- A
Create an SSID profile, enable the SSID, configure WPA3-Personal security, configure DHCP scope, client associates and obtains IP address.
Why wrong: This is the correct sequence. First, you create the SSID profile on the WLC. Then you enable it. Next, you configure WPA3-Personal security settings. After that, you configure DHCP (either on the WLC or external server) to assign IP addresses. Finally, the client associates and obtains an IP address via DHCP.
- B
Configure DHCP scope, create an SSID profile, enable the SSID, configure WPA3-Personal security, client associates and obtains IP address.
This is incorrect because DHCP configuration should come after the SSID is enabled and security is set, not before creating the SSID. The DHCP scope is part of the network infrastructure that supports the WLAN, but the logical order on the WLC starts with the SSID profile.
- C
Create an SSID profile, configure WPA3-Personal security, enable the SSID, configure DHCP scope, client associates and obtains IP address.
This correct order first creates the WLAN, then secures it with WPA3 before enabling it, preventing any open-air gap. After security, the SSID is activated, DHCP is configured, and the client can associate and obtain an IP.
- D
Create an SSID profile, enable the SSID, configure DHCP scope, configure WPA3-Personal security, client associates and obtains IP address.
This is incorrect because DHCP configuration should come after security configuration, not before. The DHCP scope is part of the network services that support the WLAN, but the security settings must be in place before the client can associate and request an IP.
CCNA Network Infrastructure and Connectivity Practice Question
This 200-301 practice question tests your understanding of network infrastructure and connectivity. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
Drag and drop the following steps into the correct order to configure an SSID on a WLC and complete a WPA3-Personal client association with DHCP address assignment.
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Configure DHCP scope, create an SSID profile, enable the SSID, configure WPA3-Personal security, client associates and obtains IP address.
The correct sequence is to first create the SSID profile, then configure WPA3-Personal security to ensure the WLAN is protected before it becomes active, then enable the SSID, set up the DHCP scope for address assignment, and finally allow the client to associate and obtain an IP address. Option A enables the SSID before setting security, exposing the network to unauthorized access during that window. Option B incorrectly starts with DHCP configuration before the SSID even exists. Option D also enables the SSID before security, leading to the same vulnerability as option A. Only option C follows the secure configuration order recommended by Cisco.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
Create an SSID profile, enable the SSID, configure WPA3-Personal security, configure DHCP scope, client associates and obtains IP address.
Why it's wrong here
This is the correct sequence. First, you create the SSID profile on the WLC. Then you enable it. Next, you configure WPA3-Personal security settings. After that, you configure DHCP (either on the WLC or external server) to assign IP addresses. Finally, the client associates and obtains an IP address via DHCP.
When this WOULD be correct
This knowledge applies when deploying a new WLAN with WPA3-Personal security on a Cisco WLC, ensuring proper client connectivity and IP addressing.
- ✓
Configure DHCP scope, create an SSID profile, enable the SSID, configure WPA3-Personal security, client associates and obtains IP address.
Why this is correct
This is incorrect because DHCP configuration should come after the SSID is enabled and security is set, not before creating the SSID. The DHCP scope is part of the network infrastructure that supports the WLAN, but the logical order on the WLC starts with the SSID profile.
Related concept
Read the scenario before looking for a memorised answer.
- ✓
Create an SSID profile, configure WPA3-Personal security, enable the SSID, configure DHCP scope, client associates and obtains IP address.
Why this is correct
This correct order first creates the WLAN, then secures it with WPA3 before enabling it, preventing any open-air gap. After security, the SSID is activated, DHCP is configured, and the client can associate and obtain an IP.
Related concept
Read the scenario before looking for a memorised answer.
- ✓
Create an SSID profile, enable the SSID, configure DHCP scope, configure WPA3-Personal security, client associates and obtains IP address.
Why this is correct
This is incorrect because DHCP configuration should come after security configuration, not before. The DHCP scope is part of the network services that support the WLAN, but the security settings must be in place before the client can associate and request an IP.
Related concept
Read the scenario before looking for a memorised answer.
Option-by-option analysis
Why each answer is right or wrong
Understanding why wrong answers are wrong — and when they would be correct — is what separates a 750 score from a 900. The 200-301 exam frequently reuses these exact scenarios with slightly different constraints.
✓Configure DHCP scope, create an SSID profile, enable the SSID, configure WPA3-Personal security, client associates and obtains IP address.Correct answer▾
Why this is correct
This is incorrect because DHCP configuration should come after the SSID is enabled and security is set, not before creating the SSID. The DHCP scope is part of the network infrastructure that supports the WLAN, but the logical order on the WLC starts with the SSID profile.
