- A
Use S3 Glacier Deep Archive as the destination for the lifecycle transition.
Deep Archive is the lowest-cost storage class for long-term retention.
- B
Store the data in S3 Standard.
Why wrong: S3 Standard is costly for infrequent access.
- C
Enable S3 Versioning to protect against accidental deletion.
Why wrong: Versioning increases storage costs.
- D
Configure an S3 Lifecycle policy to transition objects to S3 Glacier Deep Archive after 30 days.
Lifecycle policies automate cost-effective transitions.
- E
Use S3 Intelligent-Tiering to automatically optimize costs.
Why wrong: Intelligent-Tiering has a monitoring fee and may not be cheapest for archival.
SOA-C02 Cost and Performance Optimization Practice Question
This SOA-C02 practice question tests your understanding of cost and performance optimization. Read the scenario carefully and evaluate each option against the stated constraints before committing to an answer. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A SysOps administrator wants to reduce the cost of storing infrequently accessed data in Amazon S3. The data must be retained for 10 years for compliance. Which TWO actions should the administrator take? (Choose TWO.)
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Use S3 Glacier Deep Archive as the destination for the lifecycle transition.
Correct options: B and D. Option B is correct because S3 Lifecycle policies can transition objects to lower-cost storage classes over time. Option D is correct because S3 Glacier Deep Archive is the cheapest storage class for long-term archival. Option A is wrong because S3 Standard is expensive for infrequent access. Option C is wrong because S3 Intelligent-Tiering has a monitoring cost and is best for unknown access patterns. Option E is wrong because enabling versioning increases storage costs due to multiple versions.
Key principle: NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
Use S3 Glacier Deep Archive as the destination for the lifecycle transition.
Why this is correct
Deep Archive is the lowest-cost storage class for long-term retention.
Related concept
Static NAT maps one inside address to one outside address.
- ✗
Store the data in S3 Standard.
Why it's wrong here
S3 Standard is costly for infrequent access.
- ✗
Enable S3 Versioning to protect against accidental deletion.
Why it's wrong here
Versioning increases storage costs.
- ✓
Configure an S3 Lifecycle policy to transition objects to S3 Glacier Deep Archive after 30 days.
Why this is correct
Lifecycle policies automate cost-effective transitions.
Related concept
Static NAT maps one inside address to one outside address.
- ✗
Use S3 Intelligent-Tiering to automatically optimize costs.
Why it's wrong here
Intelligent-Tiering has a monitoring fee and may not be cheapest for archival.
Common exam traps
Common exam trap: NAT rules depend on direction and matching traffic
NAT is not only about the public address. The inside/outside interface roles and the ACL or rule that matches traffic are just as important.
Detailed technical explanation
How to think about this question
NAT questions usually test address translation, overload/PAT behaviour, static mappings and whether the right traffic is being translated. Read the interface direction and address terms carefully.
KKey Concepts to Remember
- Static NAT maps one inside address to one outside address.
- PAT allows many inside hosts to share one public address using ports.
- Inside local and inside global describe the private and translated addresses.
- NAT ACLs identify traffic for translation, not always security filtering.
TExam Day Tips
- Identify inside and outside interfaces first.
- Check whether the scenario needs static NAT, dynamic NAT or PAT.
- Do not confuse NAT matching ACLs with normal packet-filtering intent.
Key takeaway
NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.
Real-world example
How this comes up in practice
A startup's cloud architect reviews their monthly bill and notices costs are higher than expected for a long-running batch job. Switching from on-demand instances to Reserved Instances — or using Spot/Preemptible VMs — can reduce compute costs by up to 72 %. Questions like this test whether you understand the tradeoffs between commitment, flexibility, and cost across cloud pricing models.
What to study next
Got this wrong? Here's your next step.
Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related SOA-C02 NAT questions on configuration and troubleshooting.
- →
Cost and Performance Optimization — study guide chapter
Learn the concepts, then practise the questions
- →
Cost and Performance Optimization practice questions
Targeted practice on this topic area only
- →
All SOA-C02 questions
1,546 questions across all exam domains
- →
AWS Certified SysOps Administrator Associate SOA-C02 study guide
Full concept coverage aligned to exam objectives
- →
SOA-C02 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related SOA-C02 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Monitoring, Logging, and Remediation practice questions
Practise SOA-C02 questions linked to Monitoring, Logging, and Remediation.
Reliability and Business Continuity practice questions
Practise SOA-C02 questions linked to Reliability and Business Continuity.
Deployment, Provisioning, and Automation practice questions
Practise SOA-C02 questions linked to Deployment, Provisioning, and Automation.
Security and Compliance practice questions
Practise SOA-C02 questions linked to Security and Compliance.
Networking and Content Delivery practice questions
Practise SOA-C02 questions linked to Networking and Content Delivery.
Cost and Performance Optimization practice questions
Practise SOA-C02 questions linked to Cost and Performance Optimization.
SOA-C02 fundamentals practice questions
Practise SOA-C02 questions linked to SOA-C02 fundamentals.
SOA-C02 scenario practice questions
Practise SOA-C02 questions linked to SOA-C02 scenario.
SOA-C02 troubleshooting practice questions
Practise SOA-C02 questions linked to SOA-C02 troubleshooting.
Practice this exam
Start a free SOA-C02 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this SOA-C02 question test?
Cost and Performance Optimization — This question tests Cost and Performance Optimization — Static NAT maps one inside address to one outside address..
What is the correct answer to this question?
The correct answer is: Use S3 Glacier Deep Archive as the destination for the lifecycle transition. — Correct options: B and D. Option B is correct because S3 Lifecycle policies can transition objects to lower-cost storage classes over time. Option D is correct because S3 Glacier Deep Archive is the cheapest storage class for long-term archival. Option A is wrong because S3 Standard is expensive for infrequent access. Option C is wrong because S3 Intelligent-Tiering has a monitoring cost and is best for unknown access patterns. Option E is wrong because enabling versioning increases storage costs due to multiple versions.
What should I do if I get this SOA-C02 question wrong?
Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related SOA-C02 NAT questions on configuration and troubleshooting.
What is the key concept behind this question?
Static NAT maps one inside address to one outside address.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jun 20, 2026
This SOA-C02 practice question is part of Courseiva's free Amazon Web Services certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the SOA-C02 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.