mediumMultiple ChoiceObjective-mapped
300-410 Practice Question: Runs the following command on Router R1: R1# show…
A network engineer runs the following command on Router R1:
R1# show ip vrf detail RED
VRF RED (VRF Id = 1); default RD <not set>
Interfaces:
GigabitEthernet0/2 Loopback1 Address family IPV4 (Table ID = 1):
No Export VPN route-target communities
No Import VPN route-target communities
No import route-map
No export route-mapVRF label distribution protocol: not configured Address family IPV6 (Table ID = 0x1E000001):
No Export VPN route-target communities
No Import VPN route-target communities
No import route-map
No export route-mapVRF label distribution protocol: not configured
Based on this output, which statement is correct?
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
The VRF RED includes two interfaces: GigabitEthernet0/2 and Loopback1.
The 'show ip vrf detail RED' command shows detailed VRF information. It lists interfaces GigabitEthernet0/2 and Loopback1. The RD is not set, which is common for VRF-Lite (no MPLS). There are no route-target communities, which is expected for VRF-Lite.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
The VRF RED has a Route Distinguisher configured.
Why it's wrong here
The output shows 'default RD <not set>'.
- ✓
The VRF RED includes two interfaces: GigabitEthernet0/2 and Loopback1.
Why this is correct
The output lists these two interfaces under VRF RED.
- ✗
The VRF RED has an export route-map configured.
Why it's wrong here
The output shows 'No export route-map'.
- ✗
The VRF RED is configured for MPLS label distribution.
Why it's wrong here
The output shows 'VRF label distribution protocol: not configured'.
Go deeper
Related to this question
Learn chapter
Introduction to ENARSI Exam and Network Fundamentals
Key term
LDP Protocol
LDP, or Label Distribution Protocol, is a protocol that routers use to automatically exchange labels that enable MPLS (Multiprotocol Label Switching) to create fast, efficient paths for data packets across a network.
Key term
MPLS Layer 3 VPN
A technology that uses Multiprotocol Label Switching to create secure, scalable virtual private networks that connect multiple sites at the network layer, where the service provider manages routing between customer sites.
About these practice questions
One of 1,966 original 300-410 practice questions on Courseiva, each with a full explanation and wrong-answer analysis — not exam dumps or protected exam content. Learn why practice questions differ from exam dumps →
JA
Written by Johnson Ajibi, MSc IT Security
Senior Network & Security Engineer · founder of Courseiva
This 300-410 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 300-410 exam.