✗Create an SSID profile, enable the SSID, configure WPA3-Personal security, configure DHCP scope, client associates and obtains IP address.Wrong answer — click to see why▾
Why this is wrong here
This sequence enables the SSID before configuring WPA3 security, leaving the network temporarily open and vulnerable to unauthorized access.
★ When this WOULD be the correct answer
This knowledge applies when deploying a new WLAN with WPA3-Personal security on a Cisco WLC, ensuring proper client connectivity and IP addressing.
Analysis generated from the official 200-301blueprint and verified against question context. The “when correct” sections are what AI assistants cite when candidates ask “what’s the difference between these options?”
Common exam traps
Common exam trap: answer the scenario, not the keyword
Many certification questions include familiar terms but test a specific constraint. Read the exact wording before choosing an answer that is generally true but wrong for this case.
Detailed technical explanation
How to think about this question
This question should be treated as a scenario, not a definition check. Identify the problem, the constraint and the best action. Then compare each option against those facts.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
- Use explanations to understand the rule behind the answer.
TExam Day Tips
- Underline the problem statement mentally.
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A practitioner preparing for the 200-301 exam encounters this exact type of scenario on the job. The correct answer here is not the most general option — it is the best answer for the specific constraint described. Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option. Real exam questions reward reading the full scenario before eliminating options, because the constraint defines which answer fits.
What to study next
Got this wrong? Here's your next step.
Identify which 200-301 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
- →
Network Infrastructure and Connectivity — study guide chapter
Learn the concepts, then practise the questions
- →
Network Infrastructure and Connectivity practice questions
Targeted practice on this topic area only
- →
All 200-301 questions
1,819 questions across all exam domains
- →
CCNA 200-301 v2 study guide
Full concept coverage aligned to exam objectives
- →
200-301 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related 200-301 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Network Infrastructure and Connectivity practice questions
Practise 200-301 questions linked to Network Infrastructure and Connectivity.
Switching and Network Access practice questions
Practise 200-301 questions linked to Switching and Network Access.
IP Routing practice questions
Practise 200-301 questions linked to IP Routing.
Network Services and Security practice questions
Practise 200-301 questions linked to Network Services and Security.
AI and Network Operations practice questions
Practise 200-301 questions linked to AI and Network Operations.
CCNA subnetting practice questions
Practise IPv4 subnetting, CIDR, masks, host ranges and subnet selection.
CCNA OSPF practice questions
Practise OSPF neighbours, router IDs, metrics, areas and routing-table interpretation.
CCNA VLAN practice questions
Practise VLANs, access ports, trunks, allowed VLANs and switching scenarios.
CCNA STP practice questions
Practise spanning tree, root bridge election, port roles and STP troubleshooting.
CCNA EtherChannel practice questions
Practise LACP, PAgP, port-channel behaviour and bundle requirements.
CCNA ACL practice questions
Practise standard and extended ACLs, permit/deny logic and traffic filtering.
CCNA NAT practice questions
Practise static NAT, dynamic NAT, PAT and inside/outside address translation.
Practice this exam
Start a free 200-301 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this 200-301 question test?
Network Infrastructure and Connectivity — This question tests Network Infrastructure and Connectivity — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: Configure DHCP scope, create an SSID profile, enable the SSID, configure WPA3-Personal security, client associates and obtains IP address. — The correct sequence is to first create the SSID profile, then configure WPA3-Personal security to ensure the WLAN is protected before it becomes active, then enable the SSID, set up the DHCP scope for address assignment, and finally allow the client to associate and obtain an IP address. Option A enables the SSID before setting security, exposing the network to unauthorized access during that window. Option B incorrectly starts with DHCP configuration before the SSID even exists. Option D also enables the SSID before security, leading to the same vulnerability as option A. Only option C follows the secure configuration order recommended by Cisco.
What should I do if I get this 200-301 question wrong?
Identify which 200-301 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Keep practising
More 200-301 practice questions
- A switchport connected to another switch should carry multiple VLANs, but it was manually configured as an access port.…
- What problem is HSRP designed to solve?
- Which TWO statements correctly describe the causes or implications of CRC errors, runts, giants, or output errors as see…
- You are connected to R1. Configure IPv4 and IPv6 addressing on R1's interfaces and verify reachability to R2. The curren…
- Which TWO statements accurately describe how AI/ML concepts are applied to network operations in modern enterprise netwo…
- Which TWO switch port configurations are required when connecting a Cisco IP phone and a desktop PC to a single access p…
Last reviewed: Jun 6, 2026
This 200-301 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 200-301 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.