Databricks-Spark-Assoc Spark Architecture and Components Practice Test 1 — 15 Questions

Question 1

Refer to the exhibit. Based on the provided Spark configuration, what is the total amount of executor memory available to the application for data processing?

Accepted Answer

16 GB. Total executor memory is calculated by multiplying the number of instances by the memory per instance. Here, 4 instances at 4GB each equals 16GB. This metric is fundamental for capacity planning; developers must understand the aggregate resource footprint to avoid provisioning failures or out-of-memory errors. It is essential to ensure that the sum of these resources fits within the cluster's available capacity to prevent pending jobs.

Answer

8 GB

Answer

32 GB

Answer

4 GB

Question 2

Which TWO of the following are true regarding the relationship between partitions and parallelism in Spark?

Accepted Answer

Each partition corresponds to a single task.. Parallelism in Spark is directly controlled by the number of partitions. Each task processes one partition; therefore, having too few partitions leads to under-utilization of cluster resources, while too many leads to excessive scheduling overhead. Understanding this relationship is vital for performance tuning, as developers must balance the partition count to ensure that tasks are small enough to run concurrently but large enough to justify the overhead of task scheduling.

Answer

Increasing partitions always improves performance.

Answer

The number of partitions is determined by the Cluster Manager.

Answer

Partitions are only created during the shuffle stage.

Question 3

Refer to the exhibit. Given the provided Spark configuration, what is the maximum number of concurrent tasks that can be processed at once across the entire cluster?

Accepted Answer

8. The number of concurrent tasks is determined by the total number of cores available across all executors. By multiplying the number of executor instances (4) by the number of cores per executor (2), we determine that the cluster can handle 8 concurrent tasks. This calculation is foundational for understanding cluster capacity and avoiding resource contention when configuring parallelism for large datasets during wide transformations or shuffle-heavy operations.

Answer

4

Answer

6

Answer

16

Question 4

Which THREE of the following are primary components of the Spark architecture's physical execution plan generation?

Accepted Answer

Catalyst Optimizer. The physical execution plan is critical because it determines how Spark will actually perform the data processing. By understanding the roles of the DAG Scheduler, Task Scheduler, and the Catalyst Optimizer, developers can troubleshoot performance issues, understand why certain plans are generated, and optimize their code. These components work together to turn high-level transformations into efficient, distributed tasks that minimize data shuffling and maximize compute throughput across the cluster nodes.

Answer

Cluster Resource Manager

Answer

Spark SQL Parser

Question 5

Which THREE of the following factors contribute to the total amount of memory available for Spark application tasks?

Accepted Answer

JVM Heap Size configured via spark.executor.memory.. Memory management is a common source of performance issues in Spark. Understanding that the total available memory is a combination of heap space, execution memory, and storage memory is vital for tuning. If these are not configured correctly based on the workload—such as heavy caching vs. large shuffle operations—the application will face frequent garbage collection or OOM errors, directly impacting performance and reliability in large-scale data environments.

Answer

Network bandwidth between the Driver and the worker nodes.

Answer

The total number of cores available on the master node.

Question 6

Which TWO of the following statements accurately describe the relationship between Spark Stages and Task execution?

Accepted Answer

A single stage can contain multiple narrow transformations that are executed as a single pipeline.. Stages are boundaries created by shuffle operations, allowing Spark to group narrow transformations together for pipelined execution. Each stage consists of multiple tasks, each corresponding to a partition of the data. Tasks are the smallest unit of work in Spark, executing on executors, and their parallelism is dictated by the number of partitions in the RDD or DataFrame, making understanding this relationship vital for optimizing cluster resource utilization.

Answer

A stage can be executed in parallel only if it does not contain a shuffle dependency.

Answer

Tasks are assigned to stages based on the cluster manager's current CPU availability.

Answer

Shuffle operations always trigger the execution of two separate stages.

Question 7

Refer to the exhibit. Based on the provided configuration, what is the size of the storage pool in bytes available for cached data on each executor?

Accepted Answer

1,288,490,189 bytes. The storage pool is calculated as (spark.executor.memory * spark.memory.fraction * spark.memory.storageFraction). With 4GB total memory, 60% is used for unified memory (2.4GB), and 50% of that unified memory is allocated to the storage pool (1.2GB). Converting 1.2GB to bytes results in approximately 1,288,490,189 bytes. Understanding these memory management calculations is critical for tuning Spark applications to prevent cache eviction and out-of-memory errors during heavy processing.

Answer

1,073,741,824 bytes

Answer

2,147,483,648 bytes

Answer

2,576,980,378 bytes

Question 8

Which property correctly defines the maximum number of cores an executor can use, and why is this setting important for Spark parallelism?

Accepted Answer

spark.executor.cores. The 'spark.executor.cores' property determines how many concurrent tasks a single executor can run. This is a critical tuning parameter because if this value is too high, it may cause memory contention, as multiple tasks compete for the same heap space on the executor. If set too low, it may underutilize the available CPU resources on the worker node, leading to suboptimal cluster throughput for CPU-bound Spark workloads.

Answer

spark.cores.max

Answer

spark.task.cpus

Answer

spark.default.parallelism

Question 9

Which component allows Spark to maintain fault tolerance by tracking the lineage of RDDs and recomputing lost partitions?

Accepted Answer

BlockManager. The DAGScheduler is responsible for recording the lineage of operations performed on RDDs. Because RDDs are immutable and lazily evaluated, Spark can reconstruct any lost partition by re-applying the sequence of transformations (lineage) to the original parent data. This design avoids the overhead of frequent checkpointing and enables highly efficient recovery from executor failures during the execution of a job.

Answer

TaskScheduler

Answer

SchedulerBackend

Answer

MapOutputTracker

Question 10

Which THREE components are provided by the Databricks control plane, distinct from the customer-managed compute cluster?

Accepted Answer

The notebook application and job scheduling service.. Databricks uses a dual-plane architecture: the control plane and the data plane. The control plane handles the management and orchestration aspects, while the data plane hosts the actual clusters. Distinguishing between these is essential for security and compliance audits, as it helps administrators understand where user code, credentials, and persistent data reside versus where the compute infrastructure is actually provisioned within the customer's cloud account.

Answer

The Spark Executors and Worker nodes.

Answer

The persistent cloud storage (e.g., S3 buckets).

Question 11

Which architectural component is responsible for broadcasting variables from the Driver to all Executors?

Accepted Answer

The Spark Driver. Broadcast variables are an optimization tool to reduce network traffic. The Driver manages the distribution of these read-only variables to all executors. Instead of sending the same variable with every single task, the driver sends it once per node. This reduces overhead in distributed joins or lookups, making it a critical architectural concept for optimizing performance when dealing with medium-sized reference data.

Answer

The Cluster Manager

Answer

The Executor cache

Answer

The shuffle service

Question 12

A developer runs a Spark job on a Databricks cluster using spark-submit in local mode with the master URL set to local[4]. The job reads a large CSV file and performs a filter transformation. Which component is responsible for creating the logical plan for this job?

Accepted Answer

The SparkContext in the Driver. In Spark's architecture, the Driver contains the SparkContext, which is the entry point for the application. When transformations are called on RDDs or DataFrames, the SparkContext builds a logical plan (or lineage for RDDs). This plan is later optimized and converted into a physical plan by the DAG Scheduler. Executors and Cluster Manager do not create logical plans; they handle execution and resource allocation, respectively.

Answer

The DAG Scheduler

Answer

The Cluster Manager

Answer

The Executor processes

Question 13

A Spark application is running on a Databricks cluster with adaptive query execution (AQE) enabled. The job reads a partitioned Parquet dataset, performs a join between two large tables, and then writes the result. The Spark UI shows that some tasks are taking significantly longer than others, and there is a high degree of skew in the join keys. Which TWO actions can help mitigate the skew and improve performance? (Choose two.)

Accepted Answer

Enable skew join optimization by setting spark.sql.adaptive.skewJoin.enabled to true.. Enabling AQE's skew join optimization and leveraging AQE's dynamic coalescing and skew handling directly address the skew issue by splitting large partitions and balancing tasks. Other options either do not target skew or are inappropriate for large tables. These two actions are the most effective for mitigating skew in this scenario.

Answer

Increase the number of shuffle partitions by setting spark.sql.shuffle.partitions to a higher value.

Answer

Repartition the larger table by the join key before the join to evenly distribute the data.

Answer

Use broadcast join by setting spark.sql.autoBroadcastJoinThreshold to a large value to broadcast the smaller table.

Question 14

A data engineer is running a Spark application on a Databricks cluster with 4 worker nodes, each having 8 cores. The application reads a large Parquet file and performs a groupBy aggregation. The Spark UI shows that the job is divided into multiple stages. Which statement best describes the role of the DAG Scheduler in this scenario?

Accepted Answer

It divides the job into stages based on shuffle dependencies and submits each stage as a set of tasks to the Task Scheduler.. The DAG Scheduler converts the logical plan into a physical execution plan of stages, splitting at shuffle boundaries. For a groupBy aggregation, it creates stages for partial and final aggregation. It then submits tasks for each stage to the Task Scheduler, which launches them on executors. This stage-oriented scheduling is fundamental to Spark's execution model.

Answer

It optimizes the physical plan by applying rule-based transformations such as predicate pushdown and constant folding.

Answer

It manages the allocation of cluster resources by negotiating with the cluster manager for executor containers.

Answer

It monitors the health of executors and reschedules failed tasks on different executors.

Question 15

A developer is writing a Spark application that uses a broadcast variable to distribute a small lookup table to all executors. The developer wants to ensure the broadcast variable is efficiently shared without being serialized with every task. Which component is responsible for distributing the broadcast variable from the Driver to the executors?

Accepted Answer

The Block Manager on each executor, which receives and stores the broadcast data.. The Block Manager on executors is responsible for receiving and storing broadcast variables. It uses an efficient distribution protocol to share the data across executors, ensuring that each executor has a local copy. This avoids serializing the broadcast variable with every task, which is the key benefit of using broadcast variables.

Answer

The Task Scheduler, which serializes and sends broadcast variables with each task.

Answer

The Cluster Manager, which allocates resources and propagates broadcast variables to executors.

Answer

The DAG Scheduler, which partitions the broadcast data into stages for distribution.