Courseiva
← Back to ENCOR 350-401 questions

Scenario-based practice

IPv6 Configuration Scenarios

Practise ENCOR 350-401 practice questions — original exam-style scenarios covering every exam domain, with detailed explanations, wrong-answer analysis, and common exam traps.

Start full practice testRead exam guide
7
scenario questions
350-401
exam code
Cisco
vendor

Scenario guide

How to approach ipv6 configuration scenarios

IPv6 questions test address types (global unicast, link-local, multicast, anycast), address assignment (SLAAC, DHCPv6, EUI-64), OSPFv3, and dual-stack. The CCNA often presents an IPv6 address and asks you to identify the prefix, type, or calculate the EUI-64 interface ID.

Quick answer

IPv6 questions usually test address types (link-local, global unicast, ULA), autoconfiguration (SLAAC), Neighbor Discovery Protocol and the differences from IPv4.

IPv6 address types and their scopes (link-local, global unicast, multicast, ULA).

SLAAC vs DHCPv6 vs stateful assignment.

Neighbor Discovery Protocol replacing ARP.

IPv6 routing differences and dual-stack coexistence.

Related practice questions

Related 350-401 topic practice pages

Scenario questions usually connect to one or more exam topics. Use these links to review the underlying concepts behind the scenario.

Architecture practice questions

Sharpen your 350-401 knowledge of Architecture.

Virtualization practice questions

Practise 350-401 questions linked to Virtualization.

Infrastructure practice questions

Work through 350-401 questions on Infrastructure.

Network Assurance practice questions

Sharpen your 350-401 knowledge of Network Assurance.

Security practice questions

Security practice questions for 350-401.

Automation practice questions

Targeted 350-401 practice covering Automation.

ENCOR BGP practice questions

Practise eBGP/iBGP peering, path attributes, route selection and BGP troubleshooting.

ENCOR OSPF practice questions

Practise OSPF area types, LSA types, neighbour states and multi-area design.

ENCOR EIGRP practice questions

Practise EIGRP DUAL, metrics, stub routing and route redistribution.

ENCOR VLANs and trunking practice questions

Practise VLAN configuration, trunk negotiation and inter-VLAN routing.

ENCOR STP practice questions

Practise RSTP, MSTP, port roles and STP protection features.

ENCOR ACLs and CoPP practice questions

Practise extended ACLs, CoPP rate-limiting and control-plane protection.

Practice set

Practice scenarios

Question 1mediumdrag order
Read the full DHCP explanation →

Drag and drop the steps of stateless DHCPv6 address assignment steps into the correct order, from first to last.

Drag steps to the numbered slots on the right, or tap a step then tap a slot.

Steps
Order
1Step 1
2Step 2
3Step 3
4Step 4
5Step 5
Question 2mediummatching
Read the full DHCP explanation →

Drag and drop each DHCPv6 mode on the left to its matching address assignment method on the right.

Drag a concept onto its matching description — or click a concept then click the description.

Concepts
Matches

DHCPv6 server assigns IPv6 addresses and other parameters

DHCPv6 server provides only options (e.g., DNS), addresses via SLAAC

Host generates its own IPv6 address using router advertisements

DHCPv6 prefix delegation for assigning subnets

Router Advertisement used in SLAAC to convey prefix and other info

Question 3hardmatching
Study the full ACL explanation →

Drag and drop each IPv6 ACL feature on the left to its matching IPv4 ACL equivalent on the right.

Drag a concept onto its matching description — or click a concept then click the description.

Concepts
Matches

Equivalent to ip access-list extended in IPv4

Equivalent to deny ip in IPv4 extended ACL

Equivalent to permit tcp in IPv4 extended ACL

Equivalent to sequence number in IPv4 named ACL

Equivalent to implicit deny ip in IPv4 ACL

Question 4mediumdrag order
Review the full OSPF breakdown →

Drag and drop the steps of OSPFv3 IPv6 neighbor adjacency formation into the correct order, from first to last.

Drag steps to the numbered slots on the right, or tap a step then tap a slot.

Steps
Order
1Step 1
2Step 2
3Step 3
4Step 4
5Step 5
Question 5mediummultiple choice
Review the full OSPF breakdown →

Examine the following configuration for a Cisco IOS-XE device:

interface GigabitEthernet0/0
 ip address 10.0.0.1 255.255.255.252

ipv6 address 2001:db8::1/64 ipv6 ospf 1 area 0 !

interface GigabitEthernet0/1
 ip address 192.168.1.1 255.255.255.0

ipv6 address 2001:db8:1::1/64 ipv6 ospf 1 area 0 ! ipv6 router ospf 1 router-id 2.2.2.2

Which statement is true about OSPFv3 operation?

Question 6mediumdrag order
Study the full IPv6 explanation →

Drag and drop the steps of NAT64 IPv6-to-IPv4 translation flow into the correct order, from first to last.

Drag steps to the numbered slots on the right, or tap a step then tap a slot.

Steps
Order
1Step 1
2Step 2
3Step 3
4Step 4
5Step 5
Question 7mediumdrag order
Study the full IPv6 explanation →

Drag and drop the steps of NAT64 IPv6-to-IPv4 translation flow into the correct order, from first to last.

Drag steps to the numbered slots on the right, or tap a step then tap a slot.

Steps
Order
1Step 1
2Step 2
3Step 3
4Step 4
5Step 5

These 350-401 practice questions are part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style 350-401 questions with detailed explanations, topic-based practice, mock exams, readiness tracking, and study analytics.