answer analysis

Option-by-option breakdown

For each option: why learners choose it and why it is or isn't the right answer here.

  • Install a security profile on FortiAnalyzer

    Why it's wrong here

    Security profiles are not installed on FortiAnalyzer.

  • Add the FortiGate as a device in FortiAnalyzer

    Why this is correct

    Device registration is required.

    Related concept

    Read the scenario before looking for a memorised answer.

  • Create a separate ADOM for each VDOM

    Why it's wrong here

    Not required; logs can be separated by filters.

  • Configure the FortiGate to send logs to FortiAnalyzer

    Why this is correct

    Log shipping must be enabled on the FortiGate.

    Related concept

    Read the scenario before looking for a memorised answer.

  • Enable FortiAnalyzer's built-in firewall

    Why it's wrong here

    Not needed for logging.

Common exam traps

Common exam trap: answer the scenario, not the keyword

The trap here is that candidates often think a separate ADOM is mandatory for each VDOM, but FortiAnalyzer can consolidate logs from multiple VDOMs into a single ADOM, and the key requirement is simply adding the FortiGate as a device and configuring log forwarding.

Detailed technical explanation

How to think about this question

When a FortiGate sends logs to FortiAnalyzer, it uses the FortiGate Log Forwarding protocol (typically over TCP/514 for syslog or TCP/3000 for FortiGate-specific logging). The FortiGate must be added as a device in FortiAnalyzer's device manager, which generates a unique device ID and enables log parsing and correlation across VDOMs. Without this step, FortiAnalyzer will reject or misclassify incoming logs.

KKey Concepts to Remember

  • Read the scenario before looking for a memorised answer.
  • Find the constraint that changes the correct option.
  • Eliminate answers that are true in general but not in this case.

TExam Day Tips

  • Watch for words such as best, first, most likely and least administrative effort.
  • Review why wrong options are wrong, not only why the correct option is correct.

Key takeaway

Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.

Real-world example

How this comes up in practice

A practitioner preparing for the NSE7 exam encounters this exact type of scenario on the job. The correct answer here is not the most general option — it is the best answer for the specific constraint described. Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option. Real exam questions reward reading the full scenario before eliminating options, because the constraint defines which answer fits.

What to study next

Got this wrong? Here's your next step.

Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.

Related practice questions

Related NSE7 practice-question pages

Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.

Practice this exam

Start a free NSE7 practice session

Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.

FAQ

Questions learners often ask

What does this NSE7 question test?

Enterprise Firewall and VDOMs — This question tests Enterprise Firewall and VDOMs — Read the scenario before looking for a memorised answer..

What is the correct answer to this question?

The correct answer is: Add the FortiGate as a device in FortiAnalyzer — Option B is correct because FortiAnalyzer must have the FortiGate added as a managed device in order to receive and process logs from it. This registration establishes the trust relationship and log-receiving configuration between the two systems.

What should I do if I get this NSE7 question wrong?

Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.

What is the key concept behind this question?

Read the scenario before looking for a memorised answer.

About these practice questions

Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →

How Courseiva writes practice questions · Editorial policy

Last reviewed: Jun 24, 2026

Question Discussion

Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.

Loading comments…

Sign in to join the discussion.

This NSE7 practice question is part of Courseiva's free Fortinet certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the NSE7 exam